All

Manufacturer: Enpac, Manufacturer Part Number: 4730-BKMAINTENANCE BLANKET – The ENPAC Maintenance Blanket is designed to be utilized under vehicles or leaking equipment. The blanket is made of 8–oz. non–woven geo–textile material, that is 100–mils thick, backed by 1 layer of 20–mil fuel/chemical resistant polyethylene. The blanket provides a protective sorbent pad between the maintenance item (usually a road grader blade) and the placement area. The fabric backing provides an extra barrier that, if not punctured, stops any hydrocarbon from getting to the ground. The blanket can be rolled or folded into a compact lightweight unit. It is an inexpensive alternative to heavy/costlier fabric mats.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Vestil, Manufacturer Part Number: JIB-P-10-10-8Span: 10 ft, Usable Height: 8 ft, Capacity: 1000 lbs. – Multi–Station Transportable Jib Cranes – Designed for use in multiple locations, includes jib crane and one base socket. Extra base sockets may be purchased for use in other locations. Friction brake design allows positive locking and controlled rotation of heavy loads. 360° continuous rotation of heavy loads. Handle most applications up to 1,000 lbs. and up to 120" radius reach. Standard 4" high I–beam on all units with 2.663" flange width. Rugged welded steel construction. Hoist and trolley sold separately.

Manufacturer: Aleco, Manufacturer Part Number: 455042Energy saving PVC strip doors. Formulated with standard (indoor/outdoor) ingredients, the operating temperature range is –10 degrees to 150 degrees F. Smooth crystal–clear material. Overlaps ensure easy access while controlling the loss of heated or cooled air. Includes 2 each orange safety strips to outline the opening. Patented MaxBullet–HTP® (high–tensile polymer) mounting system has completely revolutionized the way strip doors are installed. No bolts, nuts, bars, etc. Pre–punched strips simply and securely snap onto bullet shaped studs. Lifetime guarantee on mounting hardware against breakage.SPECIFICATIONSIncludes 2 each orange safety strips - MaxBullet-HTP-Silver mounting system12"x.120 PVC strips, 66% overlap36.5" x 14.25" x 9.25" - 126 lbs.

Manufacturer: Aleco, Manufacturer Part Number: 455044Energy saving PVC strip doors. Formulated with standard (indoor/outdoor) ingredients, the operating temperature range is –10 degrees to 150 degrees F. Scratch–Guard Ribbed material designed for heavy traffic. Traffic flows on ribs keeping web area cleaner and clearer longer. Overlaps ensure easy access while controlling the loss of heated or cooled air. Includes 2 each orange safety strips to outline the opening. Patented MaxBullet–HTP® (high–tensile polymer) mounting system has completely revolutionized the way strip doors are installed. No bolts, nuts, bars, etc. Pre–punched strips simply and securely snap onto bullet shaped studs. Lifetime guarantee on mounting hardware against breakage.SPECIFICATIONSIncludes 2 each orange safety strips - MaxBullet-HTP-Silver mounting system12"x.216 Scratch-Guard Ribbed PVC strips, 66% overlap36.5" x 14.25" x 18.5" - 100 lbs.

Manufacturer: Aleco, Manufacturer Part Number: 455085Energy saving PVC strip doors. Formulated with standard (indoor/outdoor) ingredients, the operating temperature range is –10 degrees to 150 degrees F. Smooth crystal–clear material. Overlaps ensure easy access while controlling the loss of heated or cooled air. Includes 2 each orange safety strips to outline the opening. Patented MaxBullet–HTP® (high–tensile polymer) mounting system has completely revolutionized the way strip doors are installed. No bolts, nuts, bars, etc. Pre–punched strips simply and securely snap onto bullet shaped studs. Lifetime guarantee on mounting hardware against breakage.SPECIFICATIONSIncludes 2 each orange safety strips - MaxBullet-HTP-Silver mounting system12"x.120 PVC strips, 66% overlap36.5" x 14.25" x 9.25" - 150 lbs.

Manufacturer: Aleco, Manufacturer Part Number: 455087Energy saving PVC strip doors. Formulated with standard (indoor/outdoor) ingredients, the operating temperature range is –10 degrees to 150 degrees F. Scratch–Guard Ribbed material designed for heavy traffic. Traffic flows on ribs keeping web area cleaner and clearer longer. Overlaps ensure easy access while controlling the loss of heated or cooled air. Includes 2 each orange safety strips to outline the opening. Patented MaxBullet–HTP® (high–tensile polymer) mounting system has completely revolutionized the way strip doors are installed. No bolts, nuts, bars, etc. Pre–punched strips simply and securely snap onto bullet shaped studs. Lifetime guarantee on mounting hardware against breakage.SPECIFICATIONSIncludes 2 each orange safety strips - MaxBullet-HTP-Silver mounting system12"x.216 Scratch-Guard Ribbed PVC strips, 66% overlap36.5" x 14.25" x 18.5" - 118 lbs.

Manufacturer: Vestil, Manufacturer Part Number: JIB-CB-25-10-10Capacity: 250 lbs., I–Beam Length: 10 FT, I–Beam Height: 6", I–Beam Flange Width: 3.56", Base Height: 18" – Portable Jib Crane – Unique design allows for easy transportation of jib crane with a fork truck. Standard base included with jib crane is not filled with concrete (instructions included for proper filling). Base may be ordered pre–filled with concrete for immediate use. Base measures 42" x 42" and includes built–in fork tubes. Fork tubes are 7"W x 2"H usable. Fixed length I–beam will pivot 360 degrees for complete access. Upright vertical column bolts to base. Steel construction. Units ship knocked down. Not for use as a fork truck attachment.

Manufacturer: Vestil, Manufacturer Part Number: JIB-CB-50-10-10Capacity: 500 lbs., I–Beam Length: 10 FT, I–Beam Height: 8", I–Beam Flange Width: 4.00", Base Height: 36" – Portable Jib Crane – Unique design allows for easy transportation of jib crane with a fork truck. Standard base included with jib crane is not filled with concrete (instructions included for proper filling). Base may be ordered pre–filled with concrete for immediate use. Base measures 42" x 42" and includes built–in fork tubes. Fork tubes are 7"W x 2"H usable. Fixed length I–beam will pivot 360 degrees for complete access. Upright vertical column bolts to base. Steel construction. Units ship knocked down. Not for use as a fork truck attachment.

Manufacturer: Vestil, Manufacturer Part Number: VTR-5.5-14-10Uniform Capacity (lbs.): 7000, Working Height Minimum (in.): 12–1/2, Working Height Maximum (in.): 17–1/2, Usable Width (in.): 14, Curb Height (in.): 1–1/4 – The Aluminum Vehicle Twin Ramps provide a safe means for driving vans, pick–up trucks and some passenger vehicles from ground level into and out of high building entrances. The ramps can be securely fastened to dock with pin locks. To avoid hang–ups with the vehicle, measure the under clearance and wheelbase of the vehicle being used. The ramps have a welded aluminum construction.

Our 10'x26'x1' Heavy-Duty Spill Berm is engineered to contain hazardous spills and protect your worksite by preventing environmental contamination. Designed for industrial spill management and hazardous material control, its robust construction delivers exceptional performance in demanding settings. Made with advanced heavy-duty materials, this berm combines chemical resistance, puncture resistance, and easy deployment—ensuring you can manage spills quickly and with confidence.A Quick LookThis spill berm stands out with several practical benefits: Precisely sized at 10' x 26' x 1' Impressive sump capacity of 1,944 gallons Manufactured by Eagle (Part T8432) for trusted industrial quality Supports up to 122 lbs, providing reliable spill containment Constructed from materials known for enhanced chemical and puncture resistance Technical DetailsExperience a berm that delivers on performance: Advanced, heavy-duty construction designed for rapid deployment Exceptional stability under harsh environmental conditions Engineered for low maintenance while remaining highly resilient to active spills Safety & ComplianceWith safety in mind, this berm meets strict industrial standards and adheres to guidelines similar to EPA and SPCC criteria. Enjoy peace of mind knowing your facility is equipped to manage spills efficiently while also reducing environmental hazards.For more high-quality industrial products, visit our Eagle collection or explore additional spill management solutions in our Containment Berms collection.

Manufacturer: Vestil, Manufacturer Part Number: FHS-10-10Capacity: 10,000 lbs., Overall Beam Length/Height: 10'/10", Under I–Beam to Ground: 10', Base Width: 64.5", Flange Width: 5" – Fixed Height Steel Gantry Cranes – Industrial Steel Gantry Cranes are designed for transporting and positioning materials. Solid steel construction will provide years of service. Large 8" diameter 4 position locking swivel phenolic casters with roller bearings will facilitate easy mobility from one area to another. More economical and flexible than permanent cranes. Features quick setup design. Blue finish. Hoist and trolley sold separately. Note: All products should be inspected frequently to insure safe operation. Final testing and inspection is left to end user after final assembly has been completed.

Manufacturer: Vestil, Manufacturer Part Number: FHS-10-15Capacity: 10,000 lbs., Overall Beam Length/Height: 15'/12", Under I–Beam to Ground: 10', Base Width: 64.5", Flange Width: 6" – Fixed Height Steel Gantry Cranes – Industrial Steel Gantry Cranes are designed for transporting and positioning materials. Solid steel construction will provide years of service. Large 8" diameter 4 position locking swivel phenolic casters with roller bearings will facilitate easy mobility from one area to another. More economical and flexible than permanent cranes. Features quick setup design. Blue finish. Hoist and trolley sold separately. Note: All products should be inspected frequently to insure safe operation. Final testing and inspection is left to end user after final assembly has been completed.

Manufacturer: Wesco, Manufacturer Part Number: 260090Model #: RNR–10. Swivel casters allow movement in any direction. Hand operated hydraulic jack for easy lifting and controlled lowering of loads. All models supplied with hooks for recommended optional LB–1 or LB–2 load binders. I.D. fork span range 6" to 19.5". RNR–10 (SET) FRAME: 053612. Steel Construction. Weight Capacity: 10000 lbs. 8" Steel Casters. Raised Height: 6", Lowered Height: 0". Continuous Handle. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 260095Model #: RNR–10P. Swivel casters allow movement in any direction. Hand operated hydraulic jack for easy lifting and controlled lowering of loads. All models supplied with hooks for recommended optional LB–1 or LB–2 load binders. I.D. fork span range 6" to 19.5". RNR–10P (SET) FRAME: 053612. Steel Construction. Weight Capacity: 10000 lbs. 8" Urethane Casters. Raised Height: 6", Lowered Height: 0". Continuous Handle. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Justrite, Manufacturer Part Number: 05930ROily Waste Cans are essential whenever solvent soaked cloths and wiping rags are used. The specially designed lid is open for safe, temporary collection of biological waste. Justrite's Biohazard Waste Containers meet OSHA 29 CFR 1910.1030 for the segregation of infectious waste. They may be used to store contaminated laundry as well as other regulated waste (not to be used for sharps). Sturdy steel cans feature leakproof construction with foot–operated self–closing lid. Opens no more than 60 degrees and stay closed when not in use, isolating contents from fire sources and limiting oxygen. Round construction and elevated bottom encourage circulation of air around can to disperse heat and reduce moisture buildup and rusting. Sleek steel design with compact foot pedal leaves hand free and cover snaps shut when pedal is released. Swinging bail handle in rear makes it easy to carry and empty. FM Approved and UL Listed. 10–year warranty.

Manufacturer: Justrite, Manufacturer Part Number: 5934Oily Waste Cans are essential whenever solvent soaked cloths and wiping rags are used. The specially designed lid is open for safe, temporary collection of biological waste. Justrite's Biohazard Waste Containers meet OSHA 29 CFR 1910.1030 for the segregation of infectious waste. They may be used to store contaminated laundry as well as other regulated waste (not to be used for sharps). Sturdy steel cans feature leakproof construction with foot–operated self–closing lid. Opens no more than 60 degrees and stay closed when not in use, isolating contents from fire sources and limiting oxygen. Round construction and elevated bottom encourage circulation of air around can to disperse heat and reduce moisture buildup and rusting. Sleek steel design with compact foot pedal leaves hand free and cover snaps shut when pedal is released. Swinging bail handle in rear makes it easy to carry and empty. FM Approved and UL Listed. 10–year warranty.

Manufacturer: Justrite, Manufacturer Part Number: 5935Oily Waste Cans are essential whenever solvent soaked cloths and wiping rags are used. The specially designed lid is open for safe, temporary collection of biological waste. Justrite's Biohazard Waste Containers meet OSHA 29 CFR 1910.1030 for the segregation of infectious waste. They may be used to store contaminated laundry as well as other regulated waste (not to be used for sharps). Sturdy steel cans feature leakproof construction with foot–operated self–closing lid. Opens no more than 60 degrees and stay closed when not in use, isolating contents from fire sources and limiting oxygen. Round construction and elevated bottom encourage circulation of air around can to disperse heat and reduce moisture buildup and rusting. Sleek steel design with compact foot pedal leaves hand free and cover snaps shut when pedal is released. Swinging bail handle in rear makes it easy to carry and empty. FM Approved and UL Listed. 10–year warranty.

Manufacturer: Justrite, Manufacturer Part Number: 5930Oily Waste Cans are essential whenever solvent soaked cloths and wiping rags are used. The specially designed lid is open for safe, temporary collection of biological waste. Justrite's Biohazard Waste Containers meet OSHA 29 CFR 1910.1030 for the segregation of infectious waste. They may be used to store contaminated laundry as well as other regulated waste (not to be used for sharps). Sturdy steel cans feature leakproof construction with foot–operated self–closing lid. Opens no more than 60 degrees and stay closed when not in use, isolating contents from fire sources and limiting oxygen. Round construction and elevated bottom encourage circulation of air around can to disperse heat and reduce moisture buildup and rusting. Sleek steel design with compact foot pedal leaves hand free and cover snaps shut when pedal is released. Swinging bail handle in rear makes it easy to carry and empty. FM Approved and UL Listed. 10–year warranty.

Manufacturer: Ex-Cell Kaiser, Manufacturer Part Number: WR-10R BLACKLandscape Series™ 10–gal perforated trash receptacle with retainer bands for liners in Black Gloss. Heavy–gauge Steel with fully welded construction and bottom drainage holes prevent water build–up. Two 1" dia. Holes halfway up sides allow unit to be secured with a chain to help prevent theft. EXL–COAT™ powder coat finishes. ***A $25.00 handling fee will be added to freight for all Ex–Cell Kaiser product orders under $175.00***

Manufacturer: Ex-Cell Kaiser, Manufacturer Part Number: WR690 BLACK PERFLandscape Series™ 10–gal perforated trash receptacle with hinged drop bottom for easy emptying and welded bracket for permanent wall/pole mounting in Black Gloss. Heavy–gauge Steel with fully welded construction and bottom drainage holes prevent water build–up. Two 1" dia. Holes halfway up sides allow unit to be secured with a chain to help prevent theft. EXL–COAT™ powder coat finishes.

Manufacturer: Ex-Cell Kaiser, Manufacturer Part Number: WR-10R CVR BLKLandscape Series™ 10–gal perforated trash receptacle with lid and retainer bands for liners in Black Gloss. Heavy–gauge Steel with fully welded construction and bottom drainage holes prevent water build–up. Two 1" dia. Holes halfway up sides allow unit to be secured with a chain to help prevent theft. EXL–COAT™ powder coat finishes. ***A $25.00 handling fee will be added to freight for all Ex–Cell Kaiser product orders under $175.00***

Manufacturer: Ex-Cell Kaiser, Manufacturer Part Number: WR-10R COFFEELandscape Series™ 10–gal perforated trash receptacle with retainer bands for liners in Coffee Gloss. Heavy–gauge Steel with fully welded construction and bottom drainage holes prevent water build–up. Two 1" dia. Holes halfway up sides allow unit to be secured with a chain to help prevent theft. EXL–COAT™ powder coat finishes. ***A $25.00 handling fee will be added to freight for all Ex–Cell Kaiser product orders under $175.00***

Manufacturer: Ex-Cell Kaiser, Manufacturer Part Number: WR690 COFFEE PERFLandscape Series™ 10–gal perforated trash receptacle with hinged drop bottom for easy emptying and welded bracket for permanent wall/pole mounting in Coffee Gloss.Heavy–gauge Steel with fully welded construction and bottom drainage holes prevent water build–up. Two 1" dia. Holes halfway up sides allow unit to be secured with a chain to help prevent theft. EXL–COAT™ powder coat finishes.

Manufacturer: Ex-Cell Kaiser, Manufacturer Part Number: WR-10R CVR COFLandscape Series™ 10–gal perforated trash receptacle with lid and retainer bands for liners in Coffee Gloss. Heavy–gauge Steel with fully welded construction and bottom drainage holes prevent water build–up. Two 1" dia. Holes halfway up sides allow unit to be secured with a chain to help prevent theft. EXL–COAT™ powder coat finishes. ***A $25.00 handling fee will be added to freight for all Ex–Cell Kaiser product orders under $175.00***