All

Manufacturer: Vestil, Manufacturer Part Number: HDP-2-42Capacity: 2,000 lbs., Fork Length: 42", Overall Fork Width: 25", Fork Size: 2"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: HDP-4-42Capacity: 4,000 lbs., Fork Length: 42", Overall Fork Width: 25", Fork Size: 4"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: HDP-6-42Capacity: 6,000 lbs., Fork Length: 42", Overall Fork Width: 25", Fork Size: 5"W x 2"H, Bail: 4"W x 7"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-42-5.5Usable Height: 42", Overall Height: 52", Outside Diameter: 5 1/2" – Pour In Place Bollard – Make your bollards permanent by setting them in concrete. The extra length of the Pour in Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with welded anchoring tabs and a removable cap so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility.

Manufacturer: Vestil, Manufacturer Part Number: BOL-R-42-5.5Usable Height 42", Overall Height: 52", Diameter: 5" – Removable Bollard – The Removable Bollard comes with a sleeve that can be set in concrete to hold the bollard. When access is needed into an area that is protected by the bollard, simply lift the bollard out of the sleeve. Replace the bollard in its sleeve to reinstate the protective barrier. Powder coated yellow for high visibility. Sleeve is included.

Manufacturer: Exair, Manufacturer Part Number : 110042SSThe EXAIR 42" 303 Stainless Steel Super Air Knife provides a uniform laminar sheet of airflow for cleaning, cooling, or drying surfaces. Stock, .002" thick polyester shim included.

Manufacturer: Vestil, Manufacturer Part Number: DOL-4242-6TOverall Size (W x L): 42" x 42", Capacity (Pounds): 4,000, Number of Rollers: 6, Style: Tilt – Aluminum Pallet Dollies – Designed to transport pallets with ease. All welded aluminum construction is durable yet lightweight. Features heavy–duty 3" wide x 3" diameter phenolic rollers for easy portability. Tilt style allows for easier turning than non–tilt style. Optional loops/handle and a center support crossbar are available. Dolly height is 4".

Manufacturer: Vestil, Manufacturer Part Number: DOL-4242-8TOverall Size (W x L): 42" x 42", Capacity (Pounds): 6,000, Number of Rollers: 8, Style: Tilt – Aluminum Pallet Dollies – Designed to transport pallets with ease. All welded aluminum construction is durable yet lightweight. Features heavy–duty 3" wide x 3" diameter phenolic rollers for easy portability. Tilt style allows for easier turning than non–tilt style. Optional loops/handle and a center support crossbar are available. Dolly height is 4".

Manufacturer: Vestil, Manufacturer Part Number: DOL-4242-10TOverall Size (W x L): 42" x 42", Capacity (Pounds): 8,000, Number of Rollers: 10, Style: Tilt – Aluminum Pallet Dollies – Designed to transport pallets with ease. All welded aluminum construction is durable yet lightweight. Features heavy–duty 3" wide x 3" diameter phenolic rollers for easy portability. Tilt style allows for easier turning than non–tilt style. Optional loops/handle and a center support crossbar are available. Dolly height is 4".

Manufacturer: Vestil, Manufacturer Part Number: DOL-4242-6NTOverall Size (W x L): 42" x 42", Capacity (Pounds): 4,000, Number of Rollers: 6, Style: Non–Tilt – Aluminum Pallet Dollies – Designed to transport pallets with ease. All welded aluminum construction is durable yet lightweight. Features heavy–duty 3" wide x 3" diameter phenolic rollers for easy portability. Tilt style allows for easier turning than non–tilt style. Optional loops/handle and a center support crossbar are available. Dolly height is 4".

Manufacturer: Vestil, Manufacturer Part Number: AP-4248Capacity (Pounds): 6,000, Overall Size (W x L x H): 42" x 48" x 6", Fork Openings (W x H): 19" x 4 3/8" – Aluminum Pallets – This is the pallet the food and chemical industries have always wanted. Easy to clean with a power washer. Stands up to high–power steam, brushes, or pads. Features a non–skid surface for easy transportation of all products. Durable and re–usable. Heavy–duty welded aluminum construction.

Manufacturer: Vestil, Manufacturer Part Number: PRM-4248Deck Size (W x L): 42" x 48", Capacity: 2000 lbs., Caster Size: 6" x 2", Deck Height: 9–1/4" – Pro–Movers – Transport pallets and skids with these open frame all welded steel dollies. Units roll smoothly on four swivel 6" x 2" mold–on–rubber casters. Durable blue powder coat finish.

Manufacturer: Vestil, Manufacturer Part Number: PRM-4248-8Uniform Static Capacity (pounds): 4,000, Caster Diameter (in.): 8, Caster Width (in.): 2, Caster (quantity): 4, Caster Material: Swivel Glass–Filled Nylon – This Steel Pro–Mover moves pallets without a fork truck or pallet jack. Designed for holding standard wooden pallets. Transport pallets and skids with this open frame all welded steel dolly. Unit rolls smoothly on casters bolted to the dolly. Blue powder coat finish.

Manufacturer: Vestil, Manufacturer Part Number: EM1-200-4250-2Capacity: 2,000 lbs., Usable Size: 42"W x 50"L, Maximum Tilt: 45°, Horizontal Height: 24" – Efficiency Master Tilt Table – Tilt pallets, crates, boxes, or baskets 45° to facilitate easy container loading or unloading. Tables have all welded steel construction for years of durability. Unique design minimizes pinch points to meet OSHA requirements. Units are equipped with an industrial quality, 56 frame 2HP motor. This motor delivers best torque with minimal amperage draw and maximum life. Standard voltage is 208–230/460V 3 phase. A rainproof 24V push button hand control is standard.

Manufacturer: Vestil, Manufacturer Part Number: EM1-200-4250-4Capacity: 4,000 lbs., Usable Size: 42"W x 50"L, Maximum Tilt: 45°, Horizontal Height: 24" – Efficiency Master Tilt Table – Tilt pallets, crates, boxes, or baskets 45° to facilitate easy container loading or unloading. Tables have all welded steel construction for years of durability. Unique design minimizes pinch points to meet OSHA requirements. Units are equipped with an industrial quality, 56 frame 2HP motor. This motor delivers best torque with minimal amperage draw and maximum life. Standard voltage is 208–230/460V 3 phase. A rainproof 24V push button hand control is standard.

Manufacturer: Vestil, Manufacturer Part Number: EM1-200-4250-6Capacity: 6,000 lbs., Usable Size: 42"W x 50"L, Maximum Tilt: 45°, Horizontal Height: 24" – Efficiency Master Tilt Table – Tilt pallets, crates, boxes, or baskets 45° to facilitate easy container loading or unloading. Tables have all welded steel construction for years of durability. Unique design minimizes pinch points to meet OSHA requirements. Units are equipped with an industrial quality, 56 frame 2HP motor. This motor delivers best torque with minimal amperage draw and maximum life. Standard voltage is 208–230/460V 3 phase. A rainproof 24V push button hand control is standard.

Manufacturer: Vestil, Manufacturer Part Number: EM1-500-4250-2Capacity: 2,000 lbs., Usable Size: 42"W x 50"L, Maximum Tilt: 90°, Horizontal Height: 24" – Efficiency Master Tilt Table – These tables feature a full 90° of tilt. Unit is ideal for upending products in shipping and receiving operations. Standard with double acting cylinder for controlled tilt and return. Unit must be lagged to floor. Tables have all welded steel construction for years of durability. Unique design minimizes pinch points to meet OSHA requirements. Units are equipped with an industrial quality, 56 frame 2HP motor. This motor delivers best torque with minimal amperage draw and maximum life. Standard voltage is 208–230/460V 3 phase. A rainproof 24V push button hand control is standard.

Manufacturer: Vestil, Manufacturer Part Number: EM1-500-4250-4Capacity: 4,000 lbs., Usable Size: 42"W x 50"L, Maximum Tilt: 90°, Horizontal Height: 24" – Efficiency Master Tilt Table – These tables feature a full 90° of tilt. Unit is ideal for upending products in shipping and receiving operations. Standard with double acting cylinder for controlled tilt and return. Unit must be lagged to floor. Tables have all welded steel construction for years of durability. Unique design minimizes pinch points to meet OSHA requirements. Units are equipped with an industrial quality, 56 frame 2HP motor. This motor delivers best torque with minimal amperage draw and maximum life. Standard voltage is 208–230/460V 3 phase. A rainproof 24V push button hand control is standard.

Manufacturer: Vestil, Manufacturer Part Number: EM1-500-4250-6Capacity: 6,000 lbs., Usable Size: 42"W x 50"L, Maximum Tilt: 90°, Horizontal Height: 24" – Efficiency Master Tilt Table – These tables feature a full 90° of tilt. Unit is ideal for upending products in shipping and receiving operations. Standard with double acting cylinder for controlled tilt and return. Unit must be lagged to floor. Tables have all welded steel construction for years of durability. Unique design minimizes pinch points to meet OSHA requirements. Units are equipped with an industrial quality, 56 frame 2HP motor. This motor delivers best torque with minimal amperage draw and maximum life. Standard voltage is 208–230/460V 3 phase. A rainproof 24V push button hand control is standard.

Manufacturer: Vestil, Manufacturer Part Number: BOL-RF-42-4.5Outside Diameter (in.): 4–1/2, Mounting Hole (quantity): 4, Mounting Type: Surface – This Steel Pipe Safety Bollard can be used both indoors and outdoors to protect work areas, racking and personnel. Surface mounted steel base plate allows for quick and easy bollard removal. Steel base plate is bolted in place. Guard is easily inserted into base plate then locked in place. Base plate includes pre–drilled mounting holes. Molded rubber caps are removable. Powder coated safety yellow finish. Welded steel construction.

Manufacturer: Vestil, Manufacturer Part Number: BOL-JK-42-4.5Chain Slot (quantity): 4, Bolt Hole (quantity): 4, Top Cap Style: Removable Rubber Cap, Bollard Diameter (in.): 4–1/2, Cap Color : Black, Cap Material: Rubber, Bollard Color: Yellow, Bollard Finish: Powder Coat, Bollard Construction: Steel – Create barriers around workstations, machinery, and outdoor space with Steel Pipe Bollard with Chain Slots. Ideal for indoor and outdoor applications. Easy to assemble. Removable black rubber top cap which exposes chain slots. Place chain into chain slots, storing any excess chain inside the bollard, and place cap back onto bollard. The chain slots hold chain connected to other bollards. Base plate includes pre–drilled bollard. Heavy duty welded steel construction. Powder coat safety yellow finish.

Manufacturer: Vestil, Manufacturer Part Number: BOL-JKS-42-4.5Chain Slot (quantity): 4, Bolt Hole (quantity): 4, Top Cap Style: Removable Bolt on Steel, Bollard Diameter (in.): 4–1/2, Cap Material : Steel, Cap Color: Silver, Bollard Color: Yellow, Bollard Finish: Powder Coat, Bollard Construction: Steel – Create barriers around workstations, machinery, and outdoor space with Steel Pipe Bollard with Chain Slots. Ideal for indoor and outdoor applications. Easy to assemble. Removable bolt–on steel top cap with socket set–screw. Place chain into chain slots, storing any excess chain inside the bollard, and place cap back onto bollard. The chain slots hold chain connected to other bollards. Base plate includes pre–drilled bollard. Heavy duty welded steel construction. Powder coat safety yellow finish.

Manufacturer: Vestil, Manufacturer Part Number: BOL-42-4.5-REDMounting Holes (quantity): 4, Outside Diameter (in.): 4–1/2, Finish: Red Powder Coat, Base Plate Width (in.): 8, Base Plate Diameter (in.) : 8, Base Plate Thickness (in.): 1/4 – A Steel Pipe Safety Bollard can be used both indoors and outdoors to protect work areas, racking and personnel. Molded rubber caps are removable. Base plate includes pre–drilled mounting holes. The unit has a red powder coat finish and a heavy–duty welded steel construction.

Manufacturer: Vestil, Manufacturer Part Number: BOL-RF-42-5.5Outside Diameter (in.): 5–1/2, Mounting Hole (quantity): 4, Mounting Type: Surface – This Steel Pipe Safety Bollard can be used both indoors and outdoors to protect work areas, racking and personnel. Surface mounted steel base plate allows for quick and easy bollard removal. Steel base plate is bolted in place. Guard is easily inserted into base plate then locked in place. Base plate includes pre–drilled mounting holes. Molded rubber caps are removable. Powder coated safety yellow finish. Welded steel construction.