All

Manufacturer: Vestil, Manufacturer Part Number: FAL-3610-50Overall Width: 36", Overall Length: 10', Capacity: 5,000 lbs., Maximum Working Height: 30" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Vestil, Manufacturer Part Number: FWR-3610-50Overall Width: 36", Overall Length: 10', Capacity: 3,000 lbs., Maximum Working Height: 30" – Fiberglass Walk Ramp – Load and unload equipment from trucks using these Heavy–duty Fiberglass Walk Ramps. Reinforced fiberglass construction provides up to 3,000 pounds capacity. Abrasive surface provides good traction in wet or dry conditions. 1" high curb on each side of ramp. Not for use with fork trucks or pallet trucks.

Manufacturer: Vestil, Manufacturer Part Number: FAL-3612-50Overall Width: 36", Overall Length: 12', Capacity: 5,000 lbs., Maximum Working Height: 35" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Vestil, Manufacturer Part Number: FWR-3612-50Overall Width: 36", Overall Length: 12', Capacity: 3,000 lbs., Maximum Working Height: 35" – Fiberglass Walk Ramp – Load and unload equipment from trucks using these Heavy–duty Fiberglass Walk Ramps. Reinforced fiberglass construction provides up to 3,000 pounds capacity. Abrasive surface provides good traction in wet or dry conditions. 1" high curb on each side of ramp. Not for use with fork trucks or pallet trucks.

Manufacturer: Pucel, Manufacturer Part Number: 36120Each set consists of two side stops and one back stop. Constructed of 12 gauge steel.

Manufacturer: Vestil, Manufacturer Part Number: FAL-3614-50Overall Width: 36", Overall Length: 14', Capacity: 5,000 lbs., Maximum Working Height: 35" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Vestil, Manufacturer Part Number: FWR-3614-50Overall Width: 36", Overall Length: 14', Capacity: 3,000 lbs., Maximum Working Height: 45" – Fiberglass Walk Ramp – Load and unload equipment from trucks using these Heavy–duty Fiberglass Walk Ramps. Reinforced fiberglass construction provides up to 3,000 pounds capacity. Abrasive surface provides good traction in wet or dry conditions. 1" high curb on each side of ramp. Not for use with fork trucks or pallet trucks.

Manufacturer: Pucel, Manufacturer Part Number: 36144Each set consists of two side stops and one back stop. Constructed of 12 gauge steel.

Manufacturer: Vestil, Manufacturer Part Number: FAL-3616-50Overall Width: 36", Overall Length: 16', Capacity: 5,000 lbs., Maximum Working Height: 50" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Vestil, Manufacturer Part Number: ASP-36-AUniform Capacity (lbs.): 500, Individual Step Depth (in.): 12, Top Step Height from bottom Step Fixed (in.): 7, First Step Adjustment Minimum (in.): 6, First Step Adjustment Maximum (in.): 7–1/2, Second Step Adjustment Minimum (in.): 13, Second Step Adjustment Maximum (in.): 14–1/2, Construction: Aluminum – The Adjustable Step–Mate Stand can be used as either a comfortable worker platform or a semi–permanent step. The serrated surface ensures safe footing. The legs adjust individually by screwing them into or out of the leg base. The unit has a welded construction

Manufacturer: Vestil, Manufacturer Part Number: EH-3624Capacity: 6,200 lbs., Plate Thickness: ", Width: 36", Length: 24", Height Differential: 3" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: A-3624Capacity: 500 lbs, Width: 36", Length: 24", Height Diff: 3" – Aluminum Hand Truck Dockplates – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: AH-3624Capacity: 700 lbs., Dimensions: 36"W x 24"L x 3"H, Plate Thickness: 5/16" – Aluminum Hand Truck Dockplate – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: ASP-36-SSUniform Capacity (lbs.): 500, Individual Step Depth (in.): 12, Top Step Height from bottom Step Fixed (in.): 7, First Step Adjustment Minimum (in.): 6, First Step Adjustment Maximum (in.): 7–1/2, Second Step Adjustment Minimum (in.): 13, Second Step Adjustment Maximum (in.): 14–1/2, Construction: Stainless Steel – The Adjustable Step–Mate Stand can be used as either a comfortable worker platform or a semi–permanent step. The serrated surface ensures safe footing. The legs adjust individually by screwing them into or out of the leg base. The unit has a welded construction

Manufacturer: Vestil, Manufacturer Part Number: HPRO-RF-36-24-4Guard Diameter (in.): 4–1/2, Base Plate Width (in.): 8, Base Plate Length (in.): 8, Construction: Steel, Finish: Powder Coat Yellow, Bolt Holes (quantity): 8 – The surface–mounted steel base plates allow for quick and easy removal of this High Profile Machinery Guard. May be used either indoors or outdoors. Steel base plates are bolted in place. Guard is easily inserted into base plates then locked into place. Base plate includes four (4) pre–drilled mounting holes. Welded steel construction with yellow powder coat finish.

Manufacturer: Vestil, Manufacturer Part Number: EH-3630Capacity: 5,100 lbs., Plate Thickness: ", Width: 36", Length: 30", Height Differential: 4" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-3630Capacity: 3,000 lbs., Width: 36", Length: 30", Height Difference: 4", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: A-3630Capacity: 500 lbs, Width: 36", Length: 30", Height Diff: 4" – Aluminum Hand Truck Dockplates – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: AH-3630Capacity: 700 lbs., Dimensions: 36"W x 30"L x 4"H, Plate Thickness: 5/16" – Aluminum Hand Truck Dockplate – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: ASP-36-3Overall Size: 36"W x 36"D, First Step: 6" to 10", Second Step: 13" to 17", Third Step: 20" to 24" – Adjustable–Height Step Stand – Our Step–Mate Stands can be used as either a comfortable worker platform or a semi–permanent step. Individual step size is 12" deep. Top step is fixed 7" higher than bottom step. Serrated steel surface ensures safe footing. Legs adjust individually by screwing them into or out of the leg base. Powder coated safety yellow finish. Welded steel construction. Capacity 500 pounds.

Manufacturer: Vestil, Manufacturer Part Number: ASP-36-3-AUniform Capacity (lbs.): 500, Individual Step Depth (in.): 12, Top Step Height from bottom Step Fixed (in.): 7, First Step Adjustment Minimum (in.): 6, First Step Adjustment Maximum (in.): 7–1/2, Second Step Adjustment Minimum (in.): 13, Second Step Adjustment Maximum (in.): 14–1/2, Third Step Adjustment Minimum (in.): 20, Third Step Adjustment Maximum (in.): 21–1/2, Construction: Aluminum – The Adjustable Step–Mate Stand can be used as either a comfortable worker platform or a semi–permanent step. The serrated surface ensures safe footing. The legs adjust individually by screwing them into or out of the leg base. The unit has a welded construction

Manufacturer: Vestil, Manufacturer Part Number: EH-3636Capacity: 4,300 lbs., Plate Thickness: ", Width: 36", Length: 36", Height Differential: 5" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: A-3636Capacity: 500 lbs, Width: 36", Length: 36", Height Diff: 5" – Aluminum Hand Truck Dockplates – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: AH-3636Capacity: 700 lbs., Dimensions: 36"W x 36"L x 5"H, Plate Thickness: 5/16" – Aluminum Hand Truck Dockplate – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.