All

Manufacturer: Justrite, Manufacturer Part Number: 29940This is a CHEMCOR SHELF – 36".

Manufacturer: Vestil, Manufacturer Part Number: HDP-CLRod Length: 36", Rod Diameter: 2–3/4", Overall Width: 21", Capacity: 1500 lbs. – Coil Lifter – The hoist mounted Coil Lifter has adjustable balance points to accommodate different sized coils. Coils can be up to 90" in diameter and weigh as much as 1,500 pounds. The top adjusting bail allows the operator to insure level transportation of load. Coil lifer is compact for easy storage. Steel construction. Painted finish. Lifting ring and hoist sold separately.

Manufacturer: Vikan, (Formerly Remco) Manufacturer Part Number: 6036Available in a variety of stock lengths, these hazmat handles are an essential element of Remco's low–cost, total solution to chemical clean–up tasks. Stiff but lightweight, they feature honeycomb construction with smooth, chemically resistant gel–coat surfaces.

Manufacturer: Vestil, Manufacturer Part Number: HDP-2-36Capacity: 2,000 lbs., Fork Length: 36", Overall Fork Width: 25", Fork Size: 2"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: HDP-4-36Capacity: 4,000 lbs., Fork Length: 36", Overall Fork Width: 25", Fork Size: 3"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Pucel, Manufacturer Part Number: P-36Pigeon hole unit is 9"D x 36"W x 7"H with three 4" X 12" openings.

Manufacturer: Pucel, Manufacturer Part Number: P-66Pigeon hole unit is 9"D x 36"W x 11"H with six 4" X 12" openings.

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-36-5.5Usable Height: 36", Overall Height: 46", Outside Diameter: 5 1/2" – Pour In Place Bollard – Make your bollards permanent by setting them in concrete. The extra length of the Pour in Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with welded anchoring tabs and a removable cap so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility.

Manufacturer: Vestil, Manufacturer Part Number: BOL-R-36-5.5Usable Height 36", Overall Height: 46", Diameter: 5" – Removable Bollard – The Removable Bollard comes with a sleeve that can be set in concrete to hold the bollard. When access is needed into an area that is protected by the bollard, simply lift the bollard out of the sleeve. Replace the bollard in its sleeve to reinstate the protective barrier. Powder coated yellow for high visibility. Sleeve is included.

Manufacturer: Exair, Manufacturer Part Number : 110036SSThe EXAIR 36" 303 Stainless Steel Super Air Knife provides a uniform laminar sheet of airflow for cleaning, cooling, or drying surfaces. Stock, .002" thick polyester shim included.

Manufacturer: Exair, Manufacturer Part Number : 9236For applications where frequent repositioning of the standard force Air Nozzles or Jet is required, Flexible Stay Set Hoses™ are ideal. Simply mount the hose in close proximity to the application and bend it to aim the airstream at the target. The Stay Set Hose has "memory" and will not creep or bend.

Manufacturer: Exair, Manufacturer Part Number : 9286For applications where frequent repositioning of the standard force Air Nozzles or Jet is required, Flexible Stay Set Hoses™ are ideal. Simply mount the hose in close proximity to the application and bend it to aim the airstream at the target. The Stay Set Hose has "memory" and will not creep or bend.

Manufacturer: Wesco, Manufacturer Part Number: 480005Model #: BC2638. HMH–36–1 STEERING HANDLE. Steel Construction. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 480007Model #: BC2639. HMH–36–2 STEERING HANDLE. Steel Construction. For 480002,480003,480004. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 480009Model #: HMH–TB–2. HMH–TB–2 TURNING BAR. Steel Construction. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Vestil, Manufacturer Part Number: FAL-3610-50Overall Width: 36", Overall Length: 10', Capacity: 5,000 lbs., Maximum Working Height: 30" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Vestil, Manufacturer Part Number: FWR-3610-50Overall Width: 36", Overall Length: 10', Capacity: 3,000 lbs., Maximum Working Height: 30" – Fiberglass Walk Ramp – Load and unload equipment from trucks using these Heavy–duty Fiberglass Walk Ramps. Reinforced fiberglass construction provides up to 3,000 pounds capacity. Abrasive surface provides good traction in wet or dry conditions. 1" high curb on each side of ramp. Not for use with fork trucks or pallet trucks.

Manufacturer: Vestil, Manufacturer Part Number: FAL-3612-50Overall Width: 36", Overall Length: 12', Capacity: 5,000 lbs., Maximum Working Height: 35" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Vestil, Manufacturer Part Number: FWR-3612-50Overall Width: 36", Overall Length: 12', Capacity: 3,000 lbs., Maximum Working Height: 35" – Fiberglass Walk Ramp – Load and unload equipment from trucks using these Heavy–duty Fiberglass Walk Ramps. Reinforced fiberglass construction provides up to 3,000 pounds capacity. Abrasive surface provides good traction in wet or dry conditions. 1" high curb on each side of ramp. Not for use with fork trucks or pallet trucks.

Manufacturer: Pucel, Manufacturer Part Number: 36120Each set consists of two side stops and one back stop. Constructed of 12 gauge steel.

Manufacturer: Vestil, Manufacturer Part Number: FAL-3614-50Overall Width: 36", Overall Length: 14', Capacity: 5,000 lbs., Maximum Working Height: 35" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Vestil, Manufacturer Part Number: FWR-3614-50Overall Width: 36", Overall Length: 14', Capacity: 3,000 lbs., Maximum Working Height: 45" – Fiberglass Walk Ramp – Load and unload equipment from trucks using these Heavy–duty Fiberglass Walk Ramps. Reinforced fiberglass construction provides up to 3,000 pounds capacity. Abrasive surface provides good traction in wet or dry conditions. 1" high curb on each side of ramp. Not for use with fork trucks or pallet trucks.

Manufacturer: Pucel, Manufacturer Part Number: 36144Each set consists of two side stops and one back stop. Constructed of 12 gauge steel.

Manufacturer: Vestil, Manufacturer Part Number: FAL-3616-50Overall Width: 36", Overall Length: 16', Capacity: 5,000 lbs., Maximum Working Height: 50" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.