All

Manufacturer: Vestil, Manufacturer Part Number: CYL-M-7Lifting Aid Handles Cylinder Diameter (in.): 7, Construction: Steel, Finish: Powder Coat Yellow, Folded Degree : 105, Maximum Cylinder Diameter (in.): 7 – This Manual Cylinder Lifter is easy to use and allows for safely lifting cylinders. The pivoting design grabs and squeezes the cylinder when lifted. The cylinder lifting device has a rubber–coated center and handle holes. Steel construction with a powder–coat yellow finish.

Manufacturer: Enpac, Manufacturer Part Number : ENP-PG742PetroGuard® is a super absorbent polymer that works instantly and is designed to solidify liquids into non-leaching solids. This absorbent has the ability to absorb hydrocarbons and petroleum products and is known for its 4:1 absorption capacity. It has the ability to product a low-volumetric barrier that immobilizes oil on land or water. Mini Booms are used for a wide range of organic liquids for applications such as drip pans, leaking equipment, spill pallet sumps, and smaller spills in water. Key features: -Absorbs hydrocarbons faster than competing polymers -Higher absorption ratio by weight than others -Encapsulates hydrocarbons – will not release or “leach” -Permanently buoyant -Cost effective -Labor saving -Will not dissolve in water -Non-toxic -Easily collected and disposed of by incineration or landfill -Readily capable of being skimmed from the surface of water -Flammable vapors are dramatically reduced or eliminated

Manufacturer: Enpac, Manufacturer Part Number : ENP-PG77PetroGuard® is a super absorbent polymer that works instantly and is designed to solidify liquids into non-leaching solids. This absorbent has the ability to absorb hydrocarbons and petroleum products and is known for its 4:1 absorption capacity. It has the ability to product a low-volumetric barrier that immobilizes oil on land or water. The packets are best used for small, incidental leaks or spills, such as removing oil sheens from sumps or drip pans. Key features: -Absorbs hydrocarbons faster than competing polymers -Higher absorption ratio by weight than others -Encapsulates hydrocarbons – will not release or “leach” -Permanently buoyant -Cost effective -Labor saving -Will not dissolve in water -Non-toxic -Easily collected and disposed of by incineration or landfill -Readily capable of being skimmed from the surface of water -Flammable vapors are dramatically reduced or eliminated

Manufacturer: Vestil, Manufacturer Part Number: BPC-7Height: 52", Outside Diameter: 7 1/8", Inside Diameter: 7" – Bollard/Post Covers – This durable poly sleeve will minimize maintenance and improve appearance. Covers are 1/8" thick. Units slide over existing bollards. No hardware needed.

Manufacturer: Vestil, Manufacturer Part Number: D-TR-72Capacity: 550 lbs., Dimensions: 7–7/8"W x 72"L – Telescopic Wheel Chair Ramp – The telescopic ramp is constructed of lightweight aluminum extrusion. The top surface is serrated for positive traction. Sold as a pair. The Americans with Disabilities Act requires that all buildings must be accessible to disabled persons. Failure to comply may result in monetary damages and civil penalties. According to ADA rules and regulations, for every inch of rise you must have a foot of ramp in length.

This mobile machine table is engineered for exceptional durability and effortless movement in tough industrial settings. With a robust load capacity of 3,600 lbs and a heavy-duty design, it provides a secure platform for precision work and efficient material handling. Perfect for workshops and production floors, this table is ready for immediate use with no assembly required.Key Features Heavy-Duty Load Capacity: Supports up to 3,600 lbs, ensuring reliable performance for rigorous tasks. Superior Mobility: Outfitted with four swivel 6″ x 2″ phenolic casters and integrated wheel brakes, delivering smooth maneuverability while staying stable when stationary. Robust Construction: Features a 3/16″ thick steel top supported by 2″ x 2″ x 1/4″ structural angle iron, all fully welded to ensure long-lasting durability. Time-Saving Design: Factory-built with no assembly required, allowing for immediate deployment and enhanced worksite efficiency. Trusted Manufacturer: Designed by Little Giant (Part Number: MTH2830-6PHBK30) and engineered to meet stringent industrial demands. Technical Specifications Load Capacity: 3,600 lbs Top Material: 3/16″ thick steel Leg Material: 2″ x 2″ x 1/4″ structural angle iron Casters: Four 6″ x 2″ swivel phenolic casters with integrated wheel brakes Construction: Fully welded for enhanced strength and stability Discover more heavy-duty solutions in our Little Giant collection and explore our range of Machine Tables designed to enhance your workspace.

Manufacturer: Vikan, Manufacturer Part Number: 581518The Vikan 7-Liter Utility Box neatly fits into HyGo's top basket and can hold cloths, disinfecting wipes, gloves, and more

Manufacturer: Vestil, Manufacturer Part Number: VSSG-475Usable Width (Feet): 3 to 4, Collapsed Height (Feet): 7 1/2, In Use Height (Feet): 7 – Galvanized Folding Gate – Secure outside access during the day and add security at night with heavy–duty 15 gauge steel folding gates. Durable 3" rubber casters allow operator to quickly and fully retract gate when not in use. Center drop pin rests in pre–drilled hole to secure gate when extended. Easy installation! Lock is located on right side on single gates. Galvanized for durability. Constructed of steel U–channels riveted back to back using aircraft quality rivets and heavy–duty 1–1/2" x 1–1/2" vertical angles. Installation hardware included. Contact factory for additional sizes.

Manufacturer: Vestil, Manufacturer Part Number: VSSG-875Usable Width (Feet): 7 to 8, Collapsed Height (Feet): 7 1/2, In Use Height (Feet): 7 – Galvanized Folding Gate – Secure outside access during the day and add security at night with heavy–duty 15 gauge steel folding gates. Durable 3" rubber casters allow operator to quickly and fully retract gate when not in use. Center drop pin rests in pre–drilled hole to secure gate when extended. Easy installation! Lock is located on right side on single gates. Galvanized for durability. Constructed of steel U–channels riveted back to back using aircraft quality rivets and heavy–duty 1–1/2" x 1–1/2" vertical angles. Installation hardware included. Contact factory for additional sizes.

Manufacturer: Durham, Manufacturer Part Number: 522-4316" wide, metal, empty, first aid kit, holds 60 packages, 1 fixed shelf, color: white Mfg Part#: 522-43

Discover a robust and efficient solution with our 70° yellow self-dump hopper. Ideal for heavy-duty industrial applications, this unit is engineered to enhance safety and boost operational efficiency. Its innovative design enables automatic dumping when the bumper contacts the side of a dumpster, ensuring secure and dependable performance every time.Technical Specifications• Manufacturer & Part Number: Vestil – D-25-HD-YEL• Capacity & Volume: 6,000 lb and 1/4 cubic yard• Construction Details: 8-gauge steel with a durable Powder Coat Yellow finish• Fork Pocket Dimensions: Center 18 in., Width 7½ in., Height 2½ in.• Chute Dimensions: Width 20 in., Length 41¼ in., Height 27⅞ in.Features & Benefits• Self-Dumping Mechanism: Automatically operates at a precise 70° angle for streamlined dumping processes.• Safety Restraint: Secures the hopper to the forklift for enhanced stability during operation.• Manual Dump Option: Offers an accessible cable option that allows for manual control from the forklift seat.• Heavy-Duty Construction: Built for durability and ease of maintenance in demanding industrial environments.Engineered for precision and safety, this heavy-duty self-dumping steel hopper is the perfect solution for efficient material handling. Explore additional industrial solutions in our Material Handling collection or view our complete range of Self-Dumping Hoppers for more options.

Manufacturer: Zing, Manufacturer Part Number: 7129-USA ZING 7129-USA Lockout Tool Box provides a variety of lockout devices for on-the-job maintenance and repair operations. The tool box is made from durable, 100% recycled plastic, with open room to accommodate extra tools. Most of the devices are UL Validated for recycled content, and support sustainability initiatives and LEED credits. The tool box measures 13"W x 6.5"H x 5"D and includes 32 components. The tool box and all components are Made in the USA. Kit contents include: ¥Qty. 3 Padlocks ( Part # 900KD-red), 1.5" shackle, keyed different with 1 key per padlock, color red, assembled in the USA. ¥Qty. 3 Breaker Lockouts ( Part # 7110), fits single, double and triple pole switches .3" - .6" high, .35" - .44" depth with or without a hole, accommodates 1 padlock with shackle diameter up to 9/32" ¥Qty. 1 Small Plug Lockout (Part # 7105), universal fit closure accepting up to 1/2" dia. cord and 2"W x 3"L plugs, accommodates up to 3 padlocks with shackle diameter up to 9/16" ¥Qty. 1 Large Plug Lockout (7100), universal fit closure accepting up to 1-1/4" dia. cord and 3"W x 5-1/2"L plugs, accommodates up to 3 padlocks with shackle diameter up to 9/16" ¥Qty. 1 Small Valve Lockout (7103), fits 1" - 2.5" valves, accommodates up to 3 padlocks with shackle diameter up to 3/8" ¥Qty. 3 Large Steel Hasps (7107), 1-1/2" closed hole, accommodates up to 6 padlocks with shackle diameter up to 3/8" dia. ¥Qty. 10 Lockout Tags (7010) with legend, " DO NOT OPERATE." 50 lb. pull strength exceeds OSHA's requirement. ¥Qty. 10 Cable Ties

Manufacturer: Zing, Manufacturer Part Number: 7137 This lockout kit is designed to help you achieve electrical lockout compliance with an easily portable kit. The lockout kit can also be wall-mounted. Kit contents include: (1) #7136E Portable or Wall-mountable Lockout Case, Plastic. (1) #7619 1" Lockout Hasp (1) #7620 1.5" Lockout Hasp (1) #7256 Circuit Breaker Lockout 120/277 V (1) #7257 Circuit Breaker Lockout 480/600 V (1) #7258 Oversize Circuit Breaker Lockout (5) Do Not Operate Lockout Tags, Red Stripe (also available as a 10-pack, see part # 7343) (5) #7130 Cable Ties (2) #7030 Padlocks, Keyed Different (1) # 7105 Small Plug Lockout Device (1) # 6071 Lockout Training Overview Booklet

Manufacturer: Zing, Manufacturer Part Number: 7138 This portable lockout kit is designed to keep you covered in many common lockout applications, featuring breaker, plug, valve, pneumatic, and cable lockout devices. The lockout bag is both durable and portable. Lockout kit contents include: Description Qty 7340 Tool Bag - Small 1 7620 1.5 In Hasp 1 7619 1 In Hasp 1 7256 Clamp On Breaker Lockout - Single 1 7257 Clamp On Breaker Lockout - Double 1 7258 Clamp On Breaker Lockout - Oversized 1 7343 Do Not Operate Lockout Tags - Red Stripe 5 7130 Cable Ties 5 700KD-RED Padlocks - KD 2 7614 Universal Wall Switch Lockout 1 7249 Ball Valve Lockout, 3/8 - 1.4 In Dia 1 7103 Gate Valve Lockout 1 in.-2.5 in 1 7104 Gate Valve Lockout 2.5 in.-5 in 1 7632 Pneumatic Lockout 1 7244 Cable Lockout 1 7253 Push Button Lockout 1 7100 Large Plug Lockout 1 7105 Small Plug Lockout 1

Manufacturer: Zing, Manufacturer Part Number: 7141 This kit is designed to give operators convenient, portable access to some of the most commonly needed lockout devices. Kit contents include: Part # Qty 7136E Plastic Case - White, Wall Mountable 1 7620 1.5" Hasp 1 7256 Clamp On Breaker Lockout 1 7343 Do Not Operate Lockout Tags - Red Stripe 2 7130 Cable Ties 2 700KD-RED Padlocks - KD 1

Manufacturer: Zing, Manufacturer Part Number: 7154-USA The 7154-USA lockout kit is designed to help you achieve electrical lockout compliance with an easily portable kit. The lockout kit can also be wall-mounted. The case and all components are Made in the USA. Qty. 2: 900KD-RED Padlock, KD 1.5" Red Qty 10: 7510E Lockout Tags Qty. 1: 7110S Circuit Breaker Lockout-Single Qty. 1: 7111S Circuit Breaker Lockout-Double Qty. 1: 7103 Gate Valve Lockout 1-2.5" Qty. 1: 7106 Hasp, Steel 1" Qty. 1: 7107 Hasp, Steel 1.5" Qty. 1: 6064 Wall Switch Lockout Qty. 1: 7105 Plug Lockout - Small Qty. 10: 7130 Cable Ties

Manufacturer: Zing, Manufacturer Part Number: 7155-USA The 7155-USA Personal Lockout Kit is designed to help you achieve electrical lockout compliance with an easily portable kit. The lockout kit can also be wall-mounted and has room to add more components. The case and all components are Made in the USA. Qty. 2: 900KD-RED Padlock, KD 1.5" Red Qty 5: 7510E Lockout Tags Qty. 1: 7110S Circuit Breaker Lockout-Single Qty. 1: 7111S Circuit Breaker Lockout-Double Qty. 1: 7106 Hasp, Steel 1" Qty. 1: 7107 Hasp, Steel 1.5" Qty. 5: 7130 Cable Ties

Manufacturer: Zing, Manufacturer Part Number: 7156-USA ZING 7156-USA Lockout Tool Box provides a variety of lockout devices for on-the-job maintenance and repair operations. The tool box is made from durable, 100% recycled plastic, with open room to accommodate extra tools. Most of the devices are UL Validated for recycled content, and support sustainability initiatives and LEED credits. The tool box measures 13"W x 6.5"H x 5"D and includes 33 components. The tool box and all components are Made in the USA. Kit contents include: Qty. 3 Padlocks ( Part # 900KD-red), 1.5" shackle, keyed different with 1 key per padlock, color red, assembled in the USA. Qty. 3 Breaker Lockouts ( Part # 7110), fits single, double and triple pole switches .3" - .6" high, .35" - .44" depth with or without a hole, accommodates 1 padlock with shackle diameter up to 9/32" Qty. 1 Breaker Lockouts ( Part # 7111), fits double and triple pole switches .3" - .6 " high, .35" - .44" deep, with or without a hole, and will accommodate 1 padlock with shackles up to a 9/32" diameter. Qty. 1 Wall Switch Lockout, fits standard toggle style wall switches Qty. 1 Small Plug Lockout (Part # 7105), universal fit closure accepting up to 1/2" dia. cord and 2"W x 3"L plugs, accommodates up to 3 padlocks with shackle diameter up to 9/16" Qty. 1 Large Plug Lockout (7100), universal fit closure accepting up to 1-1/4" dia. cord and 3"W x 5-1/2"L plugs, accommodates up to 3 padlocks with shackle diameter up to 9/16" Qty. 3 Large Steel Hasps (7107), 1-1/2" closed hole, accommodates up to 6 padlocks with shackle diameter up to 3/8" dia. Qty. 10 Lockout Tags (7010) with legend, " DO NOT OPERATE." 50 lb. pull strength exceeds OSHA's requirement. Qty. 10 Cable Ties

Manufacturer: Zing, Manufacturer Part Number: 7158-USA The 7158-USA Lockout Kit is designed to help you achieve electrical lockout compliance with an easily portable kit. The lockout kit can carried or belt mounted. The pouch and all components are Made in the USA. Qty. 1: 900KD-RED Padlock, KD 1.5" Red Qty 2: 7510E Lockout Tags Qty. 2: 7110S Circuit Breaker Lockout-Single Qty. 2: 7111S Circuit Breaker Lockout-Double Qty. 1: 7106 Hasp, Steel 1" Qty. 1: 7107 Hasp, Steel 1.5" Qty. 1: 7105 Plug Lockout - Small Qty. 2: 7130 Cable Ties

Manufacturer: Durham, Manufacturer Part Number: 363-9512" deep, steel, 72 opening bin, for small part storage, color: gray Mfg Part#: 363-95

This durable storage cabinet, known as the 72 D UNIT #95 GRAY, is engineered for busy industrial and commercial environments. Manufactured by Durham (refer to the Durham collection at Durham Products), this unit provides a dependable solution for organizing small parts while offering a sleek, industrial aesthetic.Key Features Robust Construction: Crafted from heavy-duty, cold-rolled steel with a powder-coated gloss gray finish, the Durham 019-95 model is built to endure rigorous industrial use. Optimized Storage: Featuring 72 drawers, each compartment is thoughtfully designed to improve organization for small parts. While the overall cabinet depth is 12.25", the dimensions of each drawer are optimized for easy access and efficiency. Design & Performance: The deep construction offers ample space for components and tools, ensuring that everything stays in its proper place. This makes it a practical addition to maintenance workshops, manufacturing floors, and material handling facilities. Benefits and ApplicationsThis cabinet not only maximizes storage efficiency but also contributes to a safer, clutter-free work environment. Its precise design and durable construction mean you can rely on it day after day. Whether you’re interested in purchasing the 72 D UNIT #95 GRAY for industrial settings or ordering one for your workshop, this model is a smart investment in long-lasting, organized storage. It is an essential asset for any facility aiming for optimal performance and safety.Invest now to purchase the 72 D UNIT #95 GRAY and upgrade your material handling solutions. For additional options, explore our collection of Steel Drawer Units.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-72Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 72" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-72-PAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 72", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Morse, Manufacturer Part Number: 410Lift, move, rotate and pour up to 1200 Lb. drum up to 72" high with the Morse Stainless Steel Hydra–Lift Karrier with hand pump drum lift, and pull chain drum tilt control. Options to handle 55–gallon plastic drum, a fiber drum, or a smaller drum. 29 x 29 x 36.35. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.