All

Manufacturer: Vestil, Manufacturer Part Number: SLG-6The Safety Lift Gate can be lifted out of the way with a single finger. Simply lift and the self folding action folds the gate in a vertical position. With the assistance of the air assist cylinder the gate can be lifted with the slightest effort. The Lift Gate is manufactured of steel tubing with a corrosion resistant coating. The unique design can be either wall or floor mounted. Ideal on loading dock doors to help reduce the possibility of people falling. Unit folds up completely. MFG Part# SLG-6

Manufacturer: Vestil, Manufacturer Part Number: SLG-8The Safety Lift Gate can be lifted out of the way with a single finger. Simply lift and the self folding action folds the gate in a vertical position. With the assistance of the air assist cylinder the gate can be lifted with the slightest effort. The Lift Gate is manufactured of steel tubing with a corrosion resistant coating. The unique design can be either wall or floor mounted. Ideal on loading dock doors to help reduce the possibility of people falling. Unit folds up completely. MFG Part# SLG-6

Manufacturer: Checkers, Manufacturer Part Number : GNRS3501BL Product Summary -Made with corrosion resistant recycled rubber for long lasting durability and dependability -Built to withstand abuse from ultraviolet light and precipitation including ice, road salt, gas and oil and does not change with extreme weather swings -The modular interlocking tongue and groove system, creates a uniform surface fit any road width's -High-impact, high traction recycled rubber won't break, chip, crack, or fade -Molded reflective tape on the mid-sections provide optimal visibility, even on a dark night and in bad weather, alerting drivers well in advance -Long lasting and cost efficient -End caps to provide a smooth finish to the ends of the hump and for protecting section ends from wear and tear -Emergency-vehicle friendly. Heavy load bearing. Tensile strength minimum of 500 psi -Warranty: 3 years on the product; 1 year on the tape (under normal use)

Manufacturer: Checkers, Manufacturer Part Number : GNRS3502BL Product Summary -Made with corrosion resistant recycled rubber for long lasting durability and dependability -Built to withstand abuse from ultraviolet light and precipitation including ice, road salt, gas and oil and does not change with extreme weather swings -The modular interlocking tongue and groove system, creates a uniform surface fit any road width's -High-impact, high traction recycled rubber won't break, chip, crack, or fade -Molded reflective tape on the mid-sections provide optimal visibility, even on a dark night and in bad weather, alerting drivers well in advance -Long lasting and cost efficient -End caps to provide a smooth finish to the ends of the hump and for protecting section ends from wear and tear -Emergency-vehicle friendly. Heavy load bearing. Tensile strength minimum of 500 psi -Warranty: 3 years on the product; 1 year on the tape (under normal use)

Manufacturer: Checkers, Manufacturer Part Number : GNRS3500YB Product Summary -Made with corrosion resistant recycled rubber for long lasting durability and dependability -Built to withstand abuse from ultraviolet light and precipitation including ice, road salt, gas and oil and does not change with extreme weather swings -The modular interlocking tongue and groove system, creates a uniform surface fit any road width's -High-impact, high traction recycled rubber won't break, chip, crack, or fade -Molded reflective tape on the mid-sections provide optimal visibility, even on a dark night and in bad weather, alerting drivers well in advance -Long lasting and cost efficient -End caps are available to provide a smooth finish to the ends of the hump and for protecting section ends from wear and tear -Emergency-vehicle friendly. Heavy load bearing. Tensile strength minimum of 500 psi -Warranty: 3 years on the product; 1 year on the tape (under normal use)

Manufacturer: Vikan, (Formerly Remco) Manufacturer Part Number: 6896SS44" D-Grip (Med Blade, Ext D)

Manufacturer: Vikan, (Formerly Remco) Manufacturer Part Number: 6985SS46" D-Grip (Lrg Blade, Ext D)

Manufacturer: Vikan, (Formerly Remco) Manufacturer Part Number: 6898SS33" D-Grip (Med Blade, Short D)

Manufacturer: Vikan, (Formerly Remco) Manufacturer Part Number: 6897SS35" D-Grip (Lrg Blade, Short D)

Manufacturer: Vikan, (Formerly Remco) Manufacturer Part Number: 6892SS39" D-Grip (Med Blade, Std D)

Manufacturer: Vikan, (Formerly Remco) Manufacturer Part Number: 6900SS

Manufacturer: Bradley, Manufacturer Part Number: S19314ACCombination Drench Shower w/ Halo Eye / Facewash, Plastic Shower Head And 304 Stainless Steel Bowl, Galvanized Steel Pipe w/Yellow Polyurethane Paint, 1–1/4in. NPT Water Supply, Shower Exceeds Minimum 20 GPM Flow, Integral Flow Control included, UL Recognized To ANSI Z358.1–2009, Hand and Foot Operation

Manufacturer: Bradley, Manufacturer Part Number: S19314BFCombination Drench Shower w/ Halo Eye/Facewash, Plastic Shower Head And 304 Stainless Steel Bowl, Galvanized Steel Pipe w/Yellow Polyurethane Paint, 1–1/4in. NPT Water Supply, Shower Exceeds Minimum 20 GPM Flow, Integral Flow Control included, UL Recognized To ANSI Z358.1–2009, Barrier Free

Manufacturer: Bradley, Manufacturer Part Number: S19314EWCombination Drench Shower w/ Halo Eyewash, Plastic Shower Head And Plastic Bowl, Galvanized Steel Pipe w/Yellow Polyurethane Paint, 1–1/4in. NPT Water Supply, Shower Exceeds Minimum 20 GPM Flow, Integral Flow Control included, UL Recognized To ANSI Z358.1–2009,

Manufacturer: Bradley, Manufacturer Part Number: S19314PDCCombination Drench Shower w/ Halo Eyewash, Plastic Shower Head And Plastic Bowl with Plastic Cover, Galvanized Steel Pipe w/Yellow Polyurethane Paint, 1–1/4in. NPT Water Supply, Shower Exceeds Minimum 20 GPM Flow, Integral Flow Control included, UL Recognized To ANSI Z358.1–2009,

Manufacturer: Bradley, Manufacturer Part Number: S19314PDCFWCombination Drench Shower w/ Halo Eye/Face Wash, Plastic Shower Head And Plastic Bowl with Cover, Galvanized Steel Pipe w/Yellow Polyurethane Paint, 1–1/4in. NPT Water Supply, Shower Exceeds Minimum 20 GPM Flow, Integral Flow Control included, UL Recognized To ANSI Z358.1–2009,

Manufacturer: Bradley, Manufacturer Part Number: S19314SBCombination Drench Shower w/ Halo Eyewash, Plastic Shower Head And 304 Stainless Steel Bowl, Galvanized Steel Pipe w/Yellow Polyurethane Paint, 1–1/4in. NPT Water Supply, Shower Exceeds Minimum 20 GPM Flow, Integral Flow Control included, UL Recognized To ANSI Z358.1–2009,

Manufacturer: Bradley, Manufacturer Part Number: S19314SBFWCombination Drench Shower w/ Halo Eye / Facewash, Plastic Shower Head And 304 Stainless Steel Bowl, Galvanized Steel Pipe w/Yellow Polyurethane Paint, 1–1/4in. NPT Water Supply, Shower Exceeds Minimum 20 GPM Flow, Integral Flow Control included, UL Recognized To ANSI Z358.1–2009,

Manufacturer: Bradley, Manufacturer Part Number: S19314UUCombination Drench Shower w/ Halo Eyewash, Plastic Shower Head W/ SS Shroud And Plastic Bowl, Galvanized Steel Pipe w/Yellow Polyurethane Paint, 1–1/4in. NPT Water Supply, Shower Exceeds Minimum 20 GPM Flow, Integral Flow Control included, UL Recognized To ANSI Z358.1–2009, Hand and Foot Operation

Manufacturer: Hughes, Manufacturer Part Number: ABS-ROSEAn alternative to the standard shower nozzle on most unheated safety showers, simply replace the existing nozzle with the rose. Durable, yellow ABS material with 10-inch (252-mm) diameter.SPECIFICATIONSMaterial Specifications: ABS

Manufacturer: Hughes, Manufacturer Part Number: SS-ROSEAn alternative to the standard shower nozzle on most unheated safety showers, simply replace the existing nozzle with the rose. Durable, corrosion resistant stainless steel material with 10-inch (252-mm) diameter.SPECIFICATIONSMaterial Specifications: Stainless Steel

Manufacturer: Hughes, Manufacturer Part Number: TREADLE-GDesigned as an alternative means of operating the eye/face wash fountain, the treadle type foot control quickly attaches to an existing unit. As a fail-safe precaution, these eyewashes can still be operated by hand should the treadle be obstructed in any way. This G-style treadle is for use on most heated and unheated eye/fash wash and combination showers.SPECIFICATIONSMaterial Specifications: Steel

Manufacturer: Hughes, Manufacturer Part Number: TS-FOOT-EFDesigned as an alternative means of operating the eye/face wash fountain, the treadle type foot control quickly attaches to an existing unit. As a fail-safe precaution, these eyewashes can still be operated by hand should the treadle be obstructed in any way. This T-style treadle is for use on most self-draining combination safety showers.SPECIFICATIONSMaterial Specifications: Steel

Manufacturer: Bradley, Manufacturer Part Number: S19314FCombination Drench Shower w/ Halo Eyewash, Plastic Shower Head W/ SS Shroud And 304 Stainless Steel Bowl, Galvanized Steel Pipe w/Yellow Polyurethane Paint, 1–1/4in. NPT Water Supply, Shower Exceeds Minimum 20 GPM Flow, Integral Flow Control included, UL Recognized To ANSI Z358.1–2009,