$500 to $1,000

Manufacturer: Vestil, Manufacturer Part Number: VSSG-775Usable Width (Feet): 6 to 7, Collapsed Height (Feet): 7 1/2, In Use Height (Feet): 7 – Galvanized Folding Gate – Secure outside access during the day and add security at night with heavy–duty 15 gauge steel folding gates. Durable 3" rubber casters allow operator to quickly and fully retract gate when not in use. Center drop pin rests in pre–drilled hole to secure gate when extended. Easy installation! Lock is located on right side on single gates. Galvanized for durability. Constructed of steel U–channels riveted back to back using aircraft quality rivets and heavy–duty 1–1/2" x 1–1/2" vertical angles. Installation hardware included. Contact factory for additional sizes.

Manufacturer: Vestil, Manufacturer Part Number: VSSG-875Usable Width (Feet): 7 to 8, Collapsed Height (Feet): 7 1/2, In Use Height (Feet): 7 – Galvanized Folding Gate – Secure outside access during the day and add security at night with heavy–duty 15 gauge steel folding gates. Durable 3" rubber casters allow operator to quickly and fully retract gate when not in use. Center drop pin rests in pre–drilled hole to secure gate when extended. Easy installation! Lock is located on right side on single gates. Galvanized for durability. Constructed of steel U–channels riveted back to back using aircraft quality rivets and heavy–duty 1–1/2" x 1–1/2" vertical angles. Installation hardware included. Contact factory for additional sizes.

Manufacturer: Vestil, Manufacturer Part Number: VSSG-980Usable Width (Feet): 8 to 9, Collapsed Height (Feet): 7 1/2, In Use Height (Feet): 7 – Galvanized Folding Gate – Secure outside access during the day and add security at night with heavy–duty 15 gauge steel folding gates. Durable 3" rubber casters allow operator to quickly and fully retract gate when not in use. Center drop pin rests in pre–drilled hole to secure gate when extended. Easy installation! Lock is located on right side on single gates. Galvanized for durability. Constructed of steel U–channels riveted back to back using aircraft quality rivets and heavy–duty 1–1/2" x 1–1/2" vertical angles. Installation hardware included. Contact factory for additional sizes.

This 70 Gal Gemini² Dual Containment® Tank is designed to enhance your industrial spill management with outstanding efficiency and durability. Constructed using LPE SD 1.5 in a vibrant Gemini Blue, this tank offers an impressive 22% greater capacity per footprint than traditional cylindrical models. It delivers a dependable, secure storage solution that meets or exceeds EPA 49CFR secondary containment standards.Key Features• Pump mounting surface for seamless integration• Twist lid inspection port for quick visual examinations• Recessed mouse door allowing for optional dual wall bulkhead installation• Female threaded connections for secure assembly• Meets industry standards, including NSF/ANSI/CAN 61 certificationTechnical Specifications• Dimensions: L 24″ x W 24″ x H 41″• Material: Linear Polyethylene (LPE SD 1.5 with optional LPE HD 1.9)• Color Options: Standard Gemini Blue and Natural (translucent white) with custom colors available• Capacity: Approximately 70 Gal inner capacity and 84 Gal outer capacity, providing enhanced storage efficiencyApplications and BenefitsIdeal for storing chemicals such as biodiesel, fertilizers, and sodium hydroxide, this tank’s dual containment design ensures both environmental protection and cost savings in operations. Its robust construction and easy installation make it a valuable asset for facilities needing reliable chemical management. Learn more about our engineered solutions in our Peabody Engineering collection or explore our comprehensive Tank Containment products to address your operational requirements.

Experience dependable spill protection with the 70 Gal Gemini² Dual Containment® Tank. Designed to optimize storage efficiency, this tank delivers 22% more capacity per footprint than cylindrical models. Engineered to meet EPA 49CFR secondary containment requirements, it offers a secure and effective solution for hazardous liquid storage while lowering installation and assembly expenses.Key Benefits• Made from robust Linear Polyethylene (LPE SD 1.5 Tank) to ensure enduring performance• NSF/ANSI/CAN 61 certified to adhere to strict safety standards• Includes a pump mounting surface, female threaded connections, and a twist lid inspection port• Features an integrated molded mouse door for an optional dual wall bulkhead fitting for flooded suction and bottom fill applicationsSpecifications• Product: 70 Gal Gemini² Dual Containment® Tank• Dimensions: L 24" x W 24" x H 41"• Available Colors: Natural (translucent white), Gemini Blue, plus custom order options• Dual containment design provides added protection for hazardous materialsApplicationsIdeal for storing chemicals, hazardous liquids, and various industrial substances, the Gemini Dual Containment Tank is perfect for facilities that require a reliable, compliant spill management solution.For more industrial safety and spill management options, visit our Tank Containment collection or explore products from Peabody Engineering.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-72-PAccommodates Fork Width: 6", Fork Extension Inside Width: 6", Length: 72", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: CA-72-2Outer Diameter: 72", Capacity (Pounds): 2,000, Overall Height: 2", Starting vs. Maintaining Force: 35 lbs / 20 lbs, Ships Via: Truck – Manual Carousel – The Carousel rotates materials 360° with the assistance of an operator. Now loading and unloading operations can be done more efficiently; minimizes fatigue and risk of back injury. The carousel may be added to an existing work bench, scissor table, or simply placed on the floor. Constructed from two pieces of rolled structural angle (3/16" thick). A series of roller bearings transfer the load smoothly and evenly to the supporting surface. Four guide rollers keep the rings aligned.

Manufacturer: Vestil, Manufacturer Part Number: CA-72-4Outer Diameter: 72", Capacity (Pounds): 4,000, Overall Height: 2", Starting vs. Maintaining Force: 45 lbs / 25 lbs, Ships Via: Truck – Manual Carousel – The Carousel rotates materials 360° with the assistance of an operator. Now loading and unloading operations can be done more efficiently; minimizes fatigue and risk of back injury. The carousel may be added to an existing work bench, scissor table, or simply placed on the floor. Constructed from two pieces of rolled structural angle (3/16" thick). A series of roller bearings transfer the load smoothly and evenly to the supporting surface. Four guide rollers keep the rings aligned.

Manufacturer: Vestil, Manufacturer Part Number: CA-72-6Outer Diameter: 72", Capacity (Pounds): 6,000, Overall Height: 2", Starting vs. Maintaining Force: 55 lbs / 35 lbs, Ships Via: Truck – Manual Carousel – The Carousel rotates materials 360° with the assistance of an operator. Now loading and unloading operations can be done more efficiently; minimizes fatigue and risk of back injury. The carousel may be added to an existing work bench, scissor table, or simply placed on the floor. Constructed from two pieces of rolled structural angle (3/16" thick). A series of roller bearings transfer the load smoothly and evenly to the supporting surface. Four guide rollers keep the rings aligned.

Manufacturer: Vestil, Manufacturer Part Number: EH-7224Capacity: 11,900 lbs., Plate Thickness: ", Width: 72", Length: 24", Height Differential: 3" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-7224Capacity: 6,500 lbs., Width: 72", Length: 24", Height Difference: 3", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05007230Size (W x L): 72" x 30", Ht. Difference (8°/17%): 3", Ht. Difference (11°/19%): 4", Capacity: 5,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: EH-7230Capacity: 9,500 lbs., Plate Thickness: ", Width: 72", Length: 30", Height Differential: 4" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-7230Capacity: 5,400 lbs., Width: 72", Length: 30", Height Difference: 4", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: TAS-10-7236Capacity: 10,000 lbs., Overall Size: 72"W x 36"L, Height Difference: 5" – Aluminum Truck Dockboards with Steel Safety Curbs – This dockboard is designed for portability and safety. Deck is made of tough high strength aluminum treadplate. Safety curbs are painted yellow and are constructed of structural steel with cast tapered ends. Steel legs are bolted for increased durability. Canted locking legs for easier fork truck portability. Manufactured in compliance of OSHA.

Manufacturer: Vestil, Manufacturer Part Number: TAS-15-7236Capacity: 15,000 lbs., Overall Size: 72"W x 36"L, Height Difference: 5" – Aluminum Truck Dockboards with Steel Safety Curbs – This dockboard is designed for portability and safety. Deck is made of tough high strength aluminum treadplate. Safety curbs are painted yellow and are constructed of structural steel with cast tapered ends. Steel legs are bolted for increased durability. Canted locking legs for easier fork truck portability. Manufactured in compliance of OSHA.

Manufacturer: Vestil, Manufacturer Part Number: TAS-20-7236Capacity: 20,000 lbs., Overall Size: 72"W x 36"L, Height Difference: 5" – Aluminum Truck Dockboards with Steel Safety Curbs – This dockboard is designed for portability and safety. Deck is made of tough high strength aluminum treadplate. Safety curbs are painted yellow and are constructed of structural steel with cast tapered ends. Steel legs are bolted for increased durability. Canted locking legs for easier fork truck portability. Manufactured in compliance of OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05007236Size (W x L): 72" x 36", Ht. Difference (8°/17%): 4", Ht. Difference (11°/19%): 5", Capacity: 5,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06007236Size (W x L): 72" x 36", Ht. Difference (8°/17%): 4", Ht. Difference (11°/19%): 5", Capacity: 6,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: E-7236Capacity: 4,300 lbs., Width: 72", Length: 36", Height Difference: 5", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Wesco, Manufacturer Part Number: 230037Model #: WRV–72–EC. Welded frame and handles for maximum strength. Non–marking grey vinyl on all contact surfaces securely mounted to truck. 2" wide heavy duty web belt. Improved kick–out design allows operator to kick–out wheels with both hands on the truck. Retractable moldon rubber casters (3.5" diameter) help support load. Available with "Manual" belt tightening systems. 28.5" from noseplate to center of belt. WRV–72–EC FRAME: 053376. Steel Construction. Weight Capacity: 1200 lbs. 8" Moldon Rubber Wheels. 3.5" Moldon Rubber Casters. Twin Loop Handle. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 230019Model #: WRV–72. Welded frame and handles for maximum strength. Non–marking grey vinyl on all contact surfaces securely mounted to truck. 2" wide heavy duty web belt. Improved kick–out design allows operator to kick–out wheels with both hands on the truck. Retractable moldon rubber casters (3.5" diameter) help support load. Available with "Auto–Rewind" belt tightening systems. 28.5" from noseplate to center of belt. WRV–72 FRAME: 053376. Steel Construction. Weight Capacity: 1200 lbs. 8" Moldon Rubber Wheels. 3.5" Moldon Rubber Casters. Twin Loop Handle. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Vestil, Manufacturer Part Number: XHCR-72Usable Span Width (in.): 4–1/2, Single Wheel Uniform Capacity (lbs.): 10,000, Material: Aluminum – The Extruded Aluminum Hose and Cable Bridge is designed to protect air lines, electrical cords and computer cables from damage by fork trucks, carts, and personnel. This ramp has serrated edges for maximum traction and are lightweight for easy portability.

Manufacturer: Vestil, Manufacturer Part Number: BTA-07007230Uniform Capacity (lbs.): 7000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 67–3/4, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.