$500 to $1,000

Manufacturer: Vestil, Manufacturer Part Number: WP-3648-84BConvenient fork truck work platforms quickly and safely transport maintenance personnel where they are needed. Attaches to fork truck by inserting forks into fork pockets and securing platform to fork truck. Tine lock must be engaged to secure platform to forks. 42" high handrail with 21" high mid–rail on three sides. 60" high expanded metal backing on fourth side (84" high backing to meet California OSHA specifications). Includes checker floor plate platform and 36" long strap with hook to attach platform to fork truck. The usable fork pockets are 7–3/4"W x 3–3/8"H in rear and 7–3/4"W x 1–7/8"H in front. Capacity is 1,000 pounds. Welded steel construction. Powder coat blue finish.SPECIFICATIONSPlatform Size: 36"W x 48"L48" x 36" x 84" - 259 lbs.

Manufacturer: Vestil, Manufacturer Part Number: WP-4848-84BConvenient fork truck work platforms quickly and safely transport maintenance personnel where they are needed. Attaches to fork truck by inserting forks into fork pockets and securing platform to fork truck. Tine lock must be engaged to secure platform to forks. 42" high handrail with 21" high mid–rail on three sides. 60" high expanded metal backing on fourth side (84" high backing to meet California OSHA specifications). Includes checker floor plate platform and 36" long strap with hook to attach platform to fork truck. The usable fork pockets are 7–3/4"W x 3–3/8"H in rear and 7–3/4"W x 1–7/8"H in front. Capacity is 1,000 pounds. Welded steel construction. Powder coat blue finish.SPECIFICATIONSPlatform Size: 48"W x 48"L48" x 48" x 84" - 300 lbs.

Manufacturer: Vestil, Manufacturer Part Number: SWA-INDEXOptional Auto-Indexing 9, 12, or 18 Degree.

Manufacturer: UltraTech, Manufacturer Part Number: 9927 PASSIVELY FILTER HYDROCARBONS FROM STORMWATER IN OUTDOOR CONTAINMENT PRODUCTS. Replacement filter cartridge for XL Self–Bailer (UT–9926–0001). One cartridge per replacement pack. SPECIFICATIONS10 lbs.1 filter cartridge

Manufacturer: UltraTech, Manufacturer Part Number: 9926 PASSIVELY FILTER HYDROCARBONS FROM STORMWATER IN OUTDOOR CONTAINMENT PRODUCTS. The best protection for non–monitored containment sites Helps eliminate problems associated with the collection of rainwater in outdoor containment products Simple installation – can be connected to any outdoor containment product Hydrocarbon "sheens" and modest spills are captured – clean stormwater drains through the outflow port Larger or concentrated spills activate the "auto–shutoff" mechanism Manual shutoff valve can be used to secure all draining operations or to change out the filter cartridge Filters are quickly and easily replaced Optional Bulkhead Fitting required for containment units without a 3/4" NPT drain SPECIFICATIONS11 lbs.Absorbs up to 156 oz. of hydrocarbons20" L x 10" Dia.

Manufacturer: Spill 911, Manufacturer Part Number: A-DISPBAG-SM-RL 4 mil. polyethylene disposal bags are the same ones we use in our Spill Kits. Bags are yellow in color with bold black print on one side that reads "CAUTION Handle With Care". Bags are approximately 18" wide by 30" high. ***MUST BE Ordered in Rolls of 300 Bags*** SPECIFICATIONS300 bagsEach Bag is 18" W x 30" H

Manufacturer: UltraTech, Manufacturer Part Number: 865Utility Box, 15 cubic foot capacity, 5" hard wheels, Yellow: Versatile UtilityBox Can Be Used For SpillKits, Storage Bins and Much More! Large, 15 cu. ft. capacity. Forkliftable and lockable. Heavy–duty, double–walled lid is sloped to shed rain. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 868Utility Box, 15 cubic foot capacity, 8" pneumatic wheels, Yellow: Versatile UtilityBox Can Be Used For SpillKits, Storage Bins and Much More! Large, 15 cu. ft. capacity. Forkliftable and lockable. Heavy–duty, double–walled lid is sloped to shed rain. 25.125 x 4.625 x 4.625. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

The Yellow Utility Box UBX-Y-NW without wheels is a durable solution designed for fixed installations where mobility is not required. Built for industrial spill kits and diverse storage applications, this non-wheeled model distinguishes itself from competitors that offer wheeled alternatives. Its robust construction makes it the ideal option when you want to buy a yellow utility box or purchase the utility box model UBX-Y-NW from a reliable supplier.Manufactured by Vestil (Part Number: UBX-Y-NW), this utility box includes:Key Features Forklift accessible for efficient handling Lockable for enhanced security Heavy-duty, double-walled lid sloped to shed moisture Industrial-grade build ensuring durability in harsh environments Fixed design specifically for non-mobile applications Applications and BenefitsThis utility box provides versatile storage solutions for spill kits, storage bins, and other industrial needs. Its secure locking mechanism and rugged construction deliver reliable performance in demanding environments, ensuring operational safety and compliance. The fixed, non-wheeled design is perfectly suited for locations that require stable storage. Whether you are sourcing from the trusted Vestil collection or exploring our range in Spill Response Containers, this product meets strict industrial requirements. Discover our offerings at Spill 911 Inc. for comprehensive spill management and safety solutions designed for industrial and commercial applications.

Manufacturer: Vestil, Manufacturer Part Number: YR-FSFork lift pickup slots (usable on 24 inch centers).

Manufacturer: Bradley, Manufacturer Part Number: LK151560ZHV-200Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 15in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151560ZHV-202Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 15in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151560ZHV-203Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 15in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151572ZHV-200Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 15in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151572ZHV-202Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 15in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151572ZHV-203Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 15in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151860ZHV-200Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 18in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151860ZHV-202Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 18in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151860ZHV-203Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 18in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151872ZHV-200Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 18in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151872ZHV-202Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 18in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151872ZHV-203Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 18in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK181860ZHV-200Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. wide. The Locker configuration is 18in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK181860ZHV-202Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. wide. The Locker configuration is 18in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.