$500 to $1,000

Manufacturer: UltraTech, Manufacturer Part Number: 9926 PASSIVELY FILTER HYDROCARBONS FROM STORMWATER IN OUTDOOR CONTAINMENT PRODUCTS. The best protection for non–monitored containment sites Helps eliminate problems associated with the collection of rainwater in outdoor containment products Simple installation – can be connected to any outdoor containment product Hydrocarbon "sheens" and modest spills are captured – clean stormwater drains through the outflow port Larger or concentrated spills activate the "auto–shutoff" mechanism Manual shutoff valve can be used to secure all draining operations or to change out the filter cartridge Filters are quickly and easily replaced Optional Bulkhead Fitting required for containment units without a 3/4" NPT drain SPECIFICATIONS11 lbs.Absorbs up to 156 oz. of hydrocarbons20" L x 10" Dia.

Manufacturer: Spill 911, Manufacturer Part Number: A-DISPBAG-SM-RL 4 mil. polyethylene disposal bags are the same ones we use in our Spill Kits. Bags are yellow in color with bold black print on one side that reads "CAUTION Handle With Care". Bags are approximately 18" wide by 30" high. ***MUST BE Ordered in Rolls of 300 Bags*** SPECIFICATIONS300 bagsEach Bag is 18" W x 30" H

Manufacturer: UltraTech, Manufacturer Part Number: 865Utility Box, 15 cubic foot capacity, 5" hard wheels, Yellow: Versatile UtilityBox Can Be Used For SpillKits, Storage Bins and Much More! Large, 15 cu. ft. capacity. Forkliftable and lockable. Heavy–duty, double–walled lid is sloped to shed rain. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 868Utility Box, 15 cubic foot capacity, 8" pneumatic wheels, Yellow: Versatile UtilityBox Can Be Used For SpillKits, Storage Bins and Much More! Large, 15 cu. ft. capacity. Forkliftable and lockable. Heavy–duty, double–walled lid is sloped to shed rain. 25.125 x 4.625 x 4.625. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Vestil, Manufacturer Part Number: YR-FSFork lift pickup slots (usable on 24 inch centers).

Manufacturer: Bradley, Manufacturer Part Number: LK151560ZHV-200Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 15in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151560ZHV-202Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 15in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151560ZHV-203Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 15in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151572ZHV-200Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 15in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151572ZHV-202Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 15in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151572ZHV-203Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 15in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151860ZHV-200Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 18in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151860ZHV-202Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 18in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151860ZHV-203Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 18in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151872ZHV-200Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 18in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151872ZHV-202Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 18in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK151872ZHV-203Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. wide. The Locker configuration is 18in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK181860ZHV-200Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. wide. The Locker configuration is 18in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK181860ZHV-202Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. wide. The Locker configuration is 18in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK181860ZHV-203Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. wide. The Locker configuration is 18in. deep. The height of the Locker is 60in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK181872ZHV-200Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 18in. wide. The Locker configuration is 18in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK181872ZHV-202Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 18in. wide. The Locker configuration is 18in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK181872ZHV-203Lenox Z Locker is constructed of 3/8in. and 1/2in. HDPE material. Lenox Z Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 18in. wide. The Locker configuration is 18in. deep. The height of the Locker is 72in. This locker has two tiers and has two doors per locker base. The standard hasp lock is constructed of 12 guage stainless and accepts standard pad locks with a shank of 9/32in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Zing, Manufacturer Part Number: 7116ZING RecycLockout Lockout Tagout Station provides the flexibility you need to build a comprehensive Lockout Tagout program. Station board has the flexibility to accommodate 1.5" or 3" shackle length padlocks and use unique hooks that allow two padlocks or hasps per hook. Padlocks can also be locked to the hooks for extra security. Lockout board is made from heavy-duty 99.9% recycled PETG that is break and impact resistant. Board and lockout devices are made from high content recycled materials that are UL Validated and support sustainability initiatives and LEED credits. Board measures 23"H x 23"W. Made in the USA. Station contents include: Qty. 24 Padlocks, 1.5" shackle, keyed different with 1 key per padlock, color red Qty. 4 Padlocks, 3" shackle, keyed different with 1 key per padlock, color red Qty. 2 Small Steel Hasp, 1" closed hole, accommodates up to 6 padlocks with shackles to 3/8" dia. Qty. 2 Large Steel Hasp, 1-1/2" closed hole, accommodates up to 6 padlocks with shackles to 3/8" dia. Qty. 10 Lockout Tags with legend DO NOT OPERATE and 50 lb. pull strength Qty. 10 Cable Ties