$50 to $100

Manufacturer: Vestil, Manufacturer Part Number: VCC-115-1Optional 115 Volt 1 Phase AC Power change for powered units.

Manufacturer: Vestil, Manufacturer Part Number: VCC-460-3Optional 46 Volt 3 Phase AC Power change for powered units.

Manufacturer: SPC, Manufacturer Part Number: SC-MB The First AND Only Modular AND Mobile Storage Cabinet for Sorbents! Now there's a brand new way to store and access sorbents for all your leaks, drips and spills. The SPC Sorbent Center is designed to be flexible and customizable to meet all your facility's spill control needs. Hang ONE on the wall or store it under your workbench Stack TWO or THREE to make a custom sorbent cabinet Attach the optional WHEELS and you have a Mobile Spill Control Center Sorbent Centers ship ASSEMBLED and ready for action Each Sorbent Center INCLUDES an Accessory Pack with gloves, goggles, disposal bags/ties and an emergency handbook Lock Out/Tag Out Doors for added SECURITY Available in a VARIETY of configurations for Universal, Oil–Only or Hazardous sorbents SORBENT CENTER W/PADS & ROLL includes 100 – 15" x 19" pads, 1 – 15" x 150' roll, 1 – 15" dowel, accessory pack SORBENT CENTER W/PADS & SOCS includes 100 – 15" x 19" pads, 12 – 3" x 4' socs, accessory pack SORBENT CENTER W/SOCS & PILLOWS includes 12 – 3" x 4' socs, 8 – 18" x 18" pillows, accessory pack SPECIFICATIONS2 lbs.

Manufacturer: Haws, Manufacturer Part Number : 6455Model 6455 is a polished stainless steel flat waste strainer with grid, washer locknut and slip joint tailpiece. Flange diameter 4-1/2" (11.4 cm) fits 3-1/2" to 4" (8.9 to 10.2 cm) drain holes; 1/1-2" O.D. (3.8) slip joint tailpiece is 4" (10.2 cm) long.

Manufacturer: Haws, Manufacturer Part Number : 6454Model 6454 is a polished chrome-plated solid brass flat waste strainer with vandal-resistant locking lugs, washer, locknut and slipjoint tailpiece. Dimensions: flange dia, 2-1/2" (6.3 cm) fits 2" (5.1 cm) drain hole; 1-1/2" O.D. (3.8 cm) slipjoint tailpiece x 1-1/2" (3.8 cm) long.

Manufacturer: Haws, Manufacturer Part Number : 6458Model 6458 is a polished chrome-plated brass flat waste strainer with grid, washer, locknut and slipjoint tailpiece. Dimensions: flange dia, 3" (7.6 cm) fits all 2" (5.1 cm) drain holes; 1-1/2" O.D. (3.8 cm) slipjoint tailpiece x 4" (10.2 cm) long.

Manufacturer: SpillTech, Manufacturer Part Number: GFPIL848Water Absorbing Flat Pillows • 7 pillows/package • 48" L x 8" WUnobtrusive Flat Pillow is easy to store and perfect for absorbing water leaks, drips or even condensation in retail and institutional settings. Superabsorbent polymer (SAP) pillow offers excellent water absorption — absorbs 36X its own weight! Ideal for handling water leaks, spills and condensation in large freezer or cooler areas in hospitals, restaurants, convenience stores and other institutions Flat Pillows weigh less than traditional pillows, making them cheaper to ship; low-profile design takes up less room for convenient storage As it absorbs, the pillow swells and alerts workers to a spill 100% post-industrial recycled filler Suited for water; not for use with acids, bases or aggressive fluids

Manufacturer: SpillTech, Manufacturer Part Number: GFPIL812Water Absorbing Flat Pillows • 30 pillows/package • 12" L x 8" WUnobtrusive Flat Pillow is easy to store and perfect for absorbing water leaks, drips or even condensation in retail and institutional settings. Superabsorbent polymer (SAP) pillow offers excellent water absorption — absorbs 36X its own weight!_x000B_ Ideal for handling water leaks, spills and condensation in large freezer or cooler areas in hospitals, restaurants, convenience stores and other institutions_x000B_ Flat Pillows weigh less than traditional pillows, making them cheaper to ship; low-profile design takes up less room for convenient storage_x000B_ As it absorbs, the pillow swells and alerts workers to a spill_x000B_ 100% post-industrial recycled filler_x000B_ Suited for water; not for use with acids, bases or aggressive fluids

Manufacturer: Accuform, Manufacturer Part Number: KDD275Water Cooler Tether Lockout. Lockout the access to opening of the portable water cooler, and prevent possible cross–contamination of the water. Potable water in the water cooler must be of drinking quality. The Water Cooler Tether Lockout device, secured with a standard padlock, can prevent unwanted entry into the water cooler. Attach to the padlock a specially marked PF–Cardstock Tag to identify the water cooler content with specific information. The plastic tether and tab lockout assembly fastens to the water cooler lid and body with stainless steel screws (provided). When the water cooler is open, the tether design prevents the lid from coming into contact with the cooler body or the ground. Designed to fit the top of most pull–off lid style water coolers.

Manufacturer: Vikan, (Formerly Remco) Manufacturer Part Number: 29735Ideally suited to all kinds of cleaning projects—including walls, tanks, equipment, and decks—this system puts the water where you need it. This aluminum handle is telescopic with a range of 65" — 116". It comes with a hose barb. Color: White.

Manufacturer: Vikan, (Formerly Remco) Manufacturer Part Number: 2973Q5Ideally suited to all kinds of cleaning projects—including walls, tanks, equipment, and decks—this system puts the water where you need it. The quick connect feature connects a standard 3/4" hose to an integrated system, with an automatic shut–off, so you can change tools easily without getting wet. This aluminum handle is telescopic with a range of 65" — 116". Color: White.

Manufacturer: Haws, Manufacturer Part Number : 6422Model 6422 quick change replacement filter cartridge is a carbon bed cartridge with a 20-micron post filter designed to effectively reduce unwanted tastes, odor and chlorine taste & odor from drinking water. The cartridge filter is easily changed with a quarter-turn of the filter. Water is automatically shut off during the change eliminating the need for additional shut-off valves to and from the filter system. The 6422 provides a filter life of 2500 gallons (9463 L). Filter is tested and certified by NSF/ANSI to Standard 42 for the reduction of Chlorine Taste & Odor.

Manufacturer: Haws, Manufacturer Part Number : 6426Model 6426 lead removal 10" x 2" (25.4 x 5.1 cm) in-line filter shall reduce lead from incoming water to levels below 15 ppb (@ flow rate = 0.5 gpm (1.9 L); pressure = 60 psi (4.2 bar)) for up to 500 gallons (1893 L), and filters particulate lead to 10 microns and absorbs soluble lead, with maximum flow of .5 gpm (1.9 L). Therefore, only one bubbler may be operated at a time on dual units. Does not leach lead once absorbed.

Manufacturer: Justrite, Manufacturer Part Number: 28452WaterFilled Boom Diverters Temporarily divert and control fluid for easy cleanup or recovery. Use the waterfilled booms in storm water management, portable washdown/pressure washing diversion, spill diversion, and equipment and personnel decontamination. Flexible PVC film construction conforms to uneven surfaces such as asphalt or concrete to form a diversionary barrier away from storm drains or as a holding area for wet vacuum operations. Features easyopen push plug for filling with standard water hose. Helps comply with EPA for stormwater regulations.SPECIFICATIONS3 lbs1 diverter9" x 10'

Manufacturer: Justrite, Manufacturer Part Number: 28450Water–Filled Boom Diverters Temporarily divert and control fluid for easy cleanup or recovery. Use the water–filled booms in storm water management, portable washdown/pressure washing diversion, spill diversion, and equipment and personnel decontamination. Flexible PVC film construction conforms to uneven surfaces such as asphalt or concrete to form a diversionary barrier away from storm drains or as a holding area for wet vacuum operations. Features easy–open push plug for filling with standard water hose. Helps comply with EPA for stormwater regulations.SPECIFICATIONS2 lbs1 diverter9" x 5'

Manufacturer: Water-Jel, Manufacturer Part Number: WJTA1728LFAModel Number: WJTA1728|UOM: BX - First Aid and Emergency Products

Manufacturer: Justrite, Manufacturer Part Number: 28432Waterproof Tarps Protect drums and equipment to avoid contamination or damage. Brass grommets in corners offer a convenient way to secure the tarp in place. Shield equipment from the harsh effects of direct sunlight, sand, dust and rain with these protective covers. Waterproof, lightweight vinyl–coated fabric reduces the effect of the environment. Use under berm products to provide additional puncture and wear–resistance.SPECIFICATIONS6 lbs1 tarp5' x 5'

Manufacturer: Vestil, Manufacturer Part Number: WS-5-RVThe dockleveler Weather Stripping keeps out pests and rodents and maintains the proper working environment. The kit includes: (2) pre-cut side strips, (1) precut foam insulator for the rear of the pit and installation hardware. The Dual Vinyl has a white dual-seal that attaches to the side of docklevelers with self-tapping sheet metal screws. The Replacement Vinyl slides into extruded channel that is attaches with self-tapping screws. MFG Part# WS-5-RV

Manufacturer: Vestil, Manufacturer Part Number: WS-6-RVThe dockleveler Weather Stripping keeps out pests and rodents and maintains the proper working environment. The kit includes: (2) pre-cut side strips, (1) precut foam insulator for the rear of the pit and installation hardware. The Dual Vinyl has a white dual-seal that attaches to the side of docklevelers with self-tapping sheet metal screws. The Replacement Vinyl slides into extruded channel that is attaches with self-tapping screws. MFG Part# WS-6-RV

Manufacturer: Vestil, Manufacturer Part Number: WS-8-RVThe dockleveler Weather Stripping keeps out pests and rodents and maintains the proper working environment. The kit includes: (2) pre-cut side strips, (1) precut foam insulator for the rear of the pit and installation hardware. The Dual Vinyl has a white dual-seal that attaches to the side of docklevelers with self-tapping sheet metal screws. The Replacement Vinyl slides into extruded channel that is attaches with self-tapping screws. MFG Part# WS-6-RV

Manufacturer: Vestil, Manufacturer Part Number: SW-4-PSWThe Truck Mounted Strap Winch tightens down loads to eliminate shifting. This Strap Winch is the weld-on design. Strap and chrome plated winch bar sold separately. MFG Part# SW-4-PSW

Manufacturer: Wesco, Manufacturer Part Number: 54045Model #: 233CP25. Wheel Kit w/ axle, 2 wheels and appropriate hardware. KIT: WHEEL "P" WESCO LITE SERIES. Steel/Rubber Construction. 10" Pneumatic Wheels. Cobra–Lite Components. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 54046Model #: 233CP12. Wheel Kit w/ axle, 2 wheels and appropriate hardware. KIT: WHEEL "R2" WESCO–LITE. Poly/Rubber Construction. 8" Moldon Rubber Wheels. Cobra–Lite Components. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 54048Model #: 520CP61. Wheel Kit w/ axle, 2 wheels and appropriate hardware. KIT: WHEEL "R3" WESCO LITE. Aluminum/Moldon Construction. 8" Moldon Rubber Wheels. Cobra–Lite Components. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.