$50 to $100

Manufacturer: Vestil, Manufacturer Part Number: FWD-1824-3RThe Fiberwood Dolly features a rubber padded surface and two (2) hand holes to carry the unit. The PVC edge strip protects walls from scrapes. The dolly rolls on wheels which are non-marring and oil-resistant.

Manufacturer: Vikan, (Formerly Remco) Manufacturer Part Number: 6269Need help in high places? The removal of ceiling condensation has always been a nuisance, relying on a variety of fixes. Throw out the sponges—we have the right tool! This specialized squeegee and handle system removes and captures condensation effectively. Our fiberglass handle has a range of 7'2" – 18'5".

Manufacturer: Vikan, (Formerly Remco) Manufacturer Part Number: 6269BNeed help in high places? The removal of ceiling condensation has always been a nuisance, relying on a variety of fixes. Throw out the sponges—we have the right tool! This specialized squeegee and handle system removes and captures condensation effectively. Our fiberglass handle has a range of 7'2" – 18'5" and comes with a bottle.

Manufacturer: Vikan, (Formerly Remco) Manufacturer Part Number: 6269NNeed help in high places? The removal of ceiling condensation has always been a nuisance, relying on a variety of fixes. Throw out the sponges—we have the right tool! This specialized squeegee and handle system removes and captures condensation effectively. Our fiberglass handle has a range of 7'2" – 18'5" and comes with a drain.

Manufacturer: Haws, Manufacturer Part Number : 6428Model 6428 replacement filter is used with the Haws 1200 series water coolers. It is a carbon block filter cartridge with a service life of 1 year/3000-gallons (11356 L). Filter contains an onboard chip to store total gallon usage; this chip interfaces with an Electronic Lifecycle Control system to allow water flow only until the filter reaches its total gallon capacity. Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and cysts.

Manufacturer: First Aid Only, Manufacturer Part Number: 225UThe Kit approved by the AMA. Get the kit that exceeds federal OSHA requirements and has the approval of the American Medical Association. 196 piece comprehensive first aid kit contains 20 key first aid products including quality bandages, compresses, eye care products, ointment and wipes, plus a 6–piece CPR pack. Plastic case w/handle. Wall or vehicle mountable.SPECIFICATIONS196 Pieces1 kit

Manufacturer: North American Safety, Manufacturer Part Number: VG-1050Fixed Position Locking Bar for Versa-Guard.

Manufacturer: Checkers, Manufacturer Part Number: FS7015~2" Hitch Mount with Threaded Hex Base (Non-Powered).

Manufacturer: Checkers, Manufacturer Part Number: FS8-16-QD-O3, 5, 6, 8, 10, or 12 foot lengths available. Quickly attach or detach from vehicle. Choose from heavy duty orange, green or yellow flag. Whip constructed of premium fiberglass resin. See additional accessories. Quick Disconnect Base has stainless steel components. 8 ft Quick Disconnect Non-Lighted Whip with 16" W x 16" H Heavy Duty Orange Flag.

Manufacturer: Checkers, Manufacturer Part Number: FS8L-QD-O~3, 5, 6, 8, 10, or 12 foot lengths available. ~Mounting base included. ~Wide variety of lighting options. ~Choose from heavy duty orange, green or yellow flag. ~Whip constructed from premium fiberglass resin. ~Quick Disconnect Base has stainless steel components, 8 ft Quick Disconnect Whip with 12" W x 11" H Heavy Duty Orange Flag with Amber light.

Manufacturer: Checkers, Manufacturer Part Number: FS3009LD~ONLY for Light Duty non-lighted whips up to 7 ft.

Manufacturer: Accuform, Manufacturer Part Number: TLS801Flat Metal Tag Seals. Tag seals are tin–plated steel bands featuring a hook–lock mechanism that secures in one motion with locking strength of 100 lbs. Seals are 8 3/8" x 3/8". Identification is embossed along the length. Choose Standard Edge with wording SEALED or Rolled Edge with wording SECURED. Stock seals are random start sequential numbering.SPECIFICATIONSSTYLE: Rolled Edge

Manufacturer: UltraTech, Manufacturer Part Number: 1335 Convenient, Compact and Foldable Trays Capture Small Leaks and Spills. Simply unroll, then unfold no straps, supports or sidewalls to set up One piece units no components or pieces to lose Highvisibility, 18 oz. PVC fabric provides rugged durability and excellent chemical compatibility Six sizes available to fit almost any application Folds/rolls into a small size Utility tie provides easy and convenient storage and portability SPECIFICATIONS1.5 gal. Sump Capacity - 1 lb.1 tray12" L x 12" W x 4.75" H

Manufacturer: UltraTech, Manufacturer Part Number: 1330 Convenient, Compact and Foldable Trays Capture Small Leaks and Spills. Simply unroll, then unfold – no straps, supports or sidewalls to set up One piece units – no components or pieces to lose High–visibility, 18 oz. PVC fabric provides rugged durability and excellent chemical compatibility Six sizes available to fit almost any application Folds/rolls into a small size Utility tie provides easy and convenient storage and portability SPECIFICATIONS5 gal. Sump Capacity - 2 lbs.1 tray18" L x 18" W x 4.75" H

Manufacturer: UltraTech, Manufacturer Part Number: 1331 Convenient, Compact and Foldable Trays Capture Small Leaks and Spills. Simply unroll, then unfold – no straps, supports or sidewalls to set up One piece units – no components or pieces to lose High–visibility, 18 oz. PVC fabric provides rugged durability and excellent chemical compatibility Six sizes available to fit almost any application Folds/rolls into a small size Utility tie provides easy and convenient storage and portability SPECIFICATIONS6.5 gal. Sump Capacity - 3 lbs.1 tray24" L x 24" W x 4.75" H

Manufacturer: UltraTech, Manufacturer Part Number: 1332 Convenient, Compact and Foldable Trays Capture Small Leaks and Spills. Simply unroll, then unfold – no straps, supports or sidewalls to set up One piece units – no components or pieces to lose High–visibility, 18 oz. PVC fabric provides rugged durability and excellent chemical compatibility Six sizes available to fit almost any application Folds/rolls into a small size Utility tie provides easy and convenient storage and portability SPECIFICATIONS9 gal. Sump Capacity - 4 lbs.1 tray30" L x 30" W x 4.75" H

Manufacturer: UltraTech, Manufacturer Part Number: 1333 Convenient, Compact and Foldable Trays Capture Small Leaks and Spills. Simply unroll, then unfold – no straps, supports or sidewalls to set up One piece units – no components or pieces to lose High–visibility, 18 oz. PVC fabric provides rugged durability and excellent chemical compatibility Six sizes available to fit almost any application Folds/rolls into a small size Utility tie provides easy and convenient storage and portability SPECIFICATIONS17 gal. Sump Capacity - 5 lbs.1 tray42" L x 42" W x 4.75" H

Manufacturer: Vestil, Manufacturer Part Number: FL-ADJ-46This one of a kind Adjustable Height Floor Lock includes an adjustable height foot pad that will work on carts with different caster heights. The adjustable height feature provides uniform locking and safety unlocking force for better ergonomic operation. This feature also keeps the floor lock working properly as spring and pads wear over time. Height is adjustable by turning the bottom pad. The bottom pad includes suction-cups for extra grip.

Manufacturer: Haws, Manufacturer Part Number : 6394Model 6394 flow control is engineered to provide a proper drinking stream height at pressures varying from 30 - 90 psi (2.1 - 6.2 bar). It is important that the flow control selected match the bubbler orifice. Lead-free Tellurium copper coupling with .4 gpm (1.5 L) flow rate. Includes cone, friction washers and slip joint nut. 9/16" (1.4 cm) OD inlet x 1/2" NPT(F) outlet.

Manufacturer: Vestil, Manufacturer Part Number: LAD-GATE-50-EZSafety features are great asset in any workplace, but when it comes to ladders you cant be too careful. The optional safety gate is a perfect addition to your rolling ladder. With a simple press of the foot, the safety gate is engaged, blocking access to the ladder. The unit is constructed of powered coated steel for long term use and sustainability. MFG Part# LAD-GATE-50-EZ

Manufacturer: Vestil, Manufacturer Part Number: F4-36FORK BLADE PROTECTORS POLYETHYLENE 4X32

Manufacturer: Vestil, Manufacturer Part Number: F4-42FORK BLADE PROTECTORS POLYETHYLENE 4X42

Manufacturer: Vestil, Manufacturer Part Number: F4-48FORK BLADE PROTECTORS POLYETHYLENE 4X48

Manufacturer: Vestil, Manufacturer Part Number: F4-60FORK BLADE PROTECTORS POLYETHYLENE 4X60