Manufacturer: Checkers, Manufacturer Part Number: WLFS.4LED.BReplaceable LED Circuit. Replaceable Screw-On Clear Lens. O-Ring Waterproof Lens Seal. Stainless Steel Hex Base, Waterproof Adaptable Light, Color: Blue, Non-Flashing, LEDs: 4, 12-24 Volts, .20 Amps, Lumens: 500.

Manufacturer: Checkers, Manufacturer Part Number: WLFS.4LED.GReplaceable LED Circuit. Replaceable Screw-On Clear Lens. O-Ring Waterproof Lens Seal. Stainless Steel Hex Base, Waterproof Adaptable Light, Color: Green, Non-Flashing, LEDs: 4, 12-24 Volts, .20 Amps, Lumens: 500.

Manufacturer: Checkers, Manufacturer Part Number: WLFS.4LED.GFReplaceable LED Circuit. Replaceable Screw-On Clear Lens. O-Ring Waterproof Lens Seal. Stainless Steel Hex Base, Waterproof Adaptable Light, Color: Green, Flashing, LEDs: 4, 12-24 Volts, .20 Amps, Lumens: 500.

Manufacturer: Checkers, Manufacturer Part Number: WLFS.4LED.RReplaceable LED Circuit. Replaceable Screw-On Clear Lens. O-Ring Waterproof Lens Seal. Stainless Steel Hex Base, Waterproof Adaptable Light, Color: Red, Non-Flashing, LEDs: 4, 12-24 Volts, .20 Amps, Lumens: 500.

Manufacturer: Checkers, Manufacturer Part Number: WLFS.4LED.WReplaceable LED Circuit. Replaceable Screw-On Clear Lens. O-Ring Waterproof Lens Seal. Stainless Steel Hex Base, Waterproof Adaptable Light, Color: White, Non-Flashing, LEDs: 4, 12-24 Volts, .20 Amps, Lumens: 500.

Manufacturer: Checkers, Manufacturer Part Number: WLFS.4LED.WFReplaceable LED Circuit. Replaceable Screw-On Clear Lens. O-Ring Waterproof Lens Seal. Stainless Steel Hex Base, Waterproof Adaptable Light, Color: White, Flashing, LEDs: 4, 12-24 Volts, .20 Amps, Lumens: 500.

Manufacturer: Checkers, Manufacturer Part Number: 05.WL.4LED.B4 LED Whip Light Circuit Assembly - Blue.

Manufacturer: Checkers, Manufacturer Part Number: 05.WL.4LED.R4 LED Whip Light Circuit Assembly - Red.

Manufacturer: Checkers, Manufacturer Part Number: 05.WL.4LED.A4 LED Whip Light Circuit Assembly - Amber.

Manufacturer: Checkers, Manufacturer Part Number: 05.WL.4LED.G4 LED Whip Light Circuit Assembly - Green.

Manufacturer: Checkers, Manufacturer Part Number: 05.WL.4LED.W4 LED Whip Light Circuit Assembly - White.

Manufacturer: Durham, Manufacturer Part Number: 303-2S-9521" wide, steel, hose cabinet, 2 fixed dividers, color: gray Mfg Part#: 303-2S-95***MINIMUM ORDER OF 50 UNITS***

Manufacturer: Eagle, Manufacturer Part Number: B-6044 qt. Metal - Red Bench Can

Manufacturer: Eagle, Manufacturer Part Number: 1732Forget About Painting! No need to paint and scrape, these Eagle® Bumper Post Sleeves make old bollard posts look like NEW! High–density polyethylene construction won't fade, rust or crack. Eliminates annual scraping and painting while helping to protect vehicles and the post from impact damage. Unique vertical ribs provide extra impact protection while allowing for easy slide–on installation. Sleeves are 56" long and can be trimmed for an exact fit. Available in your choice of Yellow, White, Red, Green, Orange, Lime, Brown, Black or Handicap Blue. Please specify color when ordering. 72" sleeves are also available – call us for details.SPECIFICATIONS4 lbs.1 post sleeve5.75" O.D., 4.75" I.D.

Manufacturer: UltraTech, Manufacturer Part Number: 2115The Circular Drain Stopper! Prevent spills and runoff from entering drains. These polyurethane plugs form a tight, chemicalresistant seal. Removes easily when normal drain functionality is desired. Available in seven sizes from 2” to 12” in diameter. Drain Plug Kit includes 2”, 3” and 4” plugs packaged in a plastic carrying case. Drain Plugs are tapered. The listed size is the measurement at the middle of the plug. Tapered design wedges securely into standard drains to stop any flow Eyebolts are removable, allowing installation of grating with Drain Plug in place Nonabsorbing, easily cleaned for repeated use SPECIFICATIONS3 lbs.1 plugFor 4" diameter drains

Manufacturer: Eagle, Manufacturer Part Number: 1735RWSHDPE Smooth Bumper Post Sleeve with Reflective Strips. Fits over 4" post – Red with two white strips. Height may be trimmed for exact fit.SPECIFICATIONS4 lbs.1 post sleeve4.75" I.D.

Manufacturer: Eagle, Manufacturer Part Number: 1735YRSHDPE Smooth Bumper Post Sleeve with Reflective Strips. Fits over 4" post – Yellow with two red strips. Height may be trimmed for exact fit.SPECIFICATIONS4 lbs.1 post sleeve4.75" I.D.

Manufacturer: Heskins, Manufacturer Part Number: CR4NCoarse Resilient anti slip tape is a bare skin friendly non-abrasive tape, ideal for areas that are exposed to water. Coarse resilient is superb for fast paced environments that have strict hygiene standards, as it is easy to clean. Certified High Traction by the NFSI

Manufacturer: Heskins, Manufacturer Part Number: MAR4NMarine anti slip tape is a non-abrasive material, Unlike our standard Safety Grip anti skid tape, this material is made by using rounded granules, known as S2, like small glass beads, allowing for a strong grip tape without compromising the comfort or easy cleaning. This material is mop friendly.

Manufacturer: Checkers, Manufacturer Part Number: FSEXT-4-DUD~4 foot extension.

Manufacturer: Checkers, Manufacturer Part Number: FSEXT-4~Includes Hot Plug. ~4 foot extension.

Manufacturer: Vestil, Manufacturer Part Number: M-4-36Overall Size: 36"L x 4"W x 4"H – Extruded Bumper – Protect against the heavy impact and damaging results of semi–trailers and trucks with these Extruded Fender Bumpers. Made of all weather and abrasion resistant rubber. The half–oval shape allows for effective fendering action over a wide radius. A metal plate is located inside 4" and 6" projection bumpers for support while the 2" unit comes with one washer per hole. Custom lengths available up to 10 feet. Installation hardware not included.

Manufacturer: Justrite, Manufacturer Part Number: 14002Nonmetallic Dispensing Cans permit easy, one–hand dispensing of liquids directly onto work surface. Brass dispenser valves are leakproof and self–closing to minimize spills and control excess. Brass valves are FM–approved and recommended for flammables. Rugged high–density polyethylene body is textured and shaped for a firm grip.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Vestil, Manufacturer Part Number: BPC-24-4.5Use With Model: BOL–24–4.5, Height: 24", Inside Diameter: 4 13/16" – Plastic Bollard Covers – Eliminate the need for costly scraping and painting of unsightly bollards. The low density polyethylene thermoplastic molded sleeves slide over existing bollards. Covers are 1/4" thick. No hardware needed. Additional sizes, thicknesses, and colors available. Contact factory.