Manufacturer: Krueger Sentry, Manufacturer Part Number: B-30-.75The Barrel Gauge Type B is a reliable, swing arm type drum gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Barrel Gauge Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, Nitrophyl Floats. This is a Barrel Gauge for a 30 gallon drum, .75" NPT opening.

Manufacturer: Krueger Sentry, Manufacturer Part Number: B-55-.75The Barrel Gauge Type B is a reliable, swing arm type drum gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Barrel Gauge Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, Nitrophyl Floats. This is a Barrel Gauge for a 55 gallon drum, .75" NPT opening.

Manufacturer: Eagle, Manufacturer Part Number: UI-10-FS1 gal. Metal - Red w/F-15 Funnel Type I Safety Can

Manufacturer: Eagle, Manufacturer Part Number: UI-10-SB1 gal. Metal - Blue (Kerosene) Type I Safety Can

Manufacturer: Eagle, Manufacturer Part Number: UI-10-SG1 gal. Metal - Green (Oils or Combustibles) Type I Safety Can

Manufacturer: Eagle, Manufacturer Part Number: UI-10-SY1 gal. Metal - Yellow (Diesel) Type I Safety Can

Manufacturer: Eagle, Manufacturer Part Number: B-601-EL1 qt. Metal - Red Bench Can

Manufacturer: Vestil, Manufacturer Part Number: VST-1-YColor: Yellow, Base Size (WxD): 18" x 12", Overall Height: 12", Top Step (WxD): 18"x12", Capacity (Pounds): 500 – Polyethylene Step Stools – When items are out of reach, do not strain, simply step up with one of our Polyethylene Step Stools. Available in one, two and three step configurations. The two and three step units have rear opening access storage compartments. Individual step depth is 9" with a top step depth of 12". All models have rubber feet and a non–skid tape surface. Hand holes are standard for easy one person transportation.

Manufacturer: Incom, Manufacturer Part Number: GHS1299Provide your employees with a quick and easy way to identify Personal Protective Equipment & Hazard Class requirements. Labels are manufactured on a high gloss paper stock with pressure sensitive adhesive for ease of application and longer durability. Designed to be used with your in house labeling system where color printing isn't an option. Make clean, professional looking labels in minutes. Labels are printed in sheets and padded with a cardboard backer for ease of use. Each sheet is perforated to allow removal when completed. GHS1299 — 1" assorted Pictogram pad. 1,120 labels total. 140 labels of the Flame pictogram, 140 labels of the Flame over Circle pictogram, 140 labels of the Corrosion pictogram, 140 labels of the Health Hazard pictogram, 140 labels of the Exclamation Mark pictogram, 140 labels of the Gas Cylinder pictogram, 140 labels of the Skull and Crossbones pictogram, 80 labels of the Exploding Bomb pictogram, 60 labels of the Environment pictogram. ***A $10.00 handling fee will be added to freight for all GHS product orders under $100.00***SPECIFICATIONSGHS hazard pictogram labels

Manufacturer: Vestil, Manufacturer Part Number: BOL-36-2Bollards can be used both indoors and outdoors to protect work areas, racking and personnel. Powder coated safety yellow finish. Molded rubber caps are removable on 4" and 5" diameter units. Steel caps are welded on the 1" diameter units. Base plates include four (4) pre–drilled mounting holes. Mounting kits and replacement caps available. Welded steel construction. 36" Height.

Manufacturer: Vestil, Manufacturer Part Number: BOL-42-2Bollards can be used both indoors and outdoors to protect work areas, racking and personnel. Powder coated safety yellow finish. Molded rubber caps are removable on 4" and 5" diameter units. Steel caps are welded on the 1" diameter units. Base plates include four (4) pre–drilled mounting holes. Mounting kits and replacement caps available. Welded steel construction. 42" Height.

Manufacturer: Vestil, Manufacturer Part Number: BOL-48-2Bollards can be used both indoors and outdoors to protect work areas, racking and personnel. Powder coated safety yellow finish. Molded rubber caps are removable on 4" and 5" diameter units. Steel caps are welded on the 1" diameter units. Base plates include four (4) pre–drilled mounting holes. Mounting kits and replacement caps available. Welded steel construction. 48" Height.

Manufacturer: Enpac, Manufacturer Part Number: 5750-YEYour Temporary Storage Solution! A temporary storage solution that’s simple to set up and use! SpillPals provide incidental spill control during temporary storage of drums, machine parts, tanks and more. They can also be used as a wash–down pad or pumping station. Drive in and out with a hand truck or forklift. 4” thick foam sidewalls spring back into place, eliminating the need for a separate ramp for access! Excellent rip, tear and chemical resistance properties. Included grates keep drums or equipment above spilled liquids. Folded units ship easily Stores on a shelf – frees up valuable floor space 6 and 8–drum units meet EPA 40 CFR 264.175 regulations ⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.SPECIFICATIONS10 gal. Sump Capacity - 11 lbs.1 spillpal25" L x 24" W x 4" H

Manufacturer: Enpac, Manufacturer Part Number : ENP-PG1PetroGuard® is a super absorbent polymer that works instantly and is designed to solidify liquids into non-leaching solids. This absorbent has the ability to absorb hydrocarbons and petroleum products and is known for its 4:1 absorption capacity. It has the ability to product a low-volumetric barrier that immobilizes oil on land or water. The 1-Gallon Jug is best used to absorb oils from roadways and sealing ditches to prevent further penetration of hydrocarbons into soil. It is also useful for creating a dam around drains and sewers in case of a spill or during maintenance. Key features: -Absorbs hydrocarbons faster than competing polymers -Higher absorption ratio by weight than others -Encapsulates hydrocarbons – will not release or “leach” -Permanently buoyant -Cost effective -Labor saving -Will not dissolve in water -Non-toxic -Easily collected and disposed of by incineration or landfill -Readily capable of being skimmed from the surface of water -Flammable vapors are dramatically reduced or eliminated

Manufacturer: Justrite, Manufacturer Part Number: 14010Nonmetallic Dispensing Cans permit easy, one–hand dispensing of liquids directly onto work surface. Brass dispenser valves are leakproof and self–closing to minimize spills and control excess. Brass valves are FM–approved and recommended for flammables. Rugged high–density polyethylene body is textured and shaped for a firm grip.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-24The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 24" tank depth.

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-27The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 27" tank depth.

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-30The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 30" tank depth.

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-32The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 32" tank depth.

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-36The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 36" tank depth.

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-38The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 38" tank depth.

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-42The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 42" tank depth.

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-44The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 44" tank depth.

Manufacturer: Krueger Sentry, Manufacturer Part Number: H-1.5-45The Therma Type H Liquid Level Indicator is a reliable, swing arm type tank gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Level Indicator Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, HDPE Floats. This gauge comes with 1.5" NPT opening & a 45" tank depth.