$250 to $500

Manufacturer: Haws, Manufacturer Part Number : 6603Model 6603 is a 9" x 9" (22.9 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of stainless steel with a satin finish and includes frame and screws.

Manufacturer: Haws, Manufacturer Part Number : 6603HPSModel 6603HPS is a 9" x 9" (22.9 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of high-polished stainless steel, and includes frame and screws.

Manufacturer: Haws, Manufacturer Part Number : 6608Model 6608 is a 32" x 9" (81.2 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of stainless steel with a satin finish for Model 1011MS.

Manufacturer: Haws, Manufacturer Part Number : 6606Model 6606 is a 15" x 9" (38.1 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of stainless steel with a satin finish, and is made to facilitate maintenance by allowing easier access to plumbing behind the wall. Must be used with MS mounting system option.

Manufacturer: Nochar, Manufacturer Part Number: A660_Acid_Bond_40_LbAcid Bond is a new concept for solidifying acid (water based) liquids. Acid Bond is a dry granular crystal polymer which, unlike traditional baby diaper polymers, will bond and solidify contaminated acid liquid at any pH.Acid Bond is a non–toxic, non–hazardous, non–corrosive, environmentally friendly bonding agent which has passed the most rigid testing for long term burial of acid based liquid waste. Also suitable for incineration, Acid Bond creates less than 2% ash.Acid Bond works by creating a strong mechanical bond with liquid acids, making the waste safer to handle, transport, and dispose of. When solidifying acids or any hazardous liquid, it is recommended that the final waste should be disposed of according to federal, state, and local laws.40 lb. container.SPECIFICATIONS1 container40 lb. container

Manufacturer: UltraTech, Manufacturer Part Number: 758ADA Pads, 2' x 5', Surface Mount (Retrofit) Black: ADA Detectable Warning System (Raised, Truncated Domes) Aids The Visually Impaired. Ultra–ADA Pads are designed for the visually impaired to feel the raised, truncated domes with their feet. This, in combination with the tapping cane, can alert them to a different surface than the surrounding concrete sidewalk and an upcoming intersection. Surface Mount model (Retrofit) installs quickly and easily using adhesive and anchors (included). Better slip resistance than composites. Better impact resistance than composites. 9.5 x 8.5 x 5.25. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 762ADA Pads, 2' x 5', Surface Mount (Retrofit) Brick Red: ADA Detectable Warning System (Raised, Truncated Domes) Aids The Visually Impaired. Ultra–ADA Pads are designed for the visually impaired to feel the raised, truncated domes with their feet. This, in combination with the tapping cane, can alert them to a different surface than the surrounding concrete sidewalk and an upcoming intersection. Surface Mount model (Retrofit) installs quickly and easily using adhesive and anchors (included). Better slip resistance than composites. Better impact resistance than composites. 14 (dia) x 41. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 768ADA Pads, 2' x 5', Surface Mount (Retrofit) Safety Red: ADA Detectable Warning System (Raised, Truncated Domes) Aids The Visually Impaired. Ultra–ADA Pads are designed for the visually impaired to feel the raised, truncated domes with their feet. This, in combination with the tapping cane, can alert them to a different surface than the surrounding concrete sidewalk and an upcoming intersection. Surface Mount model (Retrofit) installs quickly and easily using adhesive and anchors (included). Better slip resistance than composites. Better impact resistance than composites. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Checkers, Manufacturer Part Number: CPRL-1X125-YADA accessibility ramps provide a safer crossing for vehicle and pedestrian traffic while protecting valuable electrical cables and hose lines.

Manufacturer: Checkers, Manufacturer Part Number: CPRL-3GD-DO-YADA accessibility ramps provide a safer crossing for vehicle and pedestrian traffic while protecting valuable electrical cables and hose lines.

Manufacturer: Checkers, Manufacturer Part Number: CPRL-4/5-YADA accessibility ramps provide a safer crossing for vehicle and pedestrian traffic while protecting valuable electrical cables and hose lines.

Manufacturer: Checkers, Manufacturer Part Number: CPRL-5GD-YADA accessibility ramps provide a safer crossing for vehicle and pedestrian traffic while protecting valuable electrical cables and hose lines.

Manufacturer: Morse, Manufacturer Part Number: AP405ADAPTOR TO HANDLE 55–GALLON PLASTIC DRUM WITH OMNI–LIFT DRUM RACKER

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-19ADAPTOR, STAINLESS STEEL, FOR 18.5"– 19" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-20.5ADAPTOR, STAINLESS STEEL, FOR 20"– 20.5" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-22ADAPTOR, STAINLESS STEEL, FOR 21.5"– 22" DIAMETER

Manufacturer: Vestil, Manufacturer Part Number: ADDL-RALSAdditional Roller-Arm Limit Switch.

Manufacturer: FabEnCo, Manufacturer Part Number: A71-16Self–Closing Safety Gates with 12" vertical coverage for Fall Protection and Access Control as Required by OSHA at Ladder, Platform, Stair and Mezzanine Openings; A36 Carbon Steel; Stainless Steel Spring; Zinc Plated Hardware; Hot –Dipped Galvanizing Process; USA Materials and manufactured in Houston Texas. Color: Galvanized Steel. Adjustable from 17" — 18.5".

Manufacturer: FabEnCo, Manufacturer Part Number: XL71-16Self–Closing Safety Gates with 22" vertical coverage for Fall Protection and Access Control as Required by OSHA at Ladder, Platform, Stair and Mezzanine Openings; A36 Carbon Steel; Stainless Steel Spring; Zinc Plated Hardware; Hot –Dipped Galvanizing Process; USA Materials and manufactured in Houston Texas. Color: Galvanized Steel. Adjustable from 17" — 18.5".

Manufacturer: FabEnCo, Manufacturer Part Number: A71-18Self–Closing Safety Gates with 12" vertical coverage for Fall Protection and Access Control as Required by OSHA at Ladder, Platform, Stair and Mezzanine Openings; A36 Carbon Steel; Stainless Steel Spring; Zinc Plated Hardware; Hot –Dipped Galvanizing Process; USA Materials and manufactured in Houston Texas. Color: Galvanized Steel. Adjustable from 19" — 21.5".

Manufacturer: FabEnCo, Manufacturer Part Number: XL71-18Self–Closing Safety Gates with 22" vertical coverage for Fall Protection and Access Control as Required by OSHA at Ladder, Platform, Stair and Mezzanine Openings; A36 Carbon Steel; Stainless Steel Spring; Zinc Plated Hardware; Hot –Dipped Galvanizing Process; USA Materials and manufactured in Houston Texas. Color: Galvanized Steel. Adjustable from 19" — 21.5".

Manufacturer: FabEnCo, Manufacturer Part Number: A71-21Self–Closing Safety Gates with 12" vertical coverage for Fall Protection and Access Control as Required by OSHA at Ladder, Platform, Stair and Mezzanine Openings; A36 Carbon Steel; Stainless Steel Spring; Zinc Plated Hardware; Hot –Dipped Galvanizing Process; USA Materials and manufactured in Houston Texas. Color: Galvanized Steel. Adjustable from 22" — 24.5".

Manufacturer: FabEnCo, Manufacturer Part Number: XL71-21Self–Closing Safety Gates with 22" vertical coverage for Fall Protection and Access Control as Required by OSHA at Ladder, Platform, Stair and Mezzanine Openings; A36 Carbon Steel; Stainless Steel Spring; Zinc Plated Hardware; Hot –Dipped Galvanizing Process; USA Materials and manufactured in Houston Texas. Color: Galvanized Steel. Adjustable from 22" — 24.5".

Manufacturer: FabEnCo, Manufacturer Part Number: A71-24Self–Closing Safety Gates with 12" vertical coverage for Fall Protection and Access Control as Required by OSHA at Ladder, Platform, Stair and Mezzanine Openings; A36 Carbon Steel; Stainless Steel Spring; Zinc Plated Hardware; Hot –Dipped Galvanizing Process; USA Materials and manufactured in Houston Texas. Color: Galvanized Steel. Adjustable from 25" — 27.5".