$250 to $500

Manufacturer: Enpac, Manufacturer Part Number: 4730-BKMAINTENANCE BLANKET – The ENPAC Maintenance Blanket is designed to be utilized under vehicles or leaking equipment. The blanket is made of 8–oz. non–woven geo–textile material, that is 100–mils thick, backed by 1 layer of 20–mil fuel/chemical resistant polyethylene. The blanket provides a protective sorbent pad between the maintenance item (usually a road grader blade) and the placement area. The fabric backing provides an extra barrier that, if not punctured, stops any hydrocarbon from getting to the ground. The blanket can be rolled or folded into a compact lightweight unit. It is an inexpensive alternative to heavy/costlier fabric mats.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Peabody Engineering, Manufacturer Part Number : 01-31867BHDurable, polyethylene tanks for Potable Water, Hydroponics and Agricultural Tanks applications in your choice of 100% virgin FDA Resin in Natural, Green, Black or Dark Gray. All of ProChem® storage tanks are certified NSF/ANSI/CAN 61 by ALS Laboratories for purity and for the safe storage of drinking water and UV rated for up to 20 years in direct sunlight. Sizes from 25 to 1500 gallons are equipped with a threaded plastic access opening secured to your tank with a lanyard and are vented to atmosphere, they also come with either 1 or 2 Bulkhead Fittings depending on size of tanks ordered.Product Measurement: Dia 27" x Hgt 47.75" Fitting Size: T=Top / B=Bottom = T 3/4” / B 1.5”

Manufacturer: Peabody Engineering, Manufacturer Part Number : 01-35399BHDurable, polyethylene tanks for Potable Water, Hydroponics and Agricultural Tanks applications in your choice of 100% virgin FDA Resin in Natural, Green, Black or Dark Gray. All of ProChem® storage tanks are certified NSF/ANSI/CAN 61 by ALS Laboratories for purity and for the safe storage of drinking water and UV rated for up to 20 years in direct sunlight. Sizes from 25 to 1500 gallons are equipped with a threaded plastic access opening secured to your tank with a lanyard and are vented to atmosphere, they also come with either 1 or 2 Bulkhead Fittings depending on size of tanks ordered.Product Measurement: Dia 27" x Hgt 47.75" Fitting Size: T=Top / B=Bottom = T 3/4” / B 1.5”

Manufacturer: Peabody Engineering, Manufacturer Part Number : 01-34931BHDurable, polyethylene tanks for Potable Water, Hydroponics and Agricultural Tanks applications in your choice of 100% virgin FDA Resin in Natural, Green, Black or Dark Gray. All of ProChem® storage tanks are certified NSF/ANSI/CAN 61 by ALS Laboratories for purity and for the safe storage of drinking water and UV rated for up to 20 years in direct sunlight. Sizes from 25 to 1500 gallons are equipped with a threaded plastic access opening secured to your tank with a lanyard and are vented to atmosphere, they also come with either 1 or 2 Bulkhead Fittings depending on size of tanks ordered.Product Measurement: Dia 27" x Hgt 47.75" Fitting Size: T=Top / B=Bottom = T 3/4” / B 1.5”

Manufacturer: Peabody Engineering, Manufacturer Part Number : 01-34028BHDurable, polyethylene tanks for Potable Water, Hydroponics and Agricultural Tanks applications in your choice of 100% virgin FDA Resin in Natural, Green, Black or Dark Gray. All of ProChem® storage tanks are certified NSF/ANSI/CAN 61 by ALS Laboratories for purity and for the safe storage of drinking water and UV rated for up to 20 years in direct sunlight. Sizes from 25 to 1500 gallons are equipped with a threaded plastic access opening secured to your tank with a lanyard and are vented to atmosphere, they also come with either 1 or 2 Bulkhead Fittings depending on size of tanks ordered.Product Measurement: Dia 27" x Hgt 47.75" Fitting Size: T=Top / B=Bottom = T 3/4” / B 1.5”

Manufacturer: Peabody Engineering, Manufacturer Part Number: 01-31867ProChem® Potable Water Polyethylene Tanks include an integrally molded pump mounting platform on top and standard process fittings for fill and discharge of water. Supplied with a large vented access opening and easy to read calibration in liters and gallons, the ProChem® Potable Water Tank offers standard features not previously available. ProChem® Potable Tanks are molded with FDA approved material and rated for 1.0 Specific Gravity – Water Only.Dia 27" x Hgt 47.75" w/Twist Lid 8"

Manufacturer: Peabody Engineering, Manufacturer Part Number: 01-34028ProChem® Potable Water Polyethylene Tanks include an integrally molded pump mounting platform on top and standard process fittings for fill and discharge of water. Supplied with a large vented access opening and easy to read calibration in liters and gallons, the ProChem® Potable Water Tank offers standard features not previously available. ProChem® Potable Tanks are molded with FDA approved material and rated for 1.0 Specific Gravity – Water Only.Dia 27" x Hgt 47.75" w/Twist Lid 8"

Manufacturer: Peabody Engineering, Manufacturer Part Number: 01-31274ProChem® Process Chemical Tanks are designed for agricultural and industrial chemical applications where a single-walled design is desired. Most Tanks include an integrally molded pump mounting platform on top and standard process fittings for fill and discharge of chemicals, water or food products. Supplied with a vented access opening and easy to read calibration in liters and gallons, the ProChem® Tanks offers standard features not previously available anywhere. Tanks made from LPE are available NSF/ANSI/CAN 61 Certified. XLPE NSF/ANSI/CAN 61 Certified from 40 gallons up.Dia 27" x Hgt 47.75" w/Twist Lid 8"

Manufacturer: Peabody Engineering, Manufacturer Part Number: 01-31264ProChem® Process Chemical Tanks are designed for agricultural and industrial chemical applications where a single-walled design is desired. Most Tanks include an integrally molded pump mounting platform on top and standard process fittings for fill and discharge of chemicals, water or food products. Supplied with a vented access opening and easy to read calibration in liters and gallons, the ProChem® Tanks offers standard features not previously available anywhere. Tanks made from LPE are available NSF/ANSI/CAN 61 Certified. XLPE NSF/ANSI/CAN 61 Certified from 40 gallons up.Dia 27" x Hgt 47.75" w/Twist Lid 8"

Manufacturer: Peabody Engineering, Manufacturer Part Number : 01-31274BHProChem® Vertical Tanks w/Bulkhead Fittings are designed for agricultural and industrial chemical applications where a single-walled design is desired. Most tanks include an integrally molded pump mounting platform on top and standard process fittings for fill and discharge of chemicals, water or food products. Tank also has Bulkhead Fittings at the top and bottom of the tank depending on tank size. Supplied with a vented access opening and easy to read calibration in liters and gallons, the ProChem® Vertical Tanks offers standard features not previously available anywhere. Tanks made from LPE are available NSF/ANSI/CAN 61 Certified.Product Measurement: Dia 27" x Hgt 47.75" Fitting Size: T=Top / B=Bottom = T 3/4” / B 1.5”

Manufacturer: Peabody Engineering, Manufacturer Part Number: 01-28967Cylindrical High Density Polyethylene open top tanks come standard with Dust Cover style lids. All tanks are standard natural polyethylene. Tanks are available in blue, black, or yellow for 10% adder. Flat side of wall with molded in calibration charts for quick level indication available on tanks that come standard with lid. Black lettering is available on these tanks at an additional charge. Tank diameter is of bottom cylinder, not overall lid dimension; height is from floor to top of lid. Open Top Tanks with HDLPE construction are Certified NSF/ANSI 61 Compliant. Mfg. Part#: 01-28967

Manufacturer: Durham, Manufacturer Part Number: 740-9512" deep, steel, 104 opening bin, for small part storage, color: gray Mfg Part#: 740-95

Manufacturer: Vestil, Manufacturer Part Number: SQ-108Rigid Section without Toeboard – Square Tube (O.D.): 1–5/8", Overall Height: 42", Mid–rail Height: 21", Length: 108" – Steel Square Safety Handrail – An economical way to protect people and machinery. Applications include loading docks, floor openings, walkways, and mezzanines. Highly visible safety yellow powder coat finish.

Manufacturer: Vestil, Manufacturer Part Number: SQ-108-TBRigid Section with Toeboard – Square Tube (O.D.): 1–5/8", Overall Height: 42", Mid–rail Height: 21", Length: 108" – Steel Square Safety Handrail – An economical way to protect people and machinery. Applications include loading docks, floor openings, walkways, and mezzanines. Highly visible safety yellow powder coat finish.

Manufacturer: Skolnik, Manufacturer Part Number: HM11001For Safe Transportation of Hazardous Waste For the safe and secure way to store or transport a wide range of materials. These open–head primary and Overpack containers, made of high–quality carbon steel, meet UN Structural Testing requirements and feature an optional corrosion–resistant lining of epoxy–phenolic. Painted bright yellow with a red cover, these easy–to–recognize drums come in every size you need: from 8 to 110 gallon capacities and range from 1.5mm to 0.9mm metal thickness combinations. Helps you comply with 49 CFR 173.3(c). Leverlock closures are available upon request. SPECIFICATIONS1A2/X409/S - 100 lbs.1 drum16/16/16 Gauge Steel

Manufacturer: Durham, Manufacturer Part Number: 745-9512" deep, steel, 112 opening bin, for small part storage, color: gray Mfg Part#: 745-95

Manufacturer: Eagle, Manufacturer Part Number: M12CRA12 gallon Modular Quik–Assembly Poly Cabinet, Modular, 1 Door, 2 Shelves – Blue.

Manufacturer: Little Giant, Manufacturer Part Number: SHLF-3059Shelf 12 gauge 30 In. x 59 In. For use with Adjustable Shelf Storage lockers In Use Height 1-1/2 In. Construction 12 ga Steel Powder Coated Finish Includes Shelf and 4 each support clips.

Manufacturer: Exair, Manufacturer Part Number : 110012The EXAIR 12" Aluminum Super Air Knife provides a uniform laminar sheet of airflow for cleaning, cooling, or drying surfaces. Stock, .002" thick polyester shim included.

Manufacturer: Eagle, Manufacturer Part Number: 1712AFFORDABLE PROTECTION. Eagle® Column Protectors provide affordable protection for warehouse and factory columns, corners, posts and beams. Absorbs impact from tow motors, minimizing column, fork truck and personnel damage and injury. Blow–molded of high density polyethylene, providing excellent cold impact and chemical resistance. Fits all types of columns. Additional colors available – call us for details. Rounded design improves deflection of impact Stackable for added height protection Easy installation – 2 nylon belts with Velcro® fasteners Weather–Proof material with UV protection Fits all types of columns (H–beam, I–beam, square and round) SPECIFICATIONS40 lbs.1 12" column protector24" Dia. x 42" H

Manufacturer: Eagle, Manufacturer Part Number: 1712LM 12" Column Protector, Lime w/Reflective Bands

Manufacturer: Eagle, Manufacturer Part Number: 1712OR 12" Column Protector, Orange w/Reflective Bands

Manufacturer: Little Giant, Manufacturer Part Number: TF-220-10FF12" Deep x 14" Wide reinforced nose plate - safety handles larger, bulky loads.

Manufacturer: Little Giant, Manufacturer Part Number: TF-240-10FF12" Deep x 14" Wide reinforced nose plate - safety handles larger, bulky loads.