$250 to $500

Manufacturer: UltraTech, Manufacturer Part Number: 9576Capture Hazardous Spills From Railroad Tanker Cars. Ultra–TrackPans have been designed to provide spill containment at railroad sidings and locomotive maintenance facilities. Available in virtually any length, Ultra–TrackPans may be used to collect incidental spills and drips OR to capture and channel off significant spills caused by defective equipment or a major overflow. Center Track Pans fit between the rails while Side Track Pans fit on either side of the rails, providing complete spill coverage and containment. All pans are connected "end to end" with bulkhead fittings, allowing spills to flow from one pan to the next. Containment capacity is increased as the spill travels from TrackPan to TrackPan. Unlike carbon steel track pans, Ultra–TrackPans will not rust or corrode. Their polyethylene construction features a UV inhibitor that resists the degrading effects of the sun. These lightweight TrackPans can be easily installed without heavy lifting equipment. Minimal tools and labor are required. Track Pan Grates allow spills to flow below to the Track Pans while providing a level surface for walking or performing maintenance and repairs. Track Pan Covers are designed to work with the Track Pan Grates to shelter the Track Pans from rain and other elements. The Polyethylene Covers are left in place until the railcar(s) arrive to be off–loaded or loaded. Lightweight covers mechanically lock into the polyethylene grates and will not blow off in windy conditions. Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily. Prevent Costly Cleanup and Regulatory Fines Modular Design – Center and Side Pans are 53" long; containment areas can be conveniently assembled to any length desired All–Polyethylene Construction – Rugged TrackPans withstand harsh chemicals and are designed to function in temperatures ranging from –40°F to +140°F Economical and easy to install Meets New York State Chemical Bulk Storage Regulation Section 599.17C – Secondary Containment for Transfer Stations SPECIFICATIONS19 gal. Sump Capacity - 60 lbs.1 side track pan, 1 bulkhead fitting, 1 piece treated lumber, 2 gaskets, 1 grate53.5" L x 27.5" W x 6" H

Manufacturer: UltraTech, Manufacturer Part Number: 3000800Used with Ultra Spill King–Flat Deck Pallet Only.

Manufacturer: UltraTech, Manufacturer Part Number: 1320The Low–Profile Containment Decks Designed for COMPLIANCE! Staying in compliance has never been easier. These low–profile SpillDecks sit a mere 5 3/4" off the ground, making loading and unloading a simple task. Made of chemical–resistant polyethylene so they won't rust or corrode. The unique bladder technology allows the internal sump to catch small leaks and spills without deploying the bladder. In case of larger spills, the heavy–duty bladder unfurls to contain the spill and can be drained with our optional Bladder Pump. Units can be connected or with our regular SpillDecks for expanded storage and containment capacity. 1, 2 and 4–Drum Modules Low–Profile – only 5 3/4" high Bulkhead Fittings and T–Strips allow multiple units to be joined Helps comply with 40 CFR 264.175 requirements Mix and Match with our regular SpillDecks SPECIFICATIONS1,500 lbs. Load Bearing Capacity, 66 gal. Sump Capacity - 27 lbs.1 deck30.5" L x 25.75" W x 5.75" H

The Spill Deck Flexible Model P2 Bladder System provides a versatile spill containment solution with a low-profile, space-saving design engineered for efficient storage and rapid deployment. Developed for industrial and commercial environments, this system minimizes storage space while still providing strong protection against both accidental leaks and catastrophic spills. With an automatic bladder deployment that adds 66 gallons of extra capacity, it offers an added layer of safety precisely when it's needed most.Key Features Space-efficient design that breaks down into smaller components for easy storage and reduced shipping costs. Durable heavy-duty 18.5 oz PVC outer sump that can be folded or rolled up for convenient storage. Automatic bladder deployment (66 gallons capacity) to enhance spill containment during emergencies. Modular connectivity with optional Bulkhead Fittings, enabling you to configure custom spill containment areas. Quick assembly for immediate use in critical situations. Compliance and Specifications Complies with SPCC, EPA Container Storage Regulation (40 CFR 264.175), and UFC Spill Containment Regulations. Manufacturer: UltraTech Manufacturer Part Number: 1361 Designed for safe drum loading and efficient operational performance. Experience a high-performance spill response system designed to protect your facility. For a complete spill containment solution, explore our range in the Spill Containment Decks collection. Choose the technology that provides reliable, compliant, and convenient spill management every time.

Manufacturer: UltraTech, Manufacturer Part Number: 1360Low Profile, Low Cost Spill Containment Helps Meet Regulations — Takes Up Minimal Storage/Shipping Space Functions like other spill decks / platforms but disassembles into smaller components when not in use – saves valuable storage space and shipping costs. Outer yellow sump is constructed of heavy–duty, 18.5 oz. PVC material – folds/ rolls down easily for convenient storage. Decks can be connected with optional Bulkhead Fittings to create a custom spill containment area. Incidental spill and leaks are contained within the sump. In the case of a catastrophic spill, the bladder (included with Spill Deck Bladder System Model) will automatically deploy providing an additional 66 gallons of capacity. Polyethylene grating is easily removed for quick clean–up. Quick and easy to assemble. Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175, and UFC Spill Containment Regulations.

Engineered for efficiency, this low-profile spill containment solution is designed for industrial and commercial environments. The UltraTech P4 model delivers a dependable spill deck bladder system that maximizes storage and shipping space—all while providing robust spill management. Its innovative design features a flexible bladder system that automatically deploys during a catastrophic event, instantly adding 66 gallons of capacity for additional protection.Key Features & Benefits Proven spill containment bladder that complies with SPCC, EPA Container Storage Regulation 40 CFR 264.175, and UFC Spill Containment Regulations. Durable 18.5 oz. PVC outer yellow sump that folds and rolls down easily for convenient storage. Modular design: Decks disassemble into smaller components and connect with optional Bulkhead Fittings to create a custom spill containment area. Immediately contains incidental spills within the sump, while the integrated bladder system addresses larger spills. Quick and easy assembly minimizes downtime and supports effective industrial spill response. Technical & Application InsightsManufactured by UltraTech (Manufacturer Part Number: 1362), this spill containment solution is built with safety and durability in mind. Ideal for manufacturing, construction, oil and gas, and environmental services, its versatile design meets a wide range of spill management needs. Explore additional UltraTech products on the UltraTech collection for more spill response solutions.Experience reliable spill response with a system that combines smart design and strict compliance for ultimate peace of mind.

Manufacturer: UltraTech, Manufacturer Part Number: 2360Spill Deck, InLine – 3–Drum Model: Low Profile, "In Line" Designs Save Valuable Floor Space And Comply With Spill Containment Regulations! Standard InLine Models include 3–drum, 4–drum, 5–drum and 6–drum configurations. Narrow 25 7/8" depth allows drums to be stored in a single row along facility walls – minimizes space requirements. Low profile design reduces safety and handling concerns found with taller containment pallets. Additional Spill Deck modules can be easily connected to an existing InLine configuration – allows more drums to be added to your containment area as storage needs grow. Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175 and UFC Spill Containment Regulations. 48 x 40 x 40. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 2353Spill Deck Plus Loading Ramp, Steel: Drive equipment onto the low profile (4 1/4 high) Spill Decks by using the steel load ramp. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 1352Low Profile, Low Cost Spill Containment Helps Meet Regulations — Takes Up Minimal Storage/Shipping Space Functions like other spill decks / platforms but disassembles into smaller components when not in use – saves valuable storage space and shipping costs. Outer yellow sump is constructed of heavy–duty, 18.5 oz. PVC material – folds/ rolls down easily for convenient storage. Decks can be connected with optional Bulkhead Fittings to create a custom spill containment area. Incidental spill and leaks are contained within the sump. In the case of a catastrophic spill, the bladder (included with Spill Deck Bladder System Model) will automatically deploy providing an additional 66 gallons of capacity. Polyethylene grating is easily removed for quick clean–up. Quick and easy to assemble. Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175, and UFC Spill Containment Regulations.

Manufacturer: UltraTech, Manufacturer Part Number: 3000802Spill King Basin Only.

Manufacturer: UltraTech, Manufacturer Part Number: 9607Spill Pallet P1 Plus, With Drain: Combine High–Strength And Low–Profile Features While Meeting EPA Container Storage Regulations. Low profile positions drum funnels below eye level – significantly reduces the potential for hazardous fluids to splash into the eyes or face. Nearly 50% lower than standard spill pallets, drum handling is safer and less strenuous. Forkliftable, all–polyethylene construction. Removable grates feature a non–slip surface. Available in 1, 2, 3 and 4–drum configurations. Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175 and UFC Spill Containment Regulations. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 1010Spill Pallet P2, No Drain, Yellow: SpillPallets Are Built For Heavy Loads And Convenient Handling. High Load Capacity: 6,000 lbs. for 4–Drum Model, 3,000 lbs. for 2–Drum Model. Bright, Safety Yellow Sidewalls are translucent, offering convenient visual leak detection. 100% Polyethylene Construction compatible with a broad range of chemicals, including acids and corrosives. Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175 and UFC Spill Containment Regulations. 53 x 29 x 16.5. Sump capacity is 66 gallons. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 1011Spill Pallet P2, With Drain, Yellow: SpillPallets Are Built For Heavy Loads And Convenient Handling. High Load Capacity: 6,000 lbs. for 4–Drum Model, 3,000 lbs. for 2–Drum Model. Bright, Safety Yellow Sidewalls are translucent, offering convenient visual leak detection. 100% Polyethylene Construction compatible with a broad range of chemicals, including acids and corrosives. Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175 and UFC Spill Containment Regulations. 53 x 29 x 16.5. Sump capacity is 66 gallons. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 1113Spill Pallet P4 Economy Model with Drain, Black: With the advent of global markets, the business world has never been more competitive. Ultra–Spill Pallet Economy Models have been developed specifically to meet tight budgets for spill containment products. Model with Drain. 53 x 53 x 11.75, 66 gal. sump capacity, 3,000 lbs. UDL.

Manufacturer: UltraTech, Manufacturer Part Number: 1000Spill Pallet P4, No Drain, Yellow: SpillPallets Are Built For Heavy Loads And Convenient Handling. High Load Capacity: 6,000 lbs. for 4–Drum Model, 3,000 lbs. for 2–Drum Model. Bright, Safety Yellow Sidewalls are translucent, offering convenient visual leak detection. 100% Polyethylene Construction compatible with a broad range of chemicals, including acids and corrosives. Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175 and UFC Spill Containment Regulations. 53 x 53 x 11.75. Sump capacity is 66 gallons. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

The UltraTech SpillBerm Case is an innovative solution designed for quick, temporary spill containment and sealing off doorways or vehicle areas during washdowns. Manufactured by UltraTech (Part Number: 2104), this product offers versatility and ease of repositioning, making it ideal for industrial and commercial settings that require reliable spill response. The case features a flexible, reusable design that adapts to various surfaces, ensuring that even awkward shapes or corners can be effectively contained.Key Features Reusable, non-absorbent design for multiple spill emergencies Unique urethane material that seeps into cracks and crevices to create a tight seal Extremely flexible construction that bends and conforms to irregular surfaces Durable connectors allow multiple berms to be joined, forming continuous barriers Easily trimmed to custom lengths for a tailored application Applications Temporary Spill Response: Quickly contain spills on smooth or rough surfaces before cleanup. Door and Entryway Sealing: Secure doorways during washdowns to prevent water or chemical leaks. Vehicle Spill Management: Arrange berms around vehicles for secondary containment in transit areas. Specifications Weight: 3 lbs. Includes 1 carrying case for convenient storage and transport. Recommended routine inspections ensure continued material integrity under various environmental conditions. Discover more spill response and containment solutions in our UltraTech collection or explore similar products in our Spill Berms collection.

Manufacturer: UltraTech, Manufacturer Part Number: 2222How LOW can you go? Meet the lowest and toughest poly SpillDeck on the market! Ultra SpillDeck Plus has an amazingly low 4 1/4" profile that makes loading and unloading a cinch. And talk about tough...how's 10,000 lbs./sq. ft. sound? Great for mounting machinery to contain leaking oil, hydraulic fluid and more. Drive equipment onto the low profile SpillDecks and capture fluids that may leak during routine maintenance and repair operations. Also great for drums and much more. 2 and 4–Drum modules can be connected together with bulkhead fittings to increase overall surface area and sump capacity. Super–Low 4 1/4" Profile Modules can be joined together Superior weight capacity – 10,000 lbs./sq. ft. Optional Adjustable Steel Ramp available Excellent choice for heavy machinery and equipment Helps comply with 40 CFR 264.175 SPECIFICATIONS10,000 lbs./sq. ft. Load Bearing Capacity, 17.5 gal. Sump Capacity - 56 lbs.1 deck27.25" L x 54.5" W x 4.25" H

Manufacturer: UltraTech, Manufacturer Part Number: 2810 Our Ultra–275 Containment Sump PullOver Cover keeps rainwater out of the Ultra–275 Containment Sump, yet allows easy access to the sump. SPECIFICATIONS11 lbs.1 cover

The innovative UltraTech containment berm is engineered for exceptional durability and versatility in spill response applications. Its modular design allows you to configure containment areas to any size, making it an ideal solution for job sites that require drive-in/drive-out capabilities. Designed with industrial applications in mind, this berm offers unmatched reliability for facilities in manufacturing, construction, and environmental services. With robust polymer-coated foam support blocks and slip-resistant PVC, this product meets critical safety standards while minimizing setup time.Key Features Flexible modular construction for custom configuration sizes Polymer-coated foam support blocks in 6′ lengths provide strong, drive-over resilient sidewall support Triangular foam blocks with precise dimensions (72″ L x 18″ W x 6″ H) paired with molded-in rebar slots (rebar not included) Standard material options of 38 mil and 54 mil slip-resistant PVC, with alternative materials available upon request Ultra robust and resilient spill containment designed for heavy machinery and high-traffic work sites Benefits & ComplianceThis spill berm meets EPA 40 CFR 264.175 requirements and complies with the Spill Prevention, Control, and Countermeasure (SPCC) Act, ensuring your site remains secure and safe without the need for extensive setup. Designed for efficiency and ease of use, it offers peace of mind that your spill management solution is both reliable and cost-effective.For more industrial safety products, explore our UltraTech collection or browse our Containment Berms.

Manufacturer: UltraTech, Manufacturer Part Number: 2124 Stop Spills From Going Down The Drain. Ultra–DrainSeals are a dependable choice for keeping spills out of drains. Flexible, non–absorbing material has reinforced, tear–resistant mesh “sandwiched” between layers of polyurethane for added durability and resistance to tearing. There is no specified “top” or “bottom” so both sides will quickly seal drains. For best results, choose a seal that is 6” larger than the drain opening. WallMount Holder is made of chemical–resistant polyethylene with velcro straps that allow quick and easy access. Features a non–slip handle and mounting hardware for “grab and go” response. Prevents contaminants from entering drains Resists oil, water and most chemicals – cleans with soap and water Both sides will seal drains – no specified “top” or “bottom” Flexible urethane construction molds to uneven surfaces creating a temporary seal Optional WallMount Holder stores and protects drain seal SPECIFICATIONS16 lbs18"L x 58"W x 3/8"H

Manufacturer: UltraTech, Manufacturer Part Number: 2131 Stop Spills From Going Down The Drain. Ultra–DrainSeals are a dependable choice for keeping spills out of drains. Flexible, non–absorbing material has reinforced, tear–resistant mesh “sandwiched” between layers of polyurethane for added durability and resistance to tearing. There is no specified “top” or “bottom” so both sides will quickly seal drains. For best results, choose a seal that is 6” larger than the drain opening. WallMount Holder is made of chemical–resistant polyethylene with velcro straps that allow quick and easy access. Features a non–slip handle and mounting hardware for “grab and go” response. Prevents contaminants from entering drains Resists oil, water and most chemicals – cleans with soap and water Both sides will seal drains – no specified “top” or “bottom” Flexible urethane construction molds to uneven surfaces creating a temporary seal Optional WallMount Holder stores and protects drain seal SPECIFICATIONS27 lbs42"L x 42"W x 3/8"H

Manufacturer: UltraTech, Manufacturer Part Number: 2160 Durable Drain Protection That Stands Up To Traffic! Finally, drain protection that stands up to everyday abuse and traffic. UltraDrainSeals Plus meet the demands of rigorous daily use. Unique design provides drain protection that can be driven over and can withstand the elements. For best results, choose a seal that is 6" larger than the drain opening. Duallayer DrainSeal Plus provides rugged and durable drain protection from spills Bottom urethane layer is pliable to allow pad to deform and seal off drain Top layer provides heavyduty protection from vehicular traffic and UV degradation Numerous square, rectangular and circular sizes available PLUS custom sizes to meet most applications SPECIFICATIONS16 lbs36"L x 36"W

Manufacturer: UltraTech, Manufacturer Part Number: 861Utility Box, 15 cubic foot capacity, no wheels, Safety Orange: Versatile UtilityBox Can Be Used For SpillKits, Storage Bins and Much More! Large, 15 cu. ft. capacity. Forkliftable and lockable. Heavy–duty, double–walled lid is sloped to shed rain. Optional casters available. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 2386Polyethylene Drum Racks Capture Spills, Keep Your Workplace Clean And Safe Ultra–Drum Rack Containment Systems offer a safe and environmentally sound means of dispensing from 55 gallon, horizontal drums. Available in 1,2 and 4–drum configurations, the all–polyethylene designs eliminate rust and corrosion commonly found with metal drum racks. All models meet EPA Container Storage Regulation 40 CFR 264.175 and Uniform Fire Code Spill Containment Regulations. Ultra–Drum Rack Systems improve worker safety by keeping slippery chemicals and oils off the plant floor.