$250 to $500

Manufacturer: Little Giant, Manufacturer Part Number: WST1-3048-AHSmooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Angle iron cross braces are centered to allow leg room on both sides. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Capacity: 5,000–lbs. Dimensions: 30" x 48".

Manufacturer: Little Giant, Manufacturer Part Number: WST2-2448-AHSmooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Half depth 12 gauge lower shelf with lip at rear provides room for additional storage while leaving ample room for legs when seated. Capacity 500 lbs. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Capacity: 5,000–lbs. Dimensions: 24" x 48".

Manufacturer: Little Giant, Manufacturer Part Number: AFS-3640-6PHSlotted uprights will accept Trays, Shelves and Pegboard Panels that can be combined and adjusted in a wide variety of ways. Welded construction with 2 swivel, 2 rigid 6" phenolic casters, and powder coated finish. Capacity: 2,000–lbs. Single–sided Truck is 40" x 36" x 67".

Manufacturer: Little Giant, Manufacturer Part Number: AFS-2440-6PHSlotted uprights will accept Trays, Shelves and Pegboard Panels that can be combined and adjusted in a wide variety of ways. Welded construction with 2 swivel, 2 rigid 6" phenolic casters, and powder coated finish. Capacity: 2,000–lbs. Single–sided Truck is 40" x 24" x 67".

Manufacturer: Little Giant, Manufacturer Part Number: TB-1Carries a variety of loads, including lumber, tool boxes, and pipe up to 20" diameter. Extra large 16" pneumatic wheels with roller bearings and 4 ply tires roll over the roughest surfaces. Carrier bed is constructed of 3/16" plate and measures 30" long x 12" x 12". Offset “T" handle allows for 2 hand grip and greater control of load. Capacity: 1,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WT-2424-3RThese 1–3/4" thick butcher block tops have a two–coat catalyzed varnish finish, and are attached to an all–welded, angle steel frame for unmatched rigidity and strength. The impact resistant, hardwood tops are non–conductive, resist damage from heavy blows, and provide an extremely durable, yet “forgiving" work surface. All models are fully assembled and ready for immediate use. Comes with 3" x 1–1/4" hard rubber casters with wheel brakes 35" high. Dimensions: 24" x 24".

Manufacturer: Little Giant, Manufacturer Part Number: WTS-2424-3RThese 1–3/4" thick butcher block tops have a two–coat catalyzed varnish finish, and are attached to an all–welded, angle steel frame for unmatched rigidity and strength. The impact resistant, hardwood tops are non–conductive, resist damage from heavy blows, and provide an extremely durable, yet “forgiving" work surface. All models are fully assembled and ready for immediate use. Comes with 3" x 1–1/4" hard rubber casters with wheel brakes 35" high and a 12 gauge lower shelf. Dimensions: 24" x 24".

Manufacturer: Little Giant, Manufacturer Part Number: WT-2424-LLThese 1–3/4" thick butcher block tops have a two–coat catalyzed varnish finish, and are attached to an all–welded, angle steel frame for unmatched rigidity and strength. The impact resistant, hardwood tops are non–conductive, resist damage from heavy blows, and provide an extremely durable, yet “forgiving" work surface. All models are fully assembled and ready for immediate use. Comes with leg levelers adjustable from 32" to 35" high. Dimensions: 24" x 24".

Manufacturer: Little Giant, Manufacturer Part Number: WT-2436-LLThese 1–3/4" thick butcher block tops have a two–coat catalyzed varnish finish, and are attached to an all–welded, angle steel frame for unmatched rigidity and strength. The impact resistant, hardwood tops are non–conductive, resist damage from heavy blows, and provide an extremely durable, yet “forgiving" work surface. All models are fully assembled and ready for immediate use. Comes with leg levelers adjustable from 32" to 35" high. Dimensions: 24" x 36".

Manufacturer: Little Giant, Manufacturer Part Number: WTS-2424-LLThese 1–3/4" thick butcher block tops have a two–coat catalyzed varnish finish, and are attached to an all–welded, angle steel frame for unmatched rigidity and strength. The impact resistant, hardwood tops are non–conductive, resist damage from heavy blows, and provide an extremely durable, yet “forgiving" work surface. All models are fully assembled and ready for immediate use. Comes with leg levelers adjustable from 32" to 35" high and a 12 gauge lower shelf. Dimensions: 24" x 24".

Engineered for safe and efficient handling of single cylinders, the Little Giant Cylinder Cart provides superior stability and reliable performance in demanding industrial environments. Its strong design and high-quality construction make it an essential tool for streamlined material handling and improved workplace safety.Key Specifications• 1.05" O.D. Tubing – Delivers excellent strength and durability• Nose Plate – Measures 8" deep x 14" wide for added stability• Support Chain – Securely welded to the frame to keep the cylinder firmly in place• Flat-Free Wheel – 10" x 3.5" design ensures smooth and consistent mobilityEngineering & Durability BenefitsBuilt with precise engineering and meticulous attention to detail, this cylinder cart features a securely welded support chain and rugged tubing capable of withstanding heavy-duty use. Its robust construction enhances safety by reducing the risk of cylinder slippage during transport, fostering a more efficient work environment.Ideal ApplicationsIdeal for industrial settings in manufacturing, construction, oil and gas, and environmental services, this cart simplifies the handling of single cylinders while minimizing downtime. Its user-focused design and dependable performance make it a trusted choice for professionals who require top-quality material handling solutions.Upgrade your operations with proven engineering and dependable performance. Discover more quality solutions in our Little Giant collection to meet all your material handling needs.

Manufactured by Little Giant – Part Number TWFF-42-10P, this gas cylinder hand truck is engineered for safe, efficient cylinder transport in demanding industrial environments. Designed with durability and ease of use in mind, it features robust 1.05″ O.D. steel tubing and a dual-handle design that enhances control and maneuverability.Key Features Durable Construction: Built with 1.05″ O.D. steel tubing, ensuring lasting strength and reliability. Optimized Design: Dual handles provide superior control for smooth cylinder movement. Precision Dimensions: Nose plate measures 8″ deep by 14″ wide; overall height is 47″. Versatile Wheels: Equipped with semi-pneumatic or pneumatic wheels for adaptable performance on various surfaces. Enhanced Safety: A securely welded support chain holds the cylinder firmly in place, with an optional folding foot kick feature for extra leverage during loading and unloading. Compact & Lightweight: Approximate dimensions of 19.5″ (L) x 22″ (W) and a weight of 37 lbs offer practical mobility and space efficiency. This Little Giant Cylinder Cart delivers reliability and safety for industrial gas cylinder handling. Its thoughtful engineering meets rigorous standards, making it a dependable solution for material handling and operational compliance. Explore more Little Giant products in our Little Giant collection for additional industrial safety and transport solutions.

Manufacturer: Little Giant, Manufacturer Part Number: ERBST-2424-6PHErgonomic 20" Bed Height – Less bending means easier loading and unloading, and keeps material closer to most machine heights. Highly Maneuverable – Four swivel casters with 6" hard tread phenolic wheels allow movement in any direction. Useful in tight work areas with long loads and when moving around corners. 3000 lbs. Capacity Each – Use for both transport and storage. Combine multiple units for greater capacity and to support longer loads. Loads on single units must be centered on truck. Cradle Interior Dimensions: 21" x 14".

Manufacturer: Little Giant, Manufacturer Part Number: RP3X-1832-5PYRaised 12 gauge steel platform is 20" high to help minimize bending. Three 3/4" expanded metal sides extend 20" high above the deck to help contain those big loads and small parts. All–welded construction ships fully assembled and ready for immediate use. 2 swivel, 2 rigid casters with 5" non–marking polyurethane wheels. Capacity: 1,200–lbs. Dimensions: 18" x 32".

Manufacturer: Little Giant, Manufacturer Part Number: RP3X-2436-5PYRaised 12 gauge steel platform is 20" high to help minimize bending. Three 3/4" expanded metal sides extend 20" high above the deck to help contain those big loads and small parts. All–welded construction ships fully assembled and ready for immediate use. 2 swivel, 2 rigid casters with 5" non–marking polyurethane wheels. Capacity: 1,200–lbs. Dimensions: 24" x 36".

Manufacturer: Little Giant, Manufacturer Part Number: RP4X-1832-5PYRaised 12 gauge steel platform is 20" high to help minimize bending. Four 3/4" expanded metal sides extend 20" high above the deck to help contain those big loads and small parts. All–welded construction ships fully assembled and ready for immediate use. 2 swivel, 2 rigid casters with 5" non–marking polyurethane wheels. Capacity: 1,200–lbs. Dimensions: 24" x 36".

Manufacturer: Little Giant, Manufacturer Part Number: WST1-2448-36Smooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Angle iron cross braces are centered to allow leg room on both sides. These all–welded units ship fully assembled and ready for immediate use. 36" overall height. Capacity: 5,000–lbs. Dimensions: 24" x 48".

Manufacturer: Little Giant, Manufacturer Part Number: WST1-2460-36Smooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Angle iron cross braces are centered to allow leg room on both sides. These all–welded units ship fully assembled and ready for immediate use. 36" overall height. Capacity: 5,000–lbs. Dimensions: 24" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: WST1-3048-36Smooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Angle iron cross braces are centered to allow leg room on both sides. These all–welded units ship fully assembled and ready for immediate use. 36" overall height. Capacity: 5,000–lbs. Dimensions: 30" x 48".

Manufacturer: Little Giant, Manufacturer Part Number: WST2-2448-36Smooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Half depth 12 gauge lower shelf with lip at rear provides room for additional storage while leaving ample room for legs when seated. Capacity 500 lbs. These all–welded units ship fully assembled and ready for immediate use. 36" overall height. Capacity: 5,000–lbs. Dimensions: 24" x 48".

Manufacturer: Little Giant, Manufacturer Part Number: WST2-3048-36Smooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Half depth 12 gauge lower shelf with lip at rear provides room for additional storage while leaving ample room for legs when seated. Capacity 500 lbs. These all–welded units ship fully assembled and ready for immediate use. 36" overall height. Capacity: 5,000–lbs. Dimensions: 30" x 48".

Engineered for heavy-duty performance, the Little Giant Gas Cylinder Cart is built for safe, efficient handling in industrial settings. This durable cart is designed to deliver lasting strength and stability, ensuring that your gas cylinders are transported securely. With precision-engineered components, it provides the reliability required for demanding bulk handling and industrial safety.Key Specifications Manufacturer: Little Giant (Part Number TWFF-40-10FF) Frame Construction: Constructed with strong, fully welded steel tubing (1.05″ O.D.) for enhanced durability Nose Plate: 8″ deep x 14″ wide for secure placement of cylinders Overall Height: 47″ for optimal clearance and maneuverability Support Chain: Securely welded to the frame to safely hold the cylinder in place Wheel Options: Choose between semi-pneumatic and pneumatic wheels to suit your operational needs Features & Benefits Rugged Durability: The all-welded steel frame ensures dependable strength and longevity in demanding industrial environments. Enhanced Safety: Precision-engineered nose plate and welded support chain keep cylinders secure during transport. Versatile Mobility: Choose between semi-pneumatic or pneumatic wheels for smooth performance on various surfaces, reducing downtime. Optimized Efficiency: Thoughtful design features enable secure and efficient bulk handling, streamlining operations on site. Discover more heavy-duty solutions in our Little Giant collection.

Manufacturer: Little Giant, Manufacturer Part Number: T500-LUFully assembled and ready for use, these all welded steel platform trucks are built for long, trouble–free service in medium duty applications. Removable cross–brace handle extends 28" high above the reinforced formed steel deck. Formed steel deck has 1–1/2" to help retain small parts. Comes with 6" x 2" Mold–on Rubber Casters. Capacity: 1,600–lbs. Dimensions: 18" x 32".

Manufacturer: Little Giant, Manufacturer Part Number: T510-LUFully assembled and ready for use, these all welded steel platform trucks are built for long, trouble–free service in medium duty applications. Removable cross–brace handle extends 28" high above the reinforced formed steel deck. Formed steel deck has 1–1/2" to help retain small parts. Comes with 6" x 2" Mold–on Rubber Casters. Capacity: 1,600–lbs. Dimensions: 24" x 36".