$250 to $500

Manufacturer: Justrite, Manufacturer Part Number: 16GFEW16 Gallon Gravity-Fed Eyewash

Manufacturer: Justrite, Manufacturer Part Number: 7325130ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165Â °F (74Â °C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7325230ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB. ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7325120ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for overtheroad transport of flammables. A holddown bracket is tethered to the spout and equipped with a big, easytograsp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165 °F (74 °C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive SafeSqueeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Builtin safety features include internal flame arresters, leak tight, selfclosing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.âš WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7325220ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB. ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: PP12752This is a 2–GALLON DISC HPLC CAN.

Experience fast spill response with the Justrite 20 Gal Portable Spill Pool—a dependable solution built for industrial and commercial spill management. Manufactured by Justrite, this spill containment pool is engineered for rapid deployment and effective hazard control, making it an essential tool for managing leaks from drums, hydraulic lines, and more.Key Features• Economical and ready for emergencies: Simply unfold, shake using the foam ring top, and place under the leak.• Innovative foam ring top: Automatically lifts the containment wall as the fluid level rises.• Durable construction: Made with vinyl fabric that is 20% heavier than competing products for superior abrasion resistance and seam strength.• Space-saving design: Folds compactly for easy storage and quick setup.Product DetailsThe Justrite pop-up pool is designed for both portability and reliability. Its high-visibility yellow color not only aids in quick identification during emergencies but also helps comply with EPA and SPCC regulations for spill prevention and containment. Whether you are dealing with small spills from punctured saddle tanks or managing leaks from complex machinery, this pool provides a reliable safety solution. For more Justrite products, please visit our Justrite collection and explore related PopUp Pools.Specifications• Capacity: 20 gallons• Dimensions: 28″ diameter x 11″ height• Weight: 2 lbs• Portable design with easy unfolding and secure storageThis portable spill containment option is a practical, cost-effective solution for any facility looking to enhance safety and environmental protection.

Manufacturer: Justrite, Manufacturer Part Number: 28223Aerosolv® 7363 Replacement Colormetric Carbon Filter Cartridge, 2 Pack

This 3ft Heavy-Duty Shelf provides a dependable and efficient storage solution designed to maximize space in lockers, garages, and industrial environments. With its robust design and easy assembly, it enhances existing locker shelving systems without sacrificing durability. Perfect for heavy-duty shelving needs, this shelf fulfills industrial storage requirements while ensuring adherence to strict safety guidelines.Specifications• Manufacturer – Justrite• Manufacturer Part Number – 915121• Shelf Length – 3 feet, constructed for industrial durability• Material Composition – Engineered for heavy-duty storage (please refer to installation guidelines for additional details)Key Features• Heavy-duty construction built for demanding environments• Simple assembly with minimal tools required• Enhances current locker shelves to improve storage capacity• Designed for industrial use with superior material integrity• Not compatible with locker models that include explosion–relief panelsInstallation & Usage Tips• Confirm that your existing shelving system is compatible before installation• Secure the shelf using the provided hardware to ensure stability and safety• Regularly inspect the shelf for signs of wear and structural integrityFor more Justrite products and other industrial storage solutions, visit our Justrite Collection. This shelf is the ideal choice for those who require both efficiency and safety in their storage solutions.

Manufacturer: Justrite, Manufacturer Part Number: 26630KJustrite Cease–Fire Waste Receptacles are specially contoured to direct smoke and gas from any fire inside the container, back into the combustion area, cutting off the air supply and extinguishing flames in seconds. Cease–Fire Receptacles provide round–the–clock protection against trash fires and are suitable for use in plants, hospitals, schools, offices and stores. Aluminum heads are virtually corrosion free, providing easy clean–up and long–lasting good looks. Cease–Fire Drum bodies are heavy gauge steel, available in a variety of attractive colors with a rust preventative interior coating. Aluminum heads are available separately for use with existing metal drums.

Manufacturer: Justrite, Manufacturer Part Number: 26014KJustrite Cease–Fire Waste Receptacles are specially contoured to direct smoke and gas from any fire inside the container, back into the combustion area, cutting off the air supply and extinguishing flames in seconds. Cease–Fire Receptacles provide round–the–clock protection against trash fires and are suitable for use in plants, hospitals, schools, offices and stores. Aluminum heads are virtually corrosion free, providing easy clean–up and long–lasting good looks. Cease–Fire Drum bodies are heavy gauge steel, available in a variety of attractive colors with a rust preventative interior coating. Aluminum heads are available separately for use with existing metal drums.

Manufacturer: Justrite, Manufacturer Part Number: 26014WJustrite Cease–Fire Waste Receptacles are specially contoured to direct smoke and gas from any fire inside the container, back into the combustion area, cutting off the air supply and extinguishing flames in seconds. Cease–Fire Receptacles provide round–the–clock protection against trash fires and are suitable for use in plants, hospitals, schools, offices and stores. Aluminum heads are virtually corrosion free, providing easy clean–up and long–lasting good looks. Cease–Fire Drum bodies are heavy gauge steel, available in a variety of attractive colors with a rust preventative interior coating. Aluminum heads are available separately for use with existing metal drums.

Manufacturer: Justrite, Manufacturer Part Number: 26630WJustrite Cease–Fire Waste Receptacles are specially contoured to direct smoke and gas from any fire inside the container, back into the combustion area, cutting off the air supply and extinguishing flames in seconds. Cease–Fire Receptacles provide round–the–clock protection against trash fires and are suitable for use in plants, hospitals, schools, offices and stores. Aluminum heads are virtually corrosion free, providing easy clean–up and long–lasting good looks. Cease–Fire Drum bodies are heavy gauge steel, available in a variety of attractive colors with a rust preventative interior coating. Aluminum heads are available separately for use with existing metal drums.

Manufacturer: Justrite, Manufacturer Part Number: 26014Justrite Cease–Fire Waste Receptacles are specially contoured to direct smoke and gas from any fire inside the container, back into the combustion area, cutting off the air supply and extinguishing flames in seconds. Cease–Fire Receptacles provide round–the–clock protection against trash fires and are suitable for use in plants, hospitals, schools, offices and stores. Aluminum heads are virtually corrosion free, providing easy clean–up and long–lasting good looks. Cease–Fire Drum bodies are heavy gauge steel, available in a variety of attractive colors with a rust preventative interior coating. Aluminum heads are available separately for use with existing metal drums.

Introducing the Track Runner, a high-visibility, yellow vinyl-coated fabric designed to protect berms from tire abrasion. Manufactured by Justrite (Part Number: 28358), this 3′ x 56′ accessory is engineered for durability during skidding, turning, and braking. Ideal for industrial and commercial applications, the Track Runner provides reliable protection that helps extend the life of your containment berm.Key Features & Benefits• Heavy-Duty Material: Crafted from robust yellow vinyl-coated fabric that delivers dependable protection against tire wear.• High Visibility: Its bright color makes it easy to spot during installation and regular inspections.• Simple Installation: Easily laid inside berms along tire paths to minimize damage and enhance the longevity of ground protection systems.• Enhanced Durability: Built to shield surfaces from abrasion caused by frequent vehicle movements.Specifications• Dimensions: 3′ x 56′• Weight: Approximately 28 lbs• Quantity: Supplied as a single track runner (typically ordered in pairs for comprehensive berm protection)• Manufacturer: Justrite, Part Number 28358For best results, pair the Track Runner with complementary products such as ground mats and track mats to further improve berm durability and performance. Discover more solutions from Justrite in our Justrite collection and explore additional containment options to meet all your spill management needs.

Manufacturer: Justrite, Manufacturer Part Number: 14565Type I Nonmetallic Safety Cans are constructed of high–density polyethylene and offer distinct advantages over steel models. They are inert so they standup to tough acids and corrosives, as well as heat. Poly cans are dent, puncture and chip–resistant and their color is integral to the can. All Justrite nonmetallic cans are designed and manufactured with a unique conductive current–carrying carbon insert imbedded into rib of the container, completing a ground path between the cover assembly and the flame arrester in the spout. When used with a grounding strip, this provides proper grounding and prevents the creation of an arc during filling or pouring. All Justrite Nonmetallic Type I cans are FM approved. The self–close cap, pressure relief mechanism and dual–density flame arrester work together to prevent ignition sources from entering without restricting liquid flow in or out of the can.

Manufacturer: Justrite, Manufacturer Part Number: 12772This is a 5 GAL DISP CAN W/ SS FAUCET.

Manufacturer: Justrite, Manufacturer Part Number: 7350130ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB. ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7350230ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7350110ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7350210ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 14765Type I Nonmetallic Safety Cans are constructed of high–density polyethylene and offer distinct advantages over steel models. They are inert so they standup to tough acids and corrosives, as well as heat. Poly cans are dent, puncture and chip–resistant and their color is integral to the can. All Justrite nonmetallic cans are designed and manufactured with a unique conductive current–carrying carbon insert imbedded into rib of the container, completing a ground path between the cover assembly and the flame arrester in the spout. When used with a grounding strip, this provides proper grounding and prevents the creation of an arc during filling or pouring. All Justrite Nonmetallic Type I cans are FM approved. The self–close cap, pressure relief mechanism and dual–density flame arrester work together to prevent ignition sources from entering without restricting liquid flow in or out of the can.

Manufacturer: Justrite, Manufacturer Part Number: 14540Nonmetallic Dispensing Cans permit easy, one–hand dispensing of liquids directly onto work surface. Brass dispenser valves are leakproof and self–closing to minimize spills and control excess. Brass valves are FM–approved and recommended for flammables. Rugged high–density polyethylene body is textured and shaped for a firm grip.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: PP12755This is a 5–GALLON DISC HPLC CAN.