$100 to $250

Manufacturer: Accuform, Manufacturer Part Number: KDD484Gas Cylinder Lockout Cap. Designed to fit most North American high and low pressure gas cylinders. The Snap Cap" Lockout completely covers the main cylinder control and regulator attachment – rendering the cylinder, its contents, and regulator useless. Snap down the side arm and secure the device with a padlock (included). Access is only available by release of the padlock. Snap Cap" Lockout meets DOT standards as a safety device. Made of welded–steel construction and powder coated to withstand the tough and abusive handling conditions that can be subjected to cylinders.SPECIFICATIONSOPTION: Fine Thread

Manufacturer: Apex Tool Group, Manufacturer Part Number: 81918GWModel Number: 81918|UOM: EA|81918GW Includes: 5/16", 3/8", 7/16", 1/2", 5/8", 9/16", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4" - Tools and Tool Storage - GearWrench - Wrenches

Manufacturer: Apex Tool Group, Manufacturer Part Number: 81917GWModel Number: 81917 |UOM: EA|81917GW Includes: 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 5/8", 9/16", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4" - Tools and Tool Storage - GearWrench - Wrenches

Manufacturer: Apex Tool Group, Manufacturer Part Number: 81223GWMade to work—smoothly—every time. Features      - Polished-chrome handle      - Flush-mounted On/Off lever      - Teardrop-shaped head      - Meets ASME B107.10M      - 1/Each - Model Number: 81070|UOM: EAIncludes: - 1/4" Drive, 72 Tooth Dual Material Roto Ratchet - 6 3/4" Length- 3/8" Drive, 72 Tooth Dual Material Roto Ratchet - 9 3/4" Length - Tools and Tool Storage - GearWrench - Ratchets, Sockets, and Drive Tools

Manufacturer: Apex Tool Group, Manufacturer Part Number: 80707GWModel Number: 80707|UOM: EA - Tools and Tool Storage - GearWrench - Tool Sets

Manufacturer: Apex Tool Group, Manufacturer Part Number: 81400GWModel Number: 81400|UOM: EA - Tools and Tool Storage - GearWrench - Ratchets, Sockets, and Drive Tools Pricing based on ordering in multiples of 6

Manufacturer: Apex Tool Group, Manufacturer Part Number: 82306GWModel Number: 82306|UOM: EA - Tools and Tool Storage - GearWrench - Striking and Struck Products

Manufacturer: Apex Tool Group, Manufacturer Part Number: 82301GWGearWrench® 3-Piece Indexing Pry Bar Set - Model Number: 82301D|UOM: EA - Tools and Tool Storage - GearWrench - Pry Bars

Manufacturer: Apex Tool Group, Manufacturer Part Number: 80550GWGearWrench® 57-Piece Mechanics Tool Sets, SAE/Metric, 3/8" Drive - Model Number: 80550|UOM: EA - Tools and Tool Storage - GearWrench - Tool Sets

Manufacturer: Apex Tool Group, Manufacturer Part Number: 9700GWModel Number: 9700|UOM: EA|9700GW Includes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" - Tools and Tool Storage - GearWrench - Wrenches Pricing based on ordering in multiples of 10

Manufacturer: Apex Tool Group, Manufacturer Part Number: 9417GWModel Number: 9417|UOM: EA|9417GW Includes: 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 18 mm - Tools and Tool Storage - GearWrench - Wrenches

Manufacturer: Apex Tool Group, Manufacturer Part Number: 9317GWModel Number: 9317|UOM: EA|9317GW Includes: 5/16", 3/8", 7/16", 1/2", 5/8", 9/16", 3/4" - Tools and Tool Storage - GearWrench - Wrenches

Manufacturer: PrepWell Industry, Manufacturer Part Number : 9582104Designed to safely collect, transport and dispose of organic liquids (urine, emesis, blood, serous materials, laboratory specimens and/or chemicals), the GelMax pad is a single-use device made of super absorbent crystals in an easy to use pad that turns urine, blood, chemicals and liquid materials into gel, thus blocking the dissemination of reagents and liquids handled by nurses or laboratory personnel. The GelMax pad is ideal for containment and may be used with any medical collection vessel, such as urinals, suction containers, vials, emesis basins, pails, etc. Benefits • Recommended for infectious or isolation patients • Helps reduce risk of nosocomial infections and crosscontamination • Single-use product, easy to use and safe disposal • Decreased risk of direct and indirect contact • Eliminates odors Instructions for Use 1. Using dry hands, open the box and remove one GelMax pad. 2. Place the pad inside the container of organic liquids or into a container that will hold liquids. 3. Wait a few seconds for the contents to turn into a gelatinous substance. Disposal: • If contents are not infectious, dispose of pad with regular waste. • Discard infectious waste according to facility infection control guidelines. • Do not dispose of the pad in pipes or sewers. Dispose of in the appropriate manner. Precautions Single-use product. Do NOT reuse Keep out of reach of children Do not use with wet hands Product Composition Non-woven composite of pulp and acrylic polymers

Manufacturer: Incom, Manufacturer Part Number: GHS1002Our HazCom GHS Information Center provides a central place to easily access all S.D.S. sheets as well as the basic information required for the HazCom GHS system. ***A $10.00 handling fee will be added to freight for all GHS product orders under $100.00*** SPECIFICATIONSGHS Center, SDS center

Manufacturer: Incom, Manufacturer Part Number: GHS1001Our HazCom GHS Information Center provides a central place to easily access all S.D.S. sheets as well as the basic information required for the HazCom GHS system. Also available in Spanish and French versions – sold separately. ***A $10.00 handling fee will be added to freight for all GHS product orders under $100.00*** SPECIFICATIONSGHS Center, SDS center

Manufacturer: Enpac, Manufacturer Part Number : 43-36-GGGrate Guardian is a Catch Basin Filter designed to remove sediment and debris from stormwater as it enters the catch basin. -Grate is inserted into the one side of the Grate Guardian for use -Weight of the grate seals in place -Designed to grab sediment and debris before it enters -Durable filter -Center overflow port to prevent water from backing up in a heavy rain event

Manufacturer: Justrite, Manufacturer Part Number: 29127GThis is GRAY PAINT TOUCH–UP.

Manufacturer: Vestil, Manufacturer Part Number: WBT-G-3624Easy up, easy down and two (2) easy ways to change them around! The Plastic Work Bench can be set up in minutes to create an instant temporary or permanent island of productivity within any warehouse manufacturing floor or office environment. The grid top is ideal when work produces small scrap that can clutter work surfaces.

Manufacturer: Grief Brothers, Manufacturer Part Number: OK-53UN Approved!These poly drums are blow–molded from a high molecular weight, high–density polyethylene and conform to UN recommendations. Each container is optimally drainable and offers the highest level of performance and value. The 20–gallon open–head drum comes in gray only. The 15, 30 and 55–gallon open–head drums come standard with a plain lid. Bung & Vent lid available upon request. Call for other sizes and colors.  Minimum Order of 100 Drums!SPECIFICATIONS23 lbs.1 drum1H2/Y140/S

This durable ground pad is designed to protect 6′×6′ berms from rugged terrain, punctures, and environmental damage. Developed by Eagle under the model T8427GP, this product enhances spill containment capabilities while delivering reliable performance on industrial sites. Its robust construction makes it an excellent solution for spill management and maintaining environmental safety.Key Benefits• Reliable protection against punctures, friction, and harsh conditions• High-quality construction for long-term durability• Easy installation process that works with a variety of berm systems• Enhances overall safety by preserving spill containment in demanding industrial settingsDetailed Specifications• Manufacturer: Eagle (Model: T8427GP)• Dimensions: Designed for a 6′×6′ berm• Weight: 22 lbs• Engineered for enhanced spill containment and durability under heavy useWhether you’re securing containment berms on a rugged job site or improving safety protocols at your facility, this ground pad provides performance and peace of mind. For more spill containment solutions, browse our collection on Containment Berms.

Manufacturer: Zing, Manufacturer Part Number: 7389 This lightweight group lockout box is made from durable plastic and accepts up to 29 padlocks. Mounting hardware included. The Group Lockout Box measures 11" x 13" x 4".

Manufacturer: Zing, Manufacturer Part Number: 7635-ZG The lockout box includes two compartments – a clear-fascia key compartment and a large-size storage compartment. The lockout box is made from high-quality, heavy-duty steel with powder coating, providing superior protection against corrosion and ensuring its suitability for use in industrial environments. The lockout box can be securely locked by attaching up to 17 individual padlocks to holes around the top compartment, preventing unauthorized access to equipment. The larger compartment offers ample space for storing a large number of padlocks or other lockout devices, making it suitable for group lockout procedures involving multiple workers and equipment. An ergonomic Stainless-Steel handle is provided on the top side for easy handling and carrying of the lockout boxes.

Manufacturer: Accuform, Manufacturer Part Number: KCC630Group Lockout View Boxes. See the lock and see all the keys involved in a lockout station – yet keep them lock away. Full size, visible yellow group lock box has a clear cover to show the keys from a lockout job. Inside, the box has 16 hooks to hang such keys. The edge of the cover has holes that match those on the box. Padlocks (sold separately) placed through these holes prevent removal of the cover – which accommodates up to 27 padlock associated to workers involved. A padlock on means worker on the job, and padlock removed signifies that worker has completed their portion of the job. However, there is no access to the keys of the lockout devices until the last padlock is removed – with the bottom center hole generally for the supervisor's padlock as the last to remove for inspection of work before lockout release. 10 1/2"h x 12 3/4"w x 3 3/8"d box is made of impact resistant polycarbonate. Features two rear mounting holes and top slot in the cover to drop in additional keys, once a lockout procedre has already started. Choose hinge cover and slide cover styles. Slide cover glides along a channel to further secure the cover in place.SPECIFICATIONSSTYLE: Hinge Cover

Manufacturer: Accuform, Manufacturer Part Number: KCC633Group Lockout View Boxes. See the lock and see all the keys involved in a lockout station – yet keep them lock away. Full size, visible yellow group lock box has a clear cover to show the keys from a lockout job. Inside, the box has 16 hooks to hang such keys. The edge of the cover has holes that match those on the box. Padlocks (sold separately) placed through these holes prevent removal of the cover – which accommodates up to 27 padlock associated to workers involved. A padlock on means worker on the job, and padlock removed signifies that worker has completed their portion of the job. However, there is no access to the keys of the lockout devices until the last padlock is removed – with the bottom center hole generally for the supervisor's padlock as the last to remove for inspection of work before lockout release. 10 1/2"h x 12 3/4"w x 3 3/8"d box is made of impact resistant polycarbonate. Features two rear mounting holes and top slot in the cover to drop in additional keys, once a lockout procedre has already started. Choose hinge cover and slide cover styles. Slide cover glides along a channel to further secure the cover in place.SPECIFICATIONSSTYLE: Slide Cover