$100 to $250

Manufacturer: UltraTech, Manufacturer Part Number: 751 Detectable Warning System For The Visually–Impaired. Ultra–ADA Warning Pads are designed for the visually impaired to feel the raised, truncated cones on the surface with their feet. This, in combination with the tapping cane, can alert them to a different surface than the surrounding concrete. Please specify color when ordering. Available in 4 sizes Choose from Safety Yellow, Brick Red and Black Can be installed as part of new construction or as a retrofit Installs quickly and easily using only adhesive – no screws or other hardware required Complies with the Americans with Disabilities Act (ADA), 49 CFR 37.9 SPECIFICATIONS12 lbs.2'L x 4'W

Manufacturer: UltraTech, Manufacturer Part Number: 8635The Ultra-Berm Builder, Plus Model has the versatility of the standard model but the additional ruggedness and mounting option for a more permanent installation that can be driven over. Product Highlights -Create permanent containment on concrete, asphalt and most sealed areas. -Heavy-duty, 40-ounce, vinyl-coated fabric can withstand traffic from trucks, forklifts and other vehicles. -Open-cell foam core compresses to approximately 1/4" when driven over and springs back to shape -when vehicles pass. -Secures to the floor with sealant (not included) and is reinforced with pre drilled aluminum mounting -strips (included) and steel anchors (included). -Can be used with standard Ultra-Berm Builder.

Manufacturer: UltraTech, Manufacturer Part Number: 8636The Ultra-Berm Builder, Plus Model has the versatility of the standard model but the additional ruggedness and mounting option for a more permanent installation that can be driven over. Product Highlights -Create permanent containment on concrete, asphalt and most sealed areas. -Heavy-duty, 40-ounce, vinyl-coated fabric can withstand traffic from trucks, forklifts and other vehicles. -Open-cell foam core compresses to approximately 1/4" when driven over and springs back to shape -when vehicles pass. -Secures to the floor with sealant (not included) and is reinforced with pre drilled aluminum mounting -strips (included) and steel anchors (included). -Can be used with standard Ultra-Berm Builder.

Manufacturer: UltraTech, Manufacturer Part Number: 8980 Versatile spill containment berm designed for use in extreme cold The Ultra-Containment Berm® Foam Wall XC Model, also known as a “duck pond” or “mini spill berm,” is a versatile spill containment solution specifically engineered for extreme cold conditions. Its design effectively captures nuisance leaks and spills from vehicles, oily equipment, tanks, and drums. Constructed with robust 22 oz. (31 mil) EVA material ensures durability even in the most frigid environments. Product Highlights Capture nuisance leaks and spills from vehicles, oily equipment, tanks and drums. Material of construction: 22 oz. (31 mil) EVA - Designed specifically for use in extreme cold temperatures. Soft foam sidewall compresses for convenient loading and off-loading. Choose from several standard sizes to meet your spill containment needs - custom sizes also available. Low, 4-inch sidewall contains spills - keeps plant floors and soil free from contamination. No set-up required - simply unfold for quick deployment. Folded units require minimal storage space. Built-in handles (18” long, polyester) help with transport, placement and storage. Helps meet SPCC and EPA Container Storage Regulation 40 CFR 264.175 Spill Containment Regulations.

Manufacturer: UltraTech, Manufacturer Part Number: 8981 Versatile spill containment berm designed for use in extreme cold The Ultra-Containment Berm® Foam Wall XC Model, also known as a “duck pond” or “mini spill berm,” is a versatile spill containment solution specifically engineered for extreme cold conditions. Its design effectively captures nuisance leaks and spills from vehicles, oily equipment, tanks, and drums. Constructed with robust 22 oz. (31 mil) EVA material ensures durability even in the most frigid environments. Product Highlights Capture nuisance leaks and spills from vehicles, oily equipment, tanks and drums. Material of construction: 22 oz. (31 mil) EVA - Designed specifically for use in extreme cold temperatures. Soft foam sidewall compresses for convenient loading and off-loading. Choose from several standard sizes to meet your spill containment needs - custom sizes also available. Low, 4-inch sidewall contains spills - keeps plant floors and soil free from contamination. No set-up required - simply unfold for quick deployment. Folded units require minimal storage space. Built-in handles (18” long, polyester) help with transport, placement and storage. Helps meet SPCC and EPA Container Storage Regulation 40 CFR 264.175 Spill Containment Regulations.

Manufacturer: UltraTech, Manufacturer Part Number: 8982 Versatile spill containment berm designed for use in extreme cold The Ultra-Containment Berm® Foam Wall XC Model, also known as a “duck pond” or “mini spill berm,” is a versatile spill containment solution specifically engineered for extreme cold conditions. Its design effectively captures nuisance leaks and spills from vehicles, oily equipment, tanks, and drums. Constructed with robust 22 oz. (31 mil) EVA material ensures durability even in the most frigid environments. Product Highlights Capture nuisance leaks and spills from vehicles, oily equipment, tanks and drums. Material of construction: 22 oz. (31 mil) EVA - Designed specifically for use in extreme cold temperatures. Soft foam sidewall compresses for convenient loading and off-loading. Choose from several standard sizes to meet your spill containment needs - custom sizes also available. Low, 4-inch sidewall contains spills - keeps plant floors and soil free from contamination. No set-up required - simply unfold for quick deployment. Folded units require minimal storage space. Built-in handles (18” long, polyester) help with transport, placement and storage. Helps meet SPCC and EPA Container Storage Regulation 40 CFR 264.175 Spill Containment Regulations.

Discover advanced spill management with our UltraTech containment berm – a top choice among containment booms and berm solutions. Constructed with a reinforced polyethylene (RPE) 30-MIL liner and a rugged L-bracket design, this berm is ideal for dependable spill containment, whether you require a temporary setup or a permanent storage solution. Measuring 6' x 6' x 1' with a 269-gallon capacity, it provides both durability and easy deployment in challenging industrial settings.Specifications Dimensions: 6' x 6' x 1' Capacity: 269 gallons Material: Reinforced polyethylene (RPE), 30 MIL Design: Frameless with durable L-bracket support Model: Economy Model by UltraTech (8240) Key Features Durable 30-MIL liner for superior puncture and tear resistance Lightweight, frameless design for quick and easy setup Robust L-bracket structure that ensures secure sidewall support Two-tone construction to easily spot wear or damage Custom sizes available for tailored spill containment solutions Cost-effective design perfect for both IBCs and large frac tanks ApplicationsIdeal for industrial and commercial spill control, this berm effectively contains leaks and spills from IBCs and frac tanks. Whether used in manufacturing, construction, or environmental services, its versatile design meets both temporary and permanent storage needs.For more advanced spill management solutions, explore our UltraTech Collection.

Manufacturer: UltraTech, Manufacturer Part Number: 8897Modular, hard-walled system provides long-term, high-capacity spill containment. Modular wall sections and corners can be easily assembled to form almost any size/shape spill containment area needed. Heavy-duty, 30 mil, textured polyethylene liner provides rugged, impermeable barrier to capture leaks and spills. Creates large, semi-permanent containment areas. Versatile system can be easily disassembled for reuse at future sites. Unlike some containment systems, the Ultra-Containment Wall is not secured to the substrate, so it is perfect for use in parking lots, sand, rocky soil, muddy soil, frozen soil or on concrete areas. Made in the USA. Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175.

Manufacturer: UltraTech, Manufacturer Part Number: 8881Modular, hard-walled system provides long-term, high-capacity spill containment. Modular wall sections and corners can be easily assembled to form almost any size/shape spill containment area needed. Heavy-duty, 30 mil, textured polyethylene liner provides rugged, impermeable barrier to capture leaks and spills. Creates large, semi-permanent containment areas. Versatile system can be easily disassembled for reuse at future sites. Unlike some containment systems, the Ultra-Containment Wall is not secured to the substrate, so it is perfect for use in parking lots, sand, rocky soil, muddy soil, frozen soil or on concrete areas. Made in the USA. Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175.

Manufacturer: UltraTech, Manufacturer Part Number: 0648 Large funnel allows quick and easy pouring or draining into IBC tanks The heavy-duty, all-polyethylene, Ultra-IBC Funnel makes “quick work” of any pouring or draining necessary for intermediate bulk containers (IBCs). The funnel locks into place and the built-in strainer fits directly into the top of the tote. Product Highlights Raised ridges allow containers or other items (gloves, rags, etc.) to be placed on the funnel for passive draining Fits most caged IBCs on the market All polyethylene construction provides excellent chemical and corrosion resistance Bottom of funnel is designed to lock into place on the IBC cage Built-in strainer helps remove contaminants from poured/drained liquid

Manufacturer: UltraTech, Manufacturer Part Number: 5300Capture leaks and drips from hose and pipe connections. Protect the environment from leaking fuel and chemical pipe or hose connections. Polyethylene construction- won't rust or corrode. Two Channel sizes accommodate 2 1/2" and 3 1/2" pipes, providing maximum versatility and ensure pipes remain in place. Lightweight and durable- easy to move and store but built to last in the field. Built -in handles provide easy transport and portability. Stackable for convenient shipping and storage. Protected by the industry's strongest warranty- Five (5) years against any material or workmanship defects. Made in the USA.

Manufacturer: UltraTech, Manufacturer Part Number: 4126Set of 12 Ultra–Mini Sprayer Replacement Cartridges, US Version. For use in our Ultra–Mini Sprayer (item 4122).SPECIFICATIONS12 replacement cartridges4 lbs.

Manufacturer: UltraTech, Manufacturer Part Number: 5220 Ultra–Oil Filter Boom: Capture Floating Oil Quickly And Stop It From Reaching The Shore. Six–foot–long booms made with Ultra-Filter-Tex absorb oil from water much faster than standard polypropylene booms. 10 x 10 x 1. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 1820Protect Cords & Cables And Avoid Dangerous Tripping Hazards. The Ultra–Sidewinder Cable Protection System is an innovative new solution for protecting cables run across a floor. The new design articulates left and right—allowing the system to turn corners and adapt to the layout of the room, while maintaining full protection for the cables and trip protection for pedestrians. The cables can be left in the system and coiled around a three foot diameter for the ultimate in portability, or left in place indefinitely. There is no longer a compromise between safety and flexibility. Articulating pieces offer flexible design – curves, corners and s–curves are easily made while maintaining a completely flat profile. Modular design makes it easy to reconfigure, repair, and replace targeted segments, even while the cable remains connected. Simple "snap in" assembly – no tools or cutting required. Internal channel opening – 3/4"W x 3/8"H (19mm x 9.5mm). Maximum weight capacity: 2,000 lbs./sq. in.

Manufacturer: UltraTech, Manufacturer Part Number: 1842The Ultra–Sidewinder Cable Protection System™ is an innovative new solution for protecting cables run across a floor. The new design articulates left and right — allowing the system to turn corners and adapt to the layout of the room, while maintaining full protection for the cables and trip protection for pedestrians. Cables can be left in the system for the ultimate in portability, or left in place indefinitely. There is no longer a compromise between safety and flexibility. Articulating pieces offer flexible design – curves, corners and s–curves are easily made while maintaining a completely flat profile. Modular design makes it easy to reconfigure, repair, and replace targeted segments, even while the cable remains connected. Simple "snap in" assembly – no tools or cutting required. Fully customizable length.SPECIFICATIONS13.5 lbs.3-foot system40"L x 13.625"W x 2.125"H

Manufacturer: UltraTech, Manufacturer Part Number: 1840The Ultra–Sidewinder Cable Protection System™ is an innovative new solution for protecting cables run across a floor. The new design articulates left and right — allowing the system to turn corners and adapt to the layout of the room, while maintaining full protection for the cables and trip protection for pedestrians. Cables can be left in the system for the ultimate in portability, or left in place indefinitely. There is no longer a compromise between safety and flexibility. Articulating pieces offer flexible design – curves, corners and s–curves are easily made while maintaining a completely flat profile. Modular design makes it easy to reconfigure, repair, and replace targeted segments, even while the cable remains connected. Simple "snap in" assembly – no tools or cutting required. Fully customizable length. Black & yellow color provides additional "safety tape" type visual warning.SPECIFICATIONS13.5 lbs.3-foot system40"L x 13.625"W x 2.125"H

Manufacturer: UltraTech, Manufacturer Part Number: 0275 Capture leakage of fluid from construction equipment, vehicles and other machinery to prevent environmental damage and fines A “must-have” for every towing, construction, and mining company to prevent environmental damage and potential fines due to leaks and spills. Contains oils, fuels, and anti-freeze. Protect the environment; protect your business. Add the Ultra-Spill Diaper to your on-site spill kit or keep it nearby in the vehicle’s cab. Product Highlights Flexible and adjustable bungee cord/hook attaching system works on almost any vehicle. Three-layer absorbent material; top layer is a general absorption allowing anti-freeze and acids to be absorbed, the middle layer being a thick oil-only material to absorb oil, gas, diesel and all hydrocarbons, bottom layer is a 4 Mil plastic barrier to keep any fluids from leaching through. Quick and easy installation - simply attach hooks to secure points on vehicle/equipment for proper placement under leaks or drips. Folded, compact design stores easily in truck cabs, spill kits or other areas for quick deployment when needed. Helps meet state Litter Control Acts as well as EPA Spill Prevention, Control, and Countermeasure (SPCC) Regulation.

Manufacturer: UltraTech, Manufacturer Part Number: 1321Create Your Own Containment Area. Finally! A low–profile, modular SpillDeck system that allows you to design and create a containment system that meets YOUR specific needs. These 1, 2 and 4–Drum modules can be mixed and matched to give you virtually unlimited flexibility. Bulkhead fittings not only hold sections together, but also allow spills to flow to adjacent sump areas, increasing overall containment capacity. Modules can be connected together or with our SpillDeck Bladder Systems for expanded storage and containment capacity. BULKHEAD FITTINGS NOT INCLUDED! Chemical–resistant polyethylene construction Low–Profile – only 5 3/4" high Helps comply with 40 CFR 264.175 requirements 1, 2 and 4–Drum Modules Optional Ramp for easy loading and unloading SPECIFICATIONS1,500 lbs. Load Bearing Capacity, 11 gal. Sump Capacity - 23 lbs.1 deck25.75" L x 25.75" W x 5.75" H

Manufacturer: UltraTech, Manufacturer Part Number: 8100-YELPopUp Pools – Instant Containment Made Easy! Just give these PopUp Pools a quick shake and they instantly expand and are ready for any emergency. Patented design features a foam ring that rises with the level of liquid to raise the sidewalls. Polyethylene construction offers excellent chemical resistance. Ideal for damaged saddle tanks, hazmat spills, decontamination pools as well as leaking machinery and piping. PopUp Pools are 10 mil. thick, have a sprung–steel frame that instantly deploys the pool and come complete with carrying case. 64.5" Bot Dia x 53" Top Dia x 12" H. 5.5 lbs.

This high-quality containment tarp is designed to protect your containment berms from punctures, tears, and rips. Crafted from durable, 10‑oz vinyl‑coated polyester woven mesh, it fits berm sizes such as 4' x 6', 6' x 6', and 10' x 10'. Enjoy reliable, cost‑effective protection against debris and rough surfaces while ensuring long-lasting berm performance.Key Features• Provides strong protection against damage from rocks and debris• Fits multiple berm sizes for versatile spill containment• Made of premium vinyl‑coated polyester woven mesh for superior durability• Acts as a vital part of your overall spill response strategySpecifications• Dimensions: 11' x 11' ground tarp designed for berms• Material: 10‑oz vinyl‑coated polyester woven mesh• Manufacturer: UltraTech (Part Number: 8311)• Bulk Discount: Available on orders of 10 or more items• Contact: Call contractor at 317‑867‑2911 for more details or bulk pricingEnsure your spill containment system stays secure by adding this dependable containment tarp to your setup. For more products from UltraTech, visit the UltraTech collection or explore our Containment Berms collection for additional spill management solutions.

Manufacturer: UltraTech, Manufacturer Part Number: 2121The Circular Drain Stopper! Prevent spills and runoff from entering drains. These polyurethane plugs form a tight, chemical–resistant seal. Removes easily when normal drain functionality is desired. Available in seven sizes from 2” to 12” in diameter. Drain Plug Kit includes 2”, 3” and 4” plugs packaged in a plastic carrying case. Drain Plugs are tapered. The listed size is the measurement at the middle of the plug. Tapered design wedges securely into standard drains to stop any flow Eyebolts are removable, allowing installation of grating with Drain Plug in place Non–absorbing, easily cleaned for repeated use SPECIFICATIONS32 lbs.1 plugFor 12" diameter drains

Manufacturer: UltraTech, Manufacturer Part Number: 1086Create Your Own Containment Area. Finally! A low–profile, modular SpillDeck system that allows you to design and create a containment system that meets YOUR specific needs. These 1, 2 and 4–Drum modules can be mixed and matched to give you virtually unlimited flexibility. Bulkhead fittings not only hold sections together, but also allow spills to flow to adjacent sump areas, increasing overall containment capacity. Modules can be connected together or with our SpillDeck Bladder Systems for expanded storage and containment capacity. BULKHEAD FITTINGS NOT INCLUDED! Chemical–resistant polyethylene construction Low–Profile – only 5 3/4" high Helps comply with 40 CFR 264.175 requirements 1, 2 and 4–Drum Modules Optional Ramp for easy loading and unloading SPECIFICATIONS3,000 lbs. Load Bearing Capacity, 22 gal. Sump Capacity - 40 lbs.1 deck25.75" L x 52" W x 5.75" H

Manufacturer: UltraTech, Manufacturer Part Number: 1016 Custom–fitted cover quickly pulls over drums to keep rainwater out of pallets. SPECIFICATIONS5 lbs

Manufacturer: UltraTech, Manufacturer Part Number: 8020-YELPopUp Pools – Instant Containment Made Easy! Just give these PopUp Pools a quick shake and they instantly expand and are ready for any emergency. Patented design features a foam ring that rises with the level of liquid to raise the sidewalls. Polyethylene construction offers excellent chemical resistance. Ideal for damaged saddle tanks, hazmat spills, decontamination pools as well as leaking machinery and piping. PopUp Pools are 10 mil. thick, have a sprung–steel frame that instantly deploys the pool and come complete with carrying case. 35" Bot Dia x 28" Top Dia x 8" H. 2.5 lbs.