Forklift Accessories

Manufacturer: Vestil, Manufacturer Part Number: FE-5-63-RAccommodates Fork Width: 5", Fork Extension Inside Width: 5", Length: 63", Maximum Fork Thickness: 2", Style: Round – Round Fork Extensions – Ideal for moving large rolls of material. To install insert loop at the tip of the fork and slide it up at a 45 degree angle. Then lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than 150%.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-63-TAccommodates Fork Width: 5", Fork Extension Inside Width: 5", Length: 63", Maximum Fork Thickness: 2", Style: Triangular – Triangular Fork Extensions – Ideal for moving large rolls of material. To install insert loop at the tip of the fork and slide it up at a 45 degree angle. Then lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than 150%.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-108-P-RSProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork. MFG Part# FE-4-108-P-RS

Manufacturer: Vestil, Manufacturer Part Number: FE-5-108-P-RSProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork. MFG Part# FE-5-108-P-RS

Manufacturer: Vestil, Manufacturer Part Number: FE-6-108-P-RSProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork. MFG Part# FE-6-108-P-RS

Manufacturer: Vestil, Manufacturer Part Number: FE-4-120-P-RSProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork. MFG Part# FE-4-108-P-RS

Manufacturer: Vestil, Manufacturer Part Number: FE-5-120-P-RSProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork. MFG Part# FE-5-108-P-RS

Manufacturer: Vestil, Manufacturer Part Number: FE-6-120-P-RSProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork. MFG Part# FE-6-108-P-RS

Manufacturer: Vestil, Manufacturer Part Number: SPB-548Overall Plow Width: 6 feet, Plow Width at 24° Angle: 66", Plow Width at 47° Angle: 48", Maximum Fork: 5"W x 48"L – Fork Mounted Snow Plow Blades – Designed for use with your fork truck, these Snow Plow Blades are multifunctional to work with your existing equipment. No more waiting for daytime snow removal. Simply place the snow blade onto your fork truck and away you go! Installation is as easy as sliding the forks into the fork pockets and securing them to the fork carriage. Prevent damage from obstacles and rough or uneven surfaces with trip springs. Easy angling and backgrade capabilities for optimal performance. Constructed of" rollplate with steel rigs. The blade edge is 5/8" x 6" hardened steel. Counterbalance shipped empty.

Manufacturer: Vestil, Manufacturer Part Number: SPB-748Overall Plow Width: 6 feet, Plow Width at 24° Angle: 66", Plow Width at 47° Angle: 48", Maximum Fork: 7"W x 48"L – Fork Mounted Snow Plow Blades – Designed for use with your fork truck, these Snow Plow Blades are multifunctional to work with your existing equipment. No more waiting for daytime snow removal. Simply place the snow blade onto your fork truck and away you go! Installation is as easy as sliding the forks into the fork pockets and securing them to the fork carriage. Prevent damage from obstacles and rough or uneven surfaces with trip springs. Easy angling and backgrade capabilities for optimal performance. Constructed of" rollplate with steel rigs. The blade edge is 5/8" x 6" hardened steel. Counterbalance shipped empty.

Manufacturer: Vestil, Manufacturer Part Number: FL-4000-NUniform Capacity (pounds): 4,000, Dump Angle (degrees): 90, Volume (cubic yards): 1, Fork Pocket Center (in.): 24, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2 – The Fork Mounted Front Loader is engineered for use with your existing fork truck. “Dust Pan" design is ideal for transporting snow, gravel, sand, or refuse. Pull release cable to dump contents of scoop. Attaches quickly and easily to most fork trucks. Beveled front edge for better scooping ability. All welded steel construction with durable powder coat finish.

Manufacturer: Vestil, Manufacturer Part Number: FM-T-DUMPCapacity: 1,000 lbs., Overall Size: 40"W x 52"L x 41"H – Fork Truck Mounted Trash Can Dumper – Saves time and reduces work–related injuries caused by lifting and dumping heavy waste containers. This innovative product will allow a fork truck driver to lift and dump refuse containers weighing up to 1,000 lbs. without ever leaving the seat of the fork truck. Secure dumper to fork truck with safety chain and run cable to drivers seat. Align trash can with dumper and lock into place. Once locked in place, transport trash can to refuse container, align and pull chain to dump refuse container contents. Fork pockets are 2.25: high by 7.25" wide usable. Steel construction for years of dependable use.

Manufacturer: Vestil, Manufacturer Part Number: SPB-P-72Unique design attaches to fork truck forks. Pass through fork tubes keep weight back towards fork truck mast. Locking pins secure snow plow to forks for safety. The steel construction has a brightly colored baked-in powder-coated finish for added toughness and clear visibility. The attached sides contain the snow in a direct manner for time and safety efficiency. MFG Part# SPB-P-72

Manufacturer: Vestil, Manufacturer Part Number: SPC-3668-2LA stackable material cart provides the same great benefit of a standard material cart, while allowing multiple units to be stacked for a smaller warehouse footprint. A steel platform and structure enables a larger weight capacity of items to be maneuvered in a more efficient timeframe. A removable bar on each end of the cart gives the user the ability to have single or dual layers of product. The surface is smooth to diminish the chances of abrasion during the jostling, while rolling between areas on the included casters. The units are stacked together using a simple four corner post design for a more even weight distribution. MFG Part# SPC-3668-2L

Manufacturer: Vestil, Manufacturer Part Number: SPB-556Designed for use with your fork truck, this Snow Plow Blade is multifunctional to work with your existing equipment. No more waiting for daytime snow removal. Simply place the snow blade onto your fork truck and away you go! Installation is as easy as sliding the forks into the fork pockets and securing them to the fork carriage. Prevent damage from obstacles and uneven surfaces with trip springs. Easy angling and backgrade capabilities for optimal performance. Constructed of rollplate with steel ribs on back. The blade edge is hardened steel.

Manufacturer: Vestil, Manufacturer Part Number: SPB-756Designed for use with your fork truck, this Snow Plow Blade is multifunctional to work with your existing equipment. No more waiting for daytime snow removal. Simply place the snow blade onto your fork truck and away you go! Installation is as easy as sliding the forks into the fork pockets and securing them to the fork carriage. Prevent damage from obstacles and uneven surfaces with trip springs. Easy angling and backgrade capabilities for optimal performance. Constructed of rollplate with steel ribs on back. The blade edge is hardened steel.

Manufacturer: Vestil, Manufacturer Part Number: SPB-N-72Usable Fork Pocket Length (in.): 24, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Total Blade Rotation Each Side (degrees): 60, Construction : Steel, Finish : Powder Coat – With its unique design the Snow Plow attaches to fork truck forks. Pass through fork tubes keep weight back towards fork truck mast. Locking pins secure snow plow to forks for safety. Manual pivot mechanism for angled plowing on both sides. Floating pads allow for adjustment of plowing height. Adjustable springs allow blade to pivot back for safety.