Forklift Accessories

Manufacturer: Vestil, Manufacturer Part Number: VSWP-48Overall Size (WxDxH): 48"x9"x12", Fork Pocket (WxDxH): 5"x7 1/4"x2", Sweeping Width: 48", Bristle Length: 8" – Fork Truck Mounted Brush Sweeper – The rugged lightweight Fork Truck Broom is ideal for interior and exterior commercial sweeping. Great for all cleanup applications; docks, warehouses, and parking lots. Lightweight aluminum body with polypropylene bristles (replaceable). Red powder coat finish. Fork pockets measure 7" deep x 5" wide x 2" high. Unit attaches to forks by sliding forks into fork pockets and securing with locking screws. Optional Dust Mop attaches to broom for sweeping fine material on polished floors.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-54-RAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 54", Maximum Fork Thickness: 2", Style: Round – Round Fork Extensions – Ideal for moving large rolls of material. To install insert loop at the tip of the fork and slide it up at a 45 degree angle. Then lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than 150%.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-54-RAccommodates Fork Width: 5", Fork Extension Inside Width: 5", Length: 54", Maximum Fork Thickness: 2", Style: Round – Round Fork Extensions – Ideal for moving large rolls of material. To install insert loop at the tip of the fork and slide it up at a 45 degree angle. Then lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than 150%.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-54-TAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 54", Maximum Fork Thickness: 2", Style: Triangular – Triangular Fork Extensions – Ideal for moving large rolls of material. To install insert loop at the tip of the fork and slide it up at a 45 degree angle. Then lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than 150%.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-54-TAccommodates Fork Width: 5", Fork Extension Inside Width: 5", Length: 54", Maximum Fork Thickness: 2", Style: Triangular – Triangular Fork Extensions – Ideal for moving large rolls of material. To install insert loop at the tip of the fork and slide it up at a 45 degree angle. Then lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than 150%.

Manufacturer: Vestil, Manufacturer Part Number: VSWP-60Overall Size: 60"W x 9"D x 12"H, Fork Pocket: 5"W x 7"D x 2"H, Sweeping Width: 60", Bristle Length: 8" – Fork Truck Mounted Brush Sweeper – The rugged lightweight Fork Truck Broom is ideal for interior and exterior commercial sweeping. Great for all cleanup applications; docks, warehouses, and parking lots. Lightweight aluminum body with polypropylene bristles (replaceable). Red powder coat finish. Fork pockets measure 7" deep x 5" wide x 2" high. Unit attaches to forks by sliding forks into fork pockets and securing with locking screws.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-63-RAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 63", Maximum Fork Thickness: 2", Style: Round – Round Fork Extensions – Ideal for moving large rolls of material. To install insert loop at the tip of the fork and slide it up at a 45 degree angle. Then lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than 150%.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-63-TAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 63", Maximum Fork Thickness: 2", Style: Triangular – Triangular Fork Extensions – Ideal for moving large rolls of material. To install insert loop at the tip of the fork and slide it up at a 45 degree angle. Then lay it down over the fork. OSHA regulations require that extensions do not exceed the length of the fork by more than 150%.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-72-PAccommodates Fork Width: 5", Fork Extension Inside Width: 5", Length: 72", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-72-PAccommodates Fork Width: 6", Fork Extension Inside Width: 6", Length: 72", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-84Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 84" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-84-PMaximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-84-PAccommodates Fork Width: 6", Fork Extension Inside Width: 6", Length: 84", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-96Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 96" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-96Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 96" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-96-PAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 96", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-96-PAccommodates Fork Width: 5", Fork Extension Inside Width: 5", Length: 96", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-96-PAccommodates Fork Width: 6", Fork Extension Inside Width: 6", Length: 96", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: SPB-CBCounterbalance (estimated weight filled 500 pounds) – Fork Mounted Snow Plow Blades – Designed for use with your fork truck, these Snow Plow Blades are multifunctional to work with your existing equipment. No more waiting for daytime snow removal. Simply place the snow blade onto your fork truck and away you go! Installation is as easy as sliding the forks into the fork pockets and securing them to the fork carriage. Prevent damage from obstacles and rough or uneven surfaces with trip springs. Easy angling and backgrade capabilities for optimal performance. Constructed of" rollplate with steel rigs. The blade edge is 5/8" x 6" hardened steel. Counterbalance shipped empty.

Manufacturer: Vestil, Manufacturer Part Number: FE-HS-6-96Fork extensions are the perfect accessory for new or existing forks. The high strength material provides extra support needed to lift large heavy objects with a fork lift. A 3/16in thickness and included lifting handle for simple placement of the extension onto the lifting fork. These models are almost 40% lighter than standard fork extensions. A powder coat finish is included to diminish scraps and minimize abrasion during use. MFG Part# FE-HS-4-63

Manufacturer: Vestil, Manufacturer Part Number: FE-4-90-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension. MFG Part# FE-4-90-P

Manufacturer: Vestil, Manufacturer Part Number: FE-5-90-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension. MFG Part# FE-5-90-P

Manufacturer: Vestil, Manufacturer Part Number: FE-6-90-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension. MFG Part# FE-6-90-P

Manufacturer: Vestil, Manufacturer Part Number: FE-7-108-PProvide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with tapered steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Baked-in powder coat finish for added toughness. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48in existing forks, the fork extension should not exceed 72in). Maximum uniform capacity is 4,000 pounds evenly distributed per pair. MFG Part# FE-7-108-P