Fans, Coolers and Heaters

Manufacturer: Vestil, Manufacturer Part Number: SME-12Blade Diameter: 12", Motor HP: 1/2, AMPS High: 1.1, CFM High: 2,750, CFM Medium: 2,200, CFM Low: 1,600 – Shutter Mounted Exhaust Fans – Inside–building installation only with vents outside. Eliminate need for external framing and shutter. Ideally suited for thin wall buildings. Units are 120V, 1 phase totally enclosed and permanently lubricated. Pull chain switch. No cord. Junction box provided for direct wiring. Meets OSHA standards and is UL listed.

Manufacturer: Vestil, Manufacturer Part Number: VCH-46CWatts: 1500, Volts: 120, Phase: 1, BTU's: 5,120 – Quartz Infrared Spot Heaters – Keep your cooler work areas well heated with these Infrared Heaters. The Quartz tube radiates a blanket of heat in a 60° symmetrical pattern. Unit includes; bright aluminum reflector and end caps, mounting chains, S–hooks and a cordset with plug. Units can be hung from the ceiling with mounting chains or surface mounted. Built–in brackets used in surface mounting allow up to a 45° horizontal tilt adjustment.

Manufacturer: Vestil, Manufacturer Part Number: SME-18Blade Diameter: 18", Motor HP: 1/8, AMPS High: 2.2, CFM High: 5,750, CFM Medium: 4,700, CFM Low: 3,200 – Shutter Mounted Exhaust Fans – Inside–building installation only with vents outside. Eliminate need for external framing and shutter. Ideally suited for thin wall buildings. Units are 120V, 1 phase totally enclosed and permanently lubricated. Pull chain switch. No cord. Junction box provided for direct wiring. Meets OSHA standards and is UL listed.

Manufacturer: Vestil, Manufacturer Part Number: SME-24Blade Diameter: 24", Motor HP: 1/4, AMPS High: 2.5, CFM High: 6,800, CFM Low: 5,000 – Shutter Mounted Exhaust Fans – Inside–building installation only with vents outside. Eliminate need for external framing and shutter. This shutter mounted exhaust fan is ideally suited for thin wall buildings. 24-inch exhaust fan units are 120V, 1 phase totally enclosed and permanently lubricated. Pull chain switch. No cord. Junction box provided for direct wiring. Meets OSHA standards and is UL listed.

Manufacturer: Vestil, Manufacturer Part Number: VCH-57CWatts: 3,000, Volts: 240, Phase: 1, BTU's: 10,240 – Quartz Infrared Spot Heaters – Keep your cooler work areas well heated with these Infrared Heaters. The Quartz tube radiates a blanket of heat in a 60° symmetrical pattern. Unit includes; bright aluminum reflector and end caps, mounting chains, S–hooks and a cordset with plug. Units can be hung from the ceiling with mounting chains or surface mounted. Built–in brackets used in surface mounting allow up to a 45° horizontal tilt adjustment.

Manufacturer: Vestil, Manufacturer Part Number: SME-30Blade Diameter: 30", Motor HP: 1/4, AMPS High: 2.7, CFM High: 7,900, CFM Low: 6,000 – Shutter Mounted Exhaust Fans – Inside–building installation only with vents outside. Eliminate need for external framing and shutter. Ideally suited for thin wall buildings. Units are 120V, 1 phase totally enclosed and permanently lubricated. Pull chain switch. No cord. Junction box provided for direct wiring. Meets OSHA standards and is UL listed.

Manufacturer: Vestil, Manufacturer Part Number: DDB-36The two speed, ball bearing Direct Drive Portable Blower has a totally enclosed motor and spiral wire front and rear guards. Rocker switch. Meets OSHA standards. ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: HPCR-30-PThe two speed, ball bearing High Performance Circulator Fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: HPCR-30-CBlade Diameter: 30", Mounting Style: Ceiling, Amps High: 3.4, CFM High: 8200, CFM Low: 6200 – High Performance Circulator Fan – Two speed, 120V, 1 phase, ball bearing, totally enclosed and permanently lubricated Industrial Duty Circulator Fan. Pull chain switch with a 12 foot long cord and an SJT type 3 conductor. Oscillating models available, contact factory. Several mounting styles available. Meets OSHA standards and is UL listed. 1/3 HP electric motor.

Manufacturer: Vestil, Manufacturer Part Number: HPCR-30-IBlade Diameter: 30", Mounting Style: I–Beam, Amps High: 3.4, CFM High: 8200, CFM Low: 6200 – High Performance Circulator Fan – Two speed, 120V, 1 phase, ball bearing, totally enclosed and permanently lubricated Industrial Duty Circulator Fan. Pull chain switch with a 12 foot long cord and an SJT type 3 conductor. Oscillating models available, contact factory. Several mounting styles available. Meets OSHA standards and is UL listed. 1/3 HP electric motor.

Manufacturer: Vestil, Manufacturer Part Number: HPCR-30-WBlade Diameter: 30", Mounting Style: Wall, Amps High: 3.4, CFM High: 8200, CFM Low: 6200 – High Performance Circulator Fan – Two speed, 120V, 1 phase, ball bearing, totally enclosed and permanently lubricated Industrial Duty Circulator Fan. Pull chain switch with a 12 foot long cord and an SJT type 3 conductor. Oscillating models available, contact factory. Several mounting styles available. Meets OSHA standards and is UL listed. 1/3 HP electric motor.

Manufacturer: Vestil, Manufacturer Part Number: IOH-230VOptional Immersion Oil Heater for cold weather applications with a built in metal reservoir thermostat for automatic heat control. 28-23V single or three (3) phase power, 25 watts. This unit can only be used in steel tanks.

Manufacturer: Vestil, Manufacturer Part Number: IOH-460VOptional cold weather application with a built in metal reservoir thermostat for automatic heat control. 46V three (3) phase power unit, 5 watts. This unit can only be used in steel tanks.

Manufacturer: Vestil, Manufacturer Part Number: LLF-18Optional fan with mounting brackets and power cord for the dock loading lights.

Manufacturer: Vestil, Manufacturer Part Number: PES-124-SOOptional 12/4 SO Power Cord.

Manufacturer: Vestil, Manufacturer Part Number: PES-43-SOOptional 4/3 SO Power Cord.

Manufacturer: Vestil, Manufacturer Part Number: PES-64-SOOptional 6/4 SO Power Cord.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-24-WOThe Oscillating two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-24-POThe Oscillating two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-30-POThe Oscillating two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-30-WOThe Oscillating two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-24-PThe two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: ICRF-30-PThe two speed, ball bearing, Industrial Duty Circulator fan is totally enclosed and permanently lubricated. Pull chain switch. Meets OSHA standards and is ETL & C/UL listed.

Manufacturer: Vestil, Manufacturer Part Number: VFSP-4324-3Provide instant, odor-free heat for indoor and semi-protected outdoor workstations and warehouse areas. Economical electric infrared heat warms only persons and objects, not the air volume. Durable heavy-duty flat panel emitter heating elements are designed for a variety of applications using no glass materials. All models have gold anodized aluminum reflectors, terminal box, protective wire screens, and reinforced front edge and corner construction. Heaters can be adjusted on the hand cart to operate in a horizontal or vertical position for maximizing the infrared heating pattern. Carts consist of a rugged steel design and are equipped with 6in rubber wheels and twin hand grips. Heaters are factory wired for three phase, but can be converted to single phase. MFG Part# VFSP-4324-3