Drum Funnels

Manufacturer: Justrite, Manufacturer Part Number: 8180GASKET 4" FOR 08207 BUNA–N for Safety Drum Funnels.

Manufacturer: Justrite, Manufacturer Part Number: 11002This is a ACCOPAC WASHER–ALL COV. ASSY.

Manufacturer: Justrite, Manufacturer Part Number: 11073This is a GASKET – HOSE.

Manufacturer: Justrite, Manufacturer Part Number: 11022This is a GASKET–PT & QT COVER ASSY.

Manufacturer: Justrite, Manufacturer Part Number: 8183GASKET – TIPOVER KIT for Safety Drum Funnels.

Manufacturer: Justrite, Manufacturer Part Number: 11025 Drum Covers provide an inexpensive way to convert open–top 30– and 55–gallon steel drums into fire–safe receptacles for combustible trash. Only a screwdriver and wrench are needed to attach the cover to a drum, and it can easily be removed when the drum must be emptied. Covers are steel, with a highly chemical–resistant powder coat paint finish. 30–gallon cover will fit drums nominally 18.375" diameter. 55–gallon size will fit drums from 22.5" to 22.75" diameter. On models 26730 and 26750, a replaceable fusible–link assembly inside the cover melts at 165°F to automatically slam the cover shut if there is a fire in the drum to extinguish the flame. To control vapors when disposing of solvent soaked rags and wipes, model 26752 offers a gasketed, latched lid to seal the drum preventing vapor release. A vent is provided to relieve pressure build–up under elevated temperatures, between 3 and 5 psig.

Manufacturer: Justrite, Manufacturer Part Number: 27526This is a HINGE PIN & COTTER KEY for P/N 26750.

Manufacturer: Justrite, Manufacturer Part Number: 27520This is a FUSIBLE LINK.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 11003This is a SCREW TO HOLD ACCOPAC WASHER.

Manufacturer: Justrite, Manufacturer Part Number: 11026Drum Covers provide an inexpensive way to convert open–top 30– and 55–gallon steel drums into fire–safe receptacles for combustible trash. Only a screwdriver and wrench are needed to attach the cover to a drum, and it can easily be removed when the drum must be emptied. Covers are steel, with a highly chemical–resistant powder coat paint finish. 30–gallon cover will fit drums nominally 18.375" diameter. 55–gallon size will fit drums from 22.5" to 22.75" diameter. On models 26730 and 26750, a replaceable fusible–link assembly inside the cover melts at 165°F to automatically slam the cover shut if there is a fire in the drum to extinguish the flame. To control vapors when disposing of solvent soaked rags and wipes, model 26752 offers a gasketed, latched lid to seal the drum preventing vapor release. A vent is provided to relieve pressure build–up under elevated temperatures, between 3 and 5 psig.