All

Manufacturer: Vestil, Manufacturer Part Number: BTA-06007266Uniform Capacity (lbs.): 6000, Height Difference (in.) at 8 degree/17%: 8, Height Difference (in.) at 11 degrees/19%: 11, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 67–1/2, Usable Length (in.) : 66 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08007266Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 8, Height Difference (in.) at 11 degrees/19%: 11, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 67–1/2, Usable Length (in.) : 66 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-09007266Uniform Capacity (lbs.): 9000, Height Difference (in.) at 8 degree/17%: 8, Height Difference (in.) at 11 degrees/19%: 11, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 67–1/2, Usable Length (in.) : 66 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-07007272Uniform Capacity (lbs.): 7000, Height Difference (in.) at 8 degree/17%: 8–1/2, Height Difference (in.) at 11 degrees/19%: 12, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 67–1/2, Usable Length (in.) : 72 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08007272Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 8–1/2, Height Difference (in.) at 11 degrees/19%: 12, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 67–1/2, Usable Length (in.) : 72 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Zing, Manufacturer Part Number: 7240 12 Hole Lockout Hasp is designed to secure switches, valves and other energy devices from use while equipment is being serviced or repaired. The hasp is made from durable coated steel, measures 6.5" x 1.5" and accepts padlocks shackles up to 5/16"

Manufacturer: Zing, Manufacturer Part Number: 7241 24 Hole Lockout Hasp is designed to secure switches, valves and other energy devices from use while equipment is being serviced or repaired. The hasp is made from durable coated steel, measures 10.3" x 1.5" and accepts padlocks shackles up to 5/16"

Manufacturer: Zing, Manufacturer Part Number: 7242 Stainless Steel Hasp is designed to secure switches, valves and other energy devices from use while equipment is being serviced or repaired. The hasp accommodates 7 padlocks. The device measures 3.5"L x 2.25"W.

Manufacturer: Zing, Manufacturer Part Number: 7243Multi-purpose steel lockout cable excels in outdoor or industrial situations. The body dimensions are 1"D x 6"L x 2"W. The lockout accommodates up to 10 padlocks with a max shackle diameter of 9/32". The cable length is 6 ft., and the cable diameter is 1/4".

Manufacturer: Zing, Manufacturer Part Number: 7244 Multi-purpose cable lockout features a durable plastic body and a 3 ft. steel cable. The lockout body measures 1"D x 6"L x 2"W and will accommodate up to 6 padlocks with shackles up to 1/4". The lockout is easy to install: simply route the cable to lockout the device then feed the cable down the center point at the top. When the cable is tight and the source is locked out, squeeze the handle and apply padlock.

Manufacturer: Zing, Manufacturer Part Number: 7245 Multi-purpose cable lockout features a durable plastic body and a 3 ft. di-electric nylon cable. The lockout body measures 1"D x 6"L x 2"W and will accommodate up to 6 padlocks with shackles up to 1/4". The lockout is easy to install: simply route the cable to lockout the device then feed the cable down the center point at the top. When the cable is tight and the source is locked out, squeeze the handle and apply padlock.

Manufacturer: Zing, Manufacturer Part Number: 7246-ZGGate Valve Lockout fits handle diameters from 5'' to 6.5''. The lockout will accommodate up to 3 padlocks with a max shackle diameter of 3/8". Includes the legend "DANGER Do Not Remove." The lockout is made from durable plastic and will withstand temperatures from -20 to 200 F.

Manufacturer: Zing, Manufacturer Part Number: 7247-ZGGate Valve Lockout fits handle diameters from 6.5'' to 10''. The lockout will accommodate up to 3 padlocks with a max shackle diameter of 3/8". Includes the legend "DANGER Do Not Remove." The lockout is made from durable plastic and will withstand temperatures from -20 to 200 F.

Manufacturer: Zing, Manufacturer Part Number: 7248Gate Valve Lockout fits handle diameters from 10'' to 13''. The lockout will accommodate up to 3 padlocks with a max shackle diameter of 3/8". Includes the legend "DANGER Do Not Remove." The lockout is made from durable plastic and will withstand temperatures from -20 to 200 F.

Manufacturer: Zing, Manufacturer Part Number: 7249Zing Small Ball Valve Lockout is made from non-conductive, durable plastic (polyurethane). The lockout fits pipe sizes 3/8" to 1-1/4", and handle sizes 3/8" to 1-1/4".

Manufacturer: Zing, Manufacturer Part Number: 7250Zing Ball Valve Lockout is made from non-conductive, durable plastic (polyurethane). The lockout fits pipe sizes 1-1/2" to 2-1/2", and handle sizes 1-1/2" to 2-1/2".

Manufacturer: Zing, Manufacturer Part Number: 7251Zing Large Ball Valve Lockout is made from non-conductive, durable plastic (polyurethane). The lockout fits pipe sizes 2" to 8", and handle sizes 2" to 8".

Manufacturer: Zing, Manufacturer Part Number: 7252Electrical Panel Handle Lockout prohibits the movement of handles or levers on electrical panels. A yellow nylon base and a flexible stainless steel strip (1'' x 11 4/5'') with 20 holes makes it impossible for the handles to move from their position once locked with a lockout padlock. This lockout is recommended for all handles and levers that do not have a built-in lockout arrangement. Accommodates 1 padlock, with shackles up to 1/4"

Manufacturer: Zing, Manufacturer Part Number: 7253Push Button Lockout provides a safe and effective method for locking out emergency push buttons. The lockout is made from durable plastic (polyurethane) and measures 2.25"H x 4"L x 4"W. The lockout accommodates 1 padlock with a maximum shackle diameter of 1/4". Includes a label with the legend, "DANGER Do Not Remove."

Manufacturer: Zing, Manufacturer Part Number: 7254Oversize Push Button Lockout provides a safe and effective method for locking out emergency push buttons. The lockout is made from durable plastic (acrylic) and measures 3.5"H x 5"L x 3.2"W, with a 1 4/5" diameter hole in the center. The lockout accommodates 1 padlock with a maximum shackle diameter of 1/4".

Manufacturer: Zing, Manufacturer Part Number: 7255Electrical Panel Key Switch Lockout prevents keys from being inserted into switches while lockout is applied. The lockout accommodates 1 padlock with a maximum shackle diameter of 1/4". The padlock is made from durable plastic and measures 3"Hx 3.5"Lx 3.5"W.

Manufacturer: Zing, Manufacturer Part Number: 7256120/277V Clamp-On Circuit Breaker Lockout fits circuit breakers 9/16'' W x 3/8'' L. The lockout measures 1-3/8"H, 2''L, 7/8"W and accommodates 1 padlock, with shackles up to 9/32". The thumbscrew feature allows the device to be installed quickly and easily. The lockout is made from durable plastic (polypropylene) and nylon.

Manufacturer: Zing, Manufacturer Part Number: 7257 480/600V Clamp-On Circuit Breaker Lockout fits circuit breakers 1-7/16 W x 7/16 D. The lockout measures 2.25"H, 3''D, 2.25"W and accommodates 1 padlock, with shackles up to 9/32". The thumbscrew feature allows the device to be installed quickly and easily. The lockout is made from durable plastic (polypropylene) and nylon, and includes a detachable cleat.

Manufacturer: Zing, Manufacturer Part Number: 7258 Oversize Clamp-On Circuit Breaker Lockout fits circuit breakers 2-1/4" W x 7/8" L. The lockout measures 2-3/4"H, 2-5/8''L, 3-3/4"W and accommodates 1 padlock, with shackles up to 9/32". The thumbscrew feature allows the device to be installed quickly and easily. The lockout is made from durable plastic (polypropylene) and nylon, and supports OSHA standard 1910.147.